计算机网络技术的发展现状和趋势分析

文章首先概述了计算机网络发展的历程与现状,并分析当今计算机网络发展中存在的一些问题,然后对计算机网络的发展趋势及策略进行总结分析,为当今计算机网络的良性发展出谋划策。     

基于呼叫中心的客户关系管理系统服务流程优化研究

针对钢铁企业物流公司客户关系管理现状,及其客户服务请求处理流程中的不足,提出了基于呼叫中心的钢铁企业最优化客服请求处理流程及其技术实现,给出了平台功能设计,探讨了平台实现的关键技术。该系统充分满足客户满意度以及服务请求处理的及时性,快速性,确切性,可操作性等方面要求。     

基于1553B和外部FLASH实现星上FPGA配置

太阳辐射监测仪作为某卫星载荷之一,其控制系统主要由DSP+FPGA组成,文章利用1553B和外部Flash实现了系统上电后自动配置FPGA;首先,利用1553B通讯芯片上传FPGA和DSP代码到外部RAM,并通过DSP烧写程序分别烧写到Flash的合理区域;系统上电后,DSP从Flash 0x0地址运行,初始化后运行FPGA配置程序,实现FPGA的动态配置;避免了FPGA跑飞后需要重新上电和归零,提高了系统的可靠性;省去了FPGA专用配置EPROM芯片,简化结构,降低了系统成本;实践证明,FPGA加载时间约2分钟,可定时加载或命令控制加载,该方法简单实用,适合星上载荷使用。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

基于MAX16802B的水下相机控制系统设计

水下相机对海洋生物科学研究有重要意义,其控制系统的设计关键在于光源控制方案以及电源效率的提高;提出并实现了一种基于低功耗微控制器、高亮LED光源以及LED控制驱动器MAX16802B的水下相机控制系统,详细介绍了系统组成,并给出了基于低功耗策略的硬件和软件优化设计方案;实验结果表明,该设计方案电路结构简单,稳定性好,电源效率达75%以上,能够满足长时间水下拍摄工作;在实际海下测试中,按20分钟的拍摄间隔需求,水下相机可连续工作2个月以上。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。     

NAND Flash内存设备的读写控制设计

针对NAND Flash闪存设备在嵌入式系统中的应用,详细分析了Flash闪存设备的接口设计方法。根据NANDFlash的读写特性,采用Hynix半导体公司的Flash H27U1G8F2B,设计一种闪存数据读写控制方法和驱动流程。该方法能够应用于各种NAND Flash的读写控制,具有良好的程序结构和较高的代码运行效率。     

Retrospective adaptive prefetching for interactive Web GIS applications

A major task of a Web GIS (Geographic Information Systems) system is to transfer map data to client applications over the Internet, which may be too costly. To improve this inefficient process, various solutions are available. Caching the responses of the requests on the client side is the most commonly implemented solution. However, this method may not be adequate by itself. Besides caching the responses, predicting the next possible requests from a client and updating the cache with responses for those requests together provide a remarkable performance improvement. This procedure is called “prefetching” and makes caching mechanisms more effective and efficient. This paper proposes an efficient prefetching algorithm called Retrospective Adaptive Prefetch (RAP), which is constructed over a heuristic method that considers the former actions of a given user. The algorithm reduces the user-perceived response time and improves user navigation efficiency. Additionally, it adjusts the cache size automatically, based on the memory size of the client’s machine. RAP is compared with four other prefetching algorithms. The experiments show that RAP provides better performance enhancements than the other methods.     

Molecular dynamics-based prediction of boundary slip of fluids in nanochannels

Computational modeling and simulation can provide an effective predictive capability for flow properties of the confined fluids in micro/nanoscales. In this paper, considering the boundary slip at the fluid–solid interface, the motion property of fluids confined in parallel-plate nanochannels are investigated to couple the atomistic regime to continuum. The corrected second-order slip boundary condition is used to solve the Navier–Stokes equations for confined fluids. Molecular dynamics simulations for Poiseuille flows are performed to study the influences of the strength of the solid–fluid coupling, the fluid temperature, and the density of the solid wall on the velocity slip at the fluid boundary. For weak solid–fluid coupling strength, high temperature of the confined fluid and high density of the solid wall, the large velocity slip at the fluid boundary can be obviously observed. The effectiveness of the corrected second-order slip boundary condition is demonstrated by comparing the velocity profiles of Poiseuille flows from MD simulations with that from continuum.     

Development of human-machine interface for teleoperation of a mobile manipulator

Human-robot control interfaces have received increased attention during the past decades for conveniently introducing robot into human daily life. In this paper, a novel Human-machine Interface (HMI) is developed, which contains two components. One is based on the surface electromyography (sEMG) signal, which is from the human upper limb, and the other is based on the Microsoft Kinect sensor. The proposed interface allows the user to control in real time a mobile humanoid robot arm in 3-D space, through upper limb motion estimation by sEMG recordings and Microsoft Kinect sensor. The effectiveness of the method is verified by experiments, including random arm motions in the 3-D space with variable hand speed profiles.