Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

A Device for Measurements of Dielectric Characteristics of Liquid Crystalline Materials, Solid Substances, and Their Melts

The device developed allows one to measure the dielectric characteristics of solid substances and their melts at frequencies of 20–20000 Hz and in a wide temperature range of 20–250°C. The measured temperature dependencies of the dielectric permittivities of several molecular and liquid crystals (stilbene, diphenyl, naphthalene, cholesterylpelargonate, and 8OCB) are presented.     

Scrubbing Hydrogen Sulfide from Gases. A Rational Approach

Worsening of the environmental situation in many regions of Russia in recent decades is to a great degree due to production and refining of oil and gas with a high hydrogen sulfide content. Industrial methods of utilization of hydrogen sulfide are extremely irrational: it is either burned in flares or used for production of sulfur whose quality and quantity pose new problems related to its use.     

TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

Operation of an experimental facility for fabrication of fuel elements and fuel assemblies of the bor-60 containing vibrocompacted fuel

Translated from Atomnaya Énergiya, Vol. 67, No. 5, pp. 320–323, November, 1989.     

The effect of large strains on ageing of a filled elastomer

Strain endurance experiments on a filled elastomer were performed at several temperatures. It was found that superimposed prestraining accelerated the ageing process. This process was caused by microstructural changes in the elastomer. In order to evaluate the mechanical properties of a filled elastomer it is necessary to take into consideration not only the ageing effects but also the loading history.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Analysis of the Safety of the Burial Grounds of Decontamination Waste of Chernobyl Origin in the Territory of Belarus

Unsatisfactory conditions of storage of decontamination waste (DW) in the storages formed in the territory of Belarus after the Chernobyl accident require the evaluation of the level of protection of the environment and population. The potential hazard of the decontamination waste burial grounds (DWBGs) has been evaluated based on the use of a generalized multichamber model that was verified by comparing the calculation results and the results obtained by the American (GW SCREEN) model. The characteristics of the 24 largest and most hazardous DWBGs are given and the evaluations of their safety are presented. The zones of influence of these storages, whose size varies from 100 to 330 m, have been determined. The reliability of the prediction evaluation of a possible hazardous radioactive contamination of water near the storages has been verified using the Dudichi DWBG as an example.     

Solution of the Inverse Problems of Scattering of Electromagnetic Fields by Elongated Defects

We formulate the inverse problem of scattering of electromagnetic fields by thin defects and analyze numerical algorithms used for its solution. It is shown that, in the two-dimensional case, the shape of a thin defect is completely determined by the scattered field given on a certain curve for a fixed value of the wave number. For the solution of the inverse scattering problem, we propose to use the procedure of iterative regularization based on the gradient methods. We deduce expressions for the Fréchet derivative of the operator of direct scattering problem with Dirichlet conditions imposed on the surface of a scatterer.