Behaviour of Hydrogen in Nano-transition Metals

Nanocrystalline transition metals were prepared with Ar+H2 arc plasma method. The hydrogenmust be used during preparation to get a special nanrvparticles. The hydrogen plays an importantrole in the structure and state of nanocrystalline transition metals. The state of hydrogen andthe change of the nanocrystalline metal structure caused by hydrogen are called the behaviour ofhydrogen in nano-transition metals which includes the ability and function of storing hydrogenin the metals.     

较高应变速率下结构钢屈服强度的估计

本文给出了一种考虑应变速率效应时材料屈服强度近似求法，它依据两组低应变速率的拉伸试验数据，对其它应变速率下的屈服强度进行估计，并具有良好的精度。     

关于不确定的对称组合系统的稳定化控制器与观测器的设计

本文研究了不确定的对称组合系统的稳定化控制器与观测器的设计问题，给出一种设计稳定化控制器与观测器的方法，在这种设计方法中，使给定的带有不确定性的对称组合系统稳定的状态反馈增益矩阵和观测器增益矩阵可由低阶代数Ｒｉｃｃａｔｉ方程的解导出。     

中国水稻害虫发生与防治研究进展

本文介绍了我国水稻害虫发生的种类，主要稻虫的种群消长，对水稻危害的损失，在各个不同年代，通过研究和防治，总结出对抗虫品种评价与利用的研究发展迅速，新农药的试验开发效果明显。７０年代以来，按我国稻区生态条件和稻虫为害的特点，形成了江淮、太湖平原、川西平原、洞庭湖平原和珠江三角洲五大稻区的水稻病虫综合防治技术体系，主要技术路线是以农业防治为基础，抗性品种为主体，依靠经济防治指标，协调农药防治和利用天敌     

A greedy algorithm to determine the number of transporters in a cyclic electroplating process

This paper presents a local optimization algorithm for minimizing the number of transporters required for material handling in a cyclic processing line. Within a cycle, a given set of transportation operations must be performed. Each operation consists of picking up a work-in-process job at a stage and delivering it to the next stage. The length of time that a job can remain at a particular stage is restricted by a time window. The transporters that perform the operations move on a shared track, and traffic collisions must be avoided during their movements. To avoid traffic collisions, the operations are partitioned into groups, where each group is served by a single transporter. A local optimal solution is obtained when the group sizes are maximized. We show that the duals of the linear programming subproblems formulated in the process of maximizing the group sizes are specially structured shortest-path problems. This leads to an effective search method for the maximization problem. Conditions when die proposed algorithm achieves die global optimal solution are discussed. The algorithm's performance is evaluated on both randomly generated test problems and benchmark problems.     

简化源项计算方法

利用程序包STCP估算核电厂在发生严重事故情况下释放到环境的放射性源项需要耗费大量计算机时间和费用。所以,对所有感兴趣的事故情景完成源项程序包的计算实际上是不可能的。为此,发展了一个简化源项计算方法。它的基本思想如下:首先利用STCP计算几个选择的序列,然后根据放射性释放和事故进程的特点处理和分析由STCP计算得到的结果,得出一些特定参数,其它事故序列的源项能够通过这些参数的重新组合得到。     

半导体陶瓷致冷材料的性能与结构

采用新的陶瓷工艺技术,在气氛保护条件下,通过固相烧结反应法制备出温差电多晶材料。对膺三元固溶体化合物 P 型(72%Sb_2Te_3+25%Bi_2Te_3+3%Sb_2Se_3)和 N 型(90%Bi_2Te_3+5%Sb_2Te_3+5%Sb_2Se_3)的掺杂陶瓷样品进行了性能与结构研究。找到了最佳工艺制度。样品性能参数为:N 型:α=186μV/K σ=1250Ω~(-1)·cm~(-1) λ=14.7mW/(cm.K) Z=2.9×10~(-3)/KP 型:α=220μV/K σ=900 Ω~(-1)·cm~(-1) λ=14.0mW/(cm.K) Z=3.1×10~(-3)/K     

固定电子分立元器件用胶粘剂E—4X的研制

介绍了一种不同于灌封材料，具有触变性，粘接性能优良，使用方便的固定电子分立元器件用胶粘剂Ｅ－４Ｘ。与国外同类产品Ｅｐ－４３３ｘ胶粘剂对比，其综合性能优于Ｅｐ－４３３胶粘剂。     

Fracture of Aramid Fiber/Epoxy Resin Micro Composites

Kevlar-49 fiber was modified through cold air plasma treatment and plasma grafting with acrylic monomers. Fracture of aramid fiber/epoxy resin micro composites has been studied by means of single fiber pull-out test. Tow types of pull-out curves are correlated with the different failure modes. A polyacrylic acid-co-ethyl acrylate graft layer can improve the adhesion and protect the fiber from damage caused by interfacial stresses.     

CT9800机器操作使用经验介绍

本文重点介绍了在进行CT断层X-线摄影时,如何灵活应用标准、软组织和骨结构等三种重建图像的软件,既能显著缩短图像重建的时间,又不会遗漏病变的影像。