CFD analysis of a high‐speed unsteady jet

The flow of a high‐speed unsteady jet is analyzed using computational fluid dynamics for an incompressible flow with the k–ε turbulence model. The pseudo‐nozzle concept is applied to the inlet condition with a large pressure gradient. The results show that the time history of the jet development agrees with the experimental data for methane and hydrogen fuels. In addition, the effect of the injection condition on the development of the jet tip is well described with this model. Furthermore, the effects of inlet conditions of the turbulence intensity and scale on the flow are investigated. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(1): 1– 12, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20141     

Optical properties of C60/a-C superlattice structures for solar cell applications

C₆₀/amorphous carbon superlattice structures were fabricated by shutter-controlled molecular beam deposition. The periodic structure of resulted films was confirmed by X-ray diffraction measurements. From the UV–vis reflectance/transmittance measurements, the energy shift of absorption edge was observed in the superlattice structures as a function of their well width. The carbon-based superlattice structure is the useful technique to control the band gap energy of carbon materials.     

Liquefaction and dechlorination of hydrothermally treated waste mixture containing plastics with glass powder

Additive effects of glass powder upon the product yields and chlorine distribution after liquefaction of hydrothermally pretreated mixed waste (HMW) are compared with liquefaction of HMW with any one of water, quartz sand, or glass powder plus water. As a result, addition of either water or quartz sand did not affect liquefaction and dechlorination of HMW. Further, water (5 g) addition did not enhance liquefaction and dechlorination of HMW with glass powder. On the other hand, after liquefaction of HMW with glass powder, the yields of chlorine in the gas and water insoluble constituents decreased and the chlorine yield in the water-soluble constituent increased significantly. Because sodium in glass powder dissolved in a small amount (0.5 g) of water resulted from dehydration of HMW during liquefaction. Further, hydrogen chloride derived from polyvinylchloride in HMW was neutralized by ion exchange between H(+) and Na(+) dissolved in a small amount of water forming NaCl in the Residue (water-soluble) constituent. Therefore, most of chlorine in HMW was removed easily by water extraction of the Residue constituent after liquefaction of HMW with glass powder. Further, upgrading of HMW into the oil constituent was enhanced due to inhibition of production of chlorine containing organic compounds. Accordingly, it was clarified that glass powder was the most effective additive for liquefaction and dechlorination of HMW.     

Nanometer resolution stress measurement of the Si gate using illumination-collection-type scanning near-field Raman spectroscopy with a completely metal-inside-coated pyramidal probe

We have proposed an illumination-collection-type scanning near-field Raman spectroscopy (SNRS) with a completely gold metal-inside-coated (MIC) pyramidal probe without an optical aperture in order to detect the Raman spectra of fine Si devices for local stress measurements. The gold MIC pyramidal probe has been studied to act as a plasmon resonance near-field optical probe with high power using a finite differential time domain (FDTD) simulation and the prototyped SNRS. In the simulation, the propagated optical power can be made available for SNRS. In the experiments, it is clear that the prototyped SNRS enhanced the Si Raman peak signal by plasmon resonance and could measure the Si Raman peak shift by line scanning the Si gate region and the Si active layer. Furthermore, compressive and tensile stresses localized around the Si gate were demonstrated by the Si Raman peak shift with a resolution of about 10 nm. It is clarified that the proposed SNRS has the possibility of detecting the Raman spectra of a local area.     

Interplay Between Vorticity and Chirality Inside the Vortex Core in Chiral p-Wave Superconductors

The vortex core in chiral p-wave superconductors exhibits various properties owing to the interplay between the vorticity and chirality inside the vortex core. In the chiral p-wave superconductors, the site-selective nuclear spin-lattice relaxation rate T ^–1 ₁ is theoretically studied inside the vortex core within the framework of the quasiclassical theory of superconductivity. T ^–1 ₁ at the vortex center depends on the sense of the chirality relative to the sense of the magnetic field. The effect of a tilt of the magnetic field upon T ^–1 ₁ is investigated. The effect of the anisotropy in the superconducting gap and the Fermi surface is then investigated. The result is expected to be experimentally observed as a sign of the chiral pairing state in a superconducting material Sr₂RuO₄.     

A series‐connected hybrid triple converter system

This paper proposes a hybrid multiconverter system aiming at a large‐capacity high‐voltage high‐efficiency converter system free from harmonics in its input/output. The system consists of n (n: integer) GTO converters and a single neutral‐point‐clamped IGBT converter connected in series by n + 1 output transformers. The GTO converters operate in a square‐wave switching mode while the IGBT converter operates in a PWM switching mode. The former produces a base part of the resultant output voltage. The latter not only produces an additional part of the resultant output voltage, but offsets the voltage harmonics generated by the GTO converters. A basic voltage control strategy for the hybrid converter system is proposed, and its validity is verified by experimental results. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 64–70, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20210     

Properties of poly(4-vinylpyridine-co-methyl vinyl ketone) membranes for reverse osmosis

The copolymer prepared from 4-vinylpyridine and methyl vinyl ketone could form a dense and tough membrane which is stronger than cellulose acetate when crosslinked with malonyl dihydrazide (MD) or 2-phenyl-4,6-dihydrazino-s-triazine (PDT), showing a fair performance in reverse osmosis for NaCl and CoCl₂ feed. The relationship between the content of MD or PDT and the membrane performance was investigated. An increase in MD or PDT led to an increase in membrane thickness and water content as well as the performance. A maximum rejection was obtained at ca. 30 mol % MD and ca. 13 mol % PDT based on MVK, and a maximum membrane strength at 20–30 mol % crosslinking agent. A membrane of a lower NaCl rejection tended to be permselective due to the complexation of the CoCl₂ with membrane. About 1:1 copolymer gave membranes of a higher rejection, which may be related to monomer arrangement in the copolymer chain. There methods for the flux improvement were presented and discussed: preparation of a copolymer blend membrane containing a hydrophilic monomer, crosslinking quaternization of membranes with diiodobutane, and oximation of the membrane material in order to introduce hydrophilic groups.     

Energy transfer to water-soluble anionic dyes adsorbed on fluorophore-containing Langmuir-Blodgett films

Langmuir-Blodgett (LB) films composed from chromophore-containing ammonium amphiphiles, water-soluble anionic polymers and anionic fluorescence dyes are prepared. The adsorption behaviour of dye molecules to the LB films is discussed in terms of concentration and chemical structure. Efficient energy transfer from amphiphilic chromophores to the adsorbed dyes is observed.     

Monolithic wavelength converter for ultraviolet light by use of a Gd(x)Y(1-x)Ca4O(BO3)3 crystal

Gd(x)Y(1-x)Ca4O(BO3)3 (GdYCOB) is a promising nonlinear optical crystal that shows high effective nonlinearity d(eff), noncritical phase matching, and high chemical stability. We report on the fabrication and characteristics of a monolithic wavelength converter, which generates ultraviolet light by the incidence of a 1.064 microm near-infrared laser. The converter consists of GdYCOB for third-harmonic generation, KTiOPO4 (KTP) for second-harmonic generation, and a wave plate. GdYCOB has the advantage of an extremely wide angular acceptance bandwidth, whereas KTP exhibits a high effective nonlinear coefficient and a broad temperature bandwidth. Consequently the combination of these crystals results in highly efficient and stable ultraviolet conversion for constructing a compact and robust ultraviolet laser.