X-ray CDF study on the behaviour of the amorphous chain under extension

The behaviour of the amorphous chain in vulcanized natural rubber (NR) and styrene-butadiene rubber (SBR) under extension is studied by means of the cylindrical distribution function (CDF) derived from wide angle X-ray scattering (WAXS). In the case of the highly stretched vulcanized NR where the orientation-induced crystallization took place, the observed WAXS intensity was separated into a crystalline peak component and a broad amorphous one from which the CDF was obtained. The CDF calculated from the broad component shows that some of the amorphous segments of the highly stretched vulcanized NR are extended as fully as the crystalline chains and that the fraction of the segments increases with increasing extension. In the case of SBR, such fully stretched segments as in the case of the vulcanized NR show higher degree of an interchain packing order than those in the vulcanized NR.     

Possibility of superconductivity with highT c in La-Sr-Nb-O system

We prepared La-Sr-Nb-O system samples both in bulk form and as a film, with sharp resistive transitions at temperatures of 228–323 K, depending on the annealing conditions. The sharp resistive transitions might be attributable to superconductivity. Magnetic ordering was observed over a narrow temperature range around 40 K for some of the samples.     

Gas chromatographic separation of wax esters based on the degree of unsaturation

The wax esters of sperm whale head oil have been characterized by gas-liquid chromatography on an APOLAR 10C column according to their carbon number and number of double bonds. The novel technique permits the direct quantitative analysis of saturated and unsaturated wax esters.     

A Practical Model for the Interactions Between Hydrating Portland Cements and Poly-β-Naphthalene Sulfonate Condensate Superplasticizers

The performance of poly-β-naphthalene sulfonate condensate superplasticizer (BNS) as a dispersant for cement in concrete is affected severely by slight differences in the characteristics of the cement. In order to be able to predict these effects, a model for estimating the fluidity of cement paste containing BNS is proposed. This model is based on an assumption that the fluidity of cement paste is proportional to the BNS adsorption amount per surface area of hydrated cement (Ad/Hy). BNS is known to show two types of sorption on hydrated cement: one is the bulk absorption into initial hydrates and the other one is the superficial adsorption onto hydrates. Only the superficially adsorbed BNS is expected to work as a dispersant. By assuming a competitive Langmuir-type adsorption on hydrates between BNS and SO₄²⁻, a simple method to estimate Ad/Hy is developed, with the concentrations of BNS and SO₄²⁻ as the only two independent parameters. The resulting estimates of Ad/Hy show a good correlation with paste flow and its change with elapsed time for a broad range of cements. The SO₄²⁻ concentration in the aqueous phase of the cement paste just after the beginning of the mixing is known to affect the performance of BNS as a dispersant. By using the proposed model to discriminate between the superficial adsorption and bulk absorption of BNS, this phenomenon is explained quantitatively.     

CUDA programs for the GPU computing of the Swendsen–Wang multi-cluster spin flip algorithm: 2D and 3D Ising,Potts, and XY models

We present sample CUDA programs for the GPU computing of the Swendsen–Wang multi-cluster spin flip algorithm. We deal with the classical spin models; the Ising model, the q$q$-state Potts model, and the classical XY model. As for the lattice, both the 2D (square) lattice and the 3D (simple cubic) lattice are treated. We already reported the idea of the GPU implementation for 2D models (Komura and Okabe, 2012). We here explain the details of sample programs, and discuss the performance of the present GPU implementation for the 3D Ising and XY models. We also show the calculated results of the moment ratio for these models, and discuss phase transitions.     

Microstructure of TiO2 and ZnO Films Fabricated by the Sol-Gel Method

Titanium dioxide and zinc oxide films were fabricated by spin-on and dip-coating methods. Both types of films exhibited columnar grains when the single coating was thin, ∼10 nm. The columnar TiO₂ films were dense, as confirmed by their density values calculated from the refractive index and TEM results. The addition of Al cations into the ZnO suppressed grain growth, because Zn had a lower diffusivity in the doped films. The doped ZnO films had nearly the same electrical resistivity as that of the undoped films.     

Thermal behaviour of TiO2-encapsulating polymers

Comparing the thermal properties of TiO₂ encapsulating polystyrene and poly(methyl methacrylate) with those of TiO₂ dispersion polymers it was found that the encapsulating polymers have two thermal relaxation regions. The activation energy of those thermal relaxation regions was determined using the Wunderlich method and it was found that the values are similar to the activation energy for the dynamic dispersion. It is suggested that the low-temperature thermal relaxation is caused by the local change of conformation of molecular chains, while the high-temperature thermal relaxation is similar to that of the normal glass transition temperature including the interaction with TiO₂. In addition, the thermal behaviour near the degradation point in different atmospheres indicates that the encapsulating polymer has a specific structure for adsorbing a large amount of oxygen.     

Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Validation of Platelet Counting Accuracy With the Celltac F Automated Hematology Analyzer

Rapid and accurate analysis of platelet count plays an important role in evaluating hemorrhagic status. Therefore, we evaluated platelet counting performance of a hematology analyzer, Celltac F (MEK-8222, Nihon Kohden Corporation, Tokyo, Japan), that features easy use with low reagent consumption and high throughput while occupying minimal space in the clinical laboratory. All blood samples were anticoagulated with dipotassium ethylenediaminetetraacetic acid (EDTA-2K). The samples were stored at room temperature (18^{^}C–22^{^}C) and tested within 4 hours of phlebotomy. We evaluated the counting ability of the Celltac F hematology analyzer by comparing it with the platelet counts obtained by the flow cytometry method that ISLH and ICSH recommended, and also the manual visual method by Unopette (Becton Dickinson Vacutainer Systems). The ICSH/ISLH reference method is based on the fact that platelets can be stained with monoclonal antibodies to CD41 and/or CD61. The dilution ratio was optimized after the precision, coincidence events, and debris counts were confirmed by the reference method. Good correlation of platelet count between the Celltac F and the ICSH/ISLH reference method (r = 0.99, and the manual visual method (r= 0.93) were obtained. The regressions were y = 0.90 x+9.0 and y=1.11x+8.4, respectively. We conclude that the Celltac F hematology analyzer for platelet counting was well suited to the ICSH/ISLH reference method for rapidness and reliability.