Variable energy positron beam study of Xe-implanted uranium oxide

Doppler broadening of annihilation gamma-line combined with a slow positron beam was used to measure the momentum density distribution of annihilating pair in a set of sintered UO₂ samples. The influence of surface polishing, of implantation with 800-keV ¹³⁶Xe²⁺ at fluences of 1 × 10¹⁵ and 1 × 10¹⁶ Xe cm^?2, and of annealing were studied by following the changes of the momentum distribution shape by means of S and W parameters. The program used for this purpose was VEPFIT. At the two fluences in the stoichiometric as-implanted UO₂, formation of Xe bubbles was not detected. The post-implantation annealing and over-stoichiometry in the as-implanted sample caused Xe precipitation and formation of Xe bubbles.     

Conformational study of the sequential (Tyr-Glu)n copolymer in aqueous solution

Conformational properties of the sequential poly(Tyr-Glu) copolymer in aqueous solution were investigated as a function of pH. No transition could be detected over the range pH 13-10.5. Below pH 10.5 an aggregation process takes place, causing a drastic change in all optical properties of the polymer (optical rotation, c.d. and u.v. spectra). By means of i.r. spectroscopy in D₂O, aggregates were found to be in antiparallel β conformation. The c.d. spectrum of β-aggregates is very similar to that of α-helical poly(l-tyrosine) in organic solvents, except in the 280 nm region. In addition the aggregation process is accompanied by a strong hyperchromic effect in the 277 nm absorption band. Using space-filling models, different arrangements of the chains in the β-aggregates were shown to be realizable. All result in a close stacking of tyrosyl phenyl groups, which can explain the drastic changes in all optical properties.     

Evaluation of SRD1000 Superconductive Reference Devices

No Heading Recently, a superconductive reference device, SRD1000, with ten reference materials has been developed to enable simplified in situ calibration of interpolating thermometers. We report on the evaluation of SRD1000 prototypes at various laboratories. The devices were built and tested by HDL and KOL, calibrated at NMi-VSL and then distributed to other partners where they were re-calibrated against the local realisations of the PLTS-2000 or laboratory scales. As a result, we obtained data on the superconductive transition temperatures, widths and shapes for four different devices. Reproducibility, sharpness of the transitions, supercooling and sensitivity to magnetic fields are evaluated. This leads to estimates of the uncertainty in determination of the transition midpoint and temperature.PACS numbers: 07.20.Dt, 07.20.Mc, 74.62.–c, 74.70.Ad     

High transmission efficiency for surface plasmon resonance by use of a dielectric grating

The efficiency of the transmission of surface plasmon waves by use of a dielectric diffraction grating is discussed. The Kretschmann device allows us to obtain a surface plasmon resonance that consists of an absorption peak in the reflection spectrum. When surface plasmon resonance occurs, the TM-polarization mode of the incident electromagnetic wave is neither transmitted nor reflected. The procedure to transform an 4bsorption peak into a transmission peak is described. Transmittivity of 68% is obtained for a simple structure that consists of a thin-film layer of Ag coated on a volume diffraction grating and embedded between two dielectric media. The results presented herein were obtained by numerical simulations that were carried out by use of an algorithm based on the rigorous coupled-wave theory.     

TEM characterization of some crude or air heat-treated SiC Nicalon fibres

Commercial Nicalon fibres were prepared by thin transverse sectioning and studied by transmission electron microscopy. A progressive tilting of the incident beam allows us to explore the selected-area diffraction (SAD) pattern along two orthogonal directions, increasing the tilting angle (dark-field (DF) imaging). The lattice fringes technique was also used. The samples were Nicalon 001, 101 and 201 fibres, the latter also being studied after heat treatment in air at 1300° C for 48 h. The SAD pattern of the 001 fibre only shows the SiC, 1 1 intense halo whereas the other samples show all the SiC (1 1 1, 2 2 0 and 31 1) strongly scattered beams, indicating a microcrystalline state. Correspondingly, DF imaging does not indicate any localized measurable scattering domain for 001. Only bright dots can be seen, less than 1 nm in size. The other fibres show SiC microcrystals respectively 2 nm (1 01 ), 3 nm (201 ) and up to 7 nm (heat-treated 201) in extent. Free aromatic carbon, shaped in small units less than 1 nm in size fills up the interstices between SiC. These units tend to lie flat on SiC. In heat-treated fibres, they form incomplete layers around the edges. In addition, the heat-treated 2 01 fibre show a 1m thick layer of cristobalite at the fibre surface. These crystals are polytypes.     

Development of an experimental technique to assess the permeability of metal coated polymer films

The experimental time required to measure water vapour permeability of barrier film using the cup method is extremely long. In this study, a new technique is proposed, based on light transmission. This fast and accurate method was first validated using model films constituted of aluminized PET (polyethylene terephthalate) with aluminium layers of different thicknesses (<100 nm). It was possible to show that the ‘illuminating’ method could advantageously be employed to control the film’s barrier properties during their fabrication. In a second step, the method was tentatively used to measure the changes in barrier properties over time, when the samples are submitted to severe hydrothermal ageing (70 °C, 90% relative humidity [RH]). It was concluded that the complex degradation mechanism prevents accurate measurement while ageing.     

Role of the pore fluid in crack propagation in glass

We investigate pore fluid effects due to surface energy variation or due to chemical corrosion in cracked glass. Both effects have been documented through experimental tests on cracked borosilicate glass samples. Creep tests have been performed to investigate the slow crack propagation behavior. We compared the dry case (saturated with argon gas), the nonreactive water saturated case (commercial mineralized water), and the distilled and deionized water saturated case (pure water). Chemical corrosion effects have been observed and evidenced from pH and water composition evolution of the pure water. Then, the comparison of the dry case, the mineral water saturated case, and the corrosion case allow to (i) evidence the mechanical effect of the presence of a pore fluid and (ii) show also the chemical effect of a glass dissolution. Both effects enhance subcritical crack propagation.     

Monitoring of chloride and activity of glycine receptor channels using genetically encoded fluorescent sensors

Genetically encoded probes have become powerful tools for non-invasive monitoring of ions, distributions of proteins and the migration and formation of cellular components. We describe the functional expression of two molecular probes for non-invasive fluorescent monitoring of intracellular Cl ([Cl]i) and the functioning of glycine receptor (GlyR) channels. The first probe is a recently developed cyan fluorescent protein-yellow fluorescent protein-based construct, termed Cl-Sensor, with relatively high sensitivity to Cl (Kapp approximately 30mM). In this study, we describe its expression in retina cells using in vivo electroporation and analyse changes in [Cl]i at depolarization and during the first three weeks of post-natal development. An application of 40mM K+ causes an elevation in [Cl]i of approximately 40mM. In photoreceptors from retina slices of a 6-day-old rat (P6 rat), the mean [Cl]i is approximately 50mM, and for P16 and P21 rats it is approximately 30-35mM. The second construct, termed BioSensor-GlyR, is a GlyR channel with Cl-Sensor incorporated into the cytoplasmic domain. This is the first molecular probe for spectroscopic monitoring of the functioning of receptor-operated channels. These types of probes offer a means of screening pharmacological agents and monitoring Cl under different physiological and pathological conditions and permit spectroscopic monitoring of the activity of GlyRs expressed in heterologous systems and neurons.     

Determination of Materials Selection Performance Indices Through the Combination of Numerical Modeling and Optimization Methods

After translation, the first stages traditionally involved in the materials selection are filtration and classification, which require formulation of criteria (constraints or objectives) deduced from information written in the set of material requirements. These criteria, which are representative of the behavior of the material and the studied structure, must be formulated analytically in order to be used during selection stage. However, for complex behavior, analytical processing of models is no longer possible and it can be replaced by a combination of numerical resolution methods and an optimization method which make it possible to obtain approximate formal expressions of the criteria. In this paper, a complete selection method is proposed. The method is applied to the constraints as well as the objectives, in order to carry out the filtration and classification stages at the same time. The study of the thermomechanical behavior of a machine tool frame has been used to demonstrate the validity of the proposed method.