Solving minimum spanning tree problem with DNA computing

Molecular programming is applied to minimum spanning problem whose solution requires encoding of real values in DNA strands. A new encoding scheme is proposed for real values that is biologically plausible and has a fixed code length. According to the characteristics of the problem, a DNA algorithm solving the minimum spanning tree problem is given. The effectiveness of the proposed method is verified by simulation. The advantages and disadvantages of this algorithm are discussed.     

变形分数傅里叶变换双随机相位加密技术

提出变形分数傅里叶变换双随机相位编码技术。详细阐述了编码与解码的光学原理,由于变形分数傅里叶变换比分数傅里叶变换多两个分数傅里叶变换阶次,所以,变形分数傅里叶变换双随机相位编码技术比分数傅里叶变换双随机相位编码技术增加了两重密钥,进一步提高了系统的保密性能。并进行了计算机模拟验证,结果证明该原理是正确的。     

ALA光动力学治疗对C6胶质瘤细胞凋亡的影响

目的:通过细胞学水平研究不同剂量ALA光动力学治疗对C6胶质瘤细胞细胞凋亡的影响。方法:以不同剂量的ALA(10μg/ml、20μg/ml、40μg/ml、80μg/ml、160μg/ml)与C6胶质瘤细胞一起培养,随后以630nm半导体激光200mW/cm2,照射肿瘤细胞,照射20分钟,及与不用光敏剂单照激光、单用光敏剂不照光、不用光敏剂不照激光空白对照组比较。以流式细胞仪及倒置微镜、电镜观察促使肿瘤细胞凋亡或死亡的差别,寻找促使肿瘤细胞凋亡或死亡的最小合适剂量。结果:对照组没有细胞凋亡,ALA-PDT组随着剂量的增加细胞凋亡数增加。尤其晚期凋亡数明显增加,用药剂量增加至40μg/cc才能达到活细胞少于50%,即使剂量增加到160μg/cc,还是有19.7423的活细胞存在。结论:单纯用ALA激光PDT治疗不能达到完全将肿瘤细胞杀灭,ALA40mg/kg激光光动力学治疗才能得到明显的治疗效果。     

覆铜板的弯曲强度与弯曲弹性模量初探

论述了覆铜板的弯曲强度和弯曲弹性模量的测试原理和测试方法,并运用弯曲强度和弯曲弹性模量对应基材性能表现的模型分析方法,初步探讨了影响覆铜板的弯曲强度和弯曲弹性模量的因素,继而找出提高覆铜板的弯曲强度和弯曲弹性模量的方法,以改进覆铜板的性能。     

Theoretical Analysis and Simulation of BJFET Obstructive Characteristics

A new bipolar junction field-effect transistor (BJFET) was described. The theoretical analysis and computer simulation of BJFET obstructive characteristic are achieved. The gate bias voltage affects the BJFET obstructive voltage greatly. The BJFET obstructive characteristic is relevant to structure parameters of channel width W and channel length L. The decrease-bias-voltage operation can weaken the device obstructive characteristic. The forward turn in device forward obstructive region can also affect the BJFET obstructive characteristic. BJFET has a good high temperature obstructive characteristic and can be applying to high temperature status as high voltage switch devices.     

Characteristics of Schottky Barrier Junction Based on Hexagonal Microtube ZnO

Hexagonal microtube ZnO was firstly grown on single crystal p-Si (111) substrates by hydrothermal method, and fabricated Ag/n-ZnO and Au/n-ZnO Schottky junction. Schottky effective barrier heights were calculated by I-V measurement. It is confirmed that the presence of a large amount of surface states related possibly to lattice imperfections existed near the surface leads to the pinning of the surface Fermi level at 0.35 eV below the conduction-band edge. Then the fabricated Schottky barrier junctions are evaluated for their use as UV photodetectors.     

铸铝表面激光制备纳米Al2O3/TiO2镀层的耐磨性研究

本文对铸铝(ZL104)表面激光镀覆纳米Al2O3/TiO2镀层的耐磨性进行了研究,结果表明其相对耐磨性比同样基材表面热喷涂Al2O3/TiO2镀层有明显改善。按ASTMG99及DIM50324测试标准,在选定的试验条件下,激光镀覆层的相对磨损体积比热喷涂层减少了92%。主要是因为激光快速镀覆工艺及引入纳米材料的“纳米效应”的综合作用结果。     

抗辐照SOI256kB只读存储器的ESD设计

ESD设计技术已成为业界提升SOI电路可靠性的一个瓶颈技术。文章介绍了一款具有抗辐照能力、基于SOI／CMOS工艺技术研制的容量为256kB只读存储器电路的ESD设计方案。结合电路特点详细分析了其ESD设计的难点,阐述了从工艺、器件和电路三个方面如何密切配合,进行SOI电路ESD设计的分析思路和解决方法。电路基于0．8...     

B2O3-Li2O掺杂对丝网印刷Bao.6Sr0.4TiO3厚膜微观结构及介电特性的影响

采用丝网印刷工艺并通过有效掺杂B2O3-Li2O制备出了一致性和可重复性良好的Ba0.6Sr0.4TiO3(BST)厚膜.系统研究了B2O3-Li2O掺杂对BST厚膜的低温烧结特性、微观结构、相构成及介电性能的影响.结果表明:随着B2O3-Li2CO3含量的增加,BST厚膜的烧结温度逐渐降低,晶粒尺寸和介电常数显著变小...     

飞秒激光脉冲序列互相关的数值模型与分析

为研究飞秒激光超短脉冲序列在空气中传输的时间相干特性,根据飞秒脉冲序列的传播理论和空气折射率Ciddor公式,建立了飞秒激光脉冲序列间脉冲在空气中传播的互相关数值模型。根据该模型可以得到不同光谱分布、不同光程差和不同大气条件下的飞秒脉冲序列间脉冲的互相关图形。数值模拟结果表明随着脉冲间光程差的增大,由于色散的原因,互相关图形加宽和啁啾,并且峰能量减小;然而当光程差不变,仅改变大气条件时,互相关图形仅仅作线性移动,没有任何额外线性加宽或啁啾。飞秒光学频率梳具有非常高的时间相干性,并且飞秒脉冲间的互相关图形只取决于激光器光源的光谱分布。