聚萘二甲酸乙二醇酯(PEN)的研究及发展

综述了聚萘二甲酸乙二醇酯(PEN)的发展历史,合成工艺,应用领域及其与PET的性能比较。     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

Integrated size and topology optimization of skeletal structures with exact frequency constraints

The present paper studies the integrated size and topology optimization of skeletal structures under natural frequency constraints. It is found that, unlike the conventional compliance-oriented topology optimization problems, the considered problem may be strongly singular in the sense that the corresponding feasible domain may be disconnected and the global optimal solutions are often located at the tips of some separated low dimensional sub-domains when the cross-sectional areas of the structural components are used as design variables. As in the case of stress-constrained topology optimization, this unpleasant behavior may prevent the gradient-based numerical optimization algorithms from finding the true optimal topologies. To overcome the difficulties posed by the strongly singular optima, some particular forms of area/moment of inertia-density interpolation schemes, which can restore the connectedness of the feasible domain, are proposed. Based on the proposed optimization model, the probability of finding the strongly singular optimum with gradient-based algorithms can be increased. Numerical examples demonstrate the effectiveness of the proposed approach.     

脂肪酸系列表面活性剂的研究进展

概括和综述了4大类10余个脂肪酸系列表面活性剂的合成、性能和应用现状，重点评述了烷醇酰胺及其衍生物、乙氧基化脂肪酸甲酯、脂肪酸甲酯磺酸盐、N-酰基ED3A、氨基酸、咪唑啉、甜菜碱、双子表面活性剂等脂肪酸系列表面活性剂的研究进展。此系列表面活性剂易生物降解、安全、多功能和高效能。     

PVC╱NBR╱BR三元共混弹性体的制备

采用结合丙烯腈含量为26％的NBR、分子量适中的悬浮法Ⅲ型PVC和BR共混,制得了综合性能较PVC/NBR并用胶优异的弹性体。优选的工艺条件为:PVC/NBR/BR=30/60/10(质量比);补强剂选用炭黑40份,超细碳酸钙50份,轻质碳酸钙20份;硫化体系选用过氧化物加少量硫磺;混炼温度为140—170℃,混炼时间为10—15min。通过电子显微镜和动态力学分析,弹性体存在两个T,PVC为分散相,橡胶为连续相。     

基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

Interbay物料自动搬运系统性能分析

Interbay物料自动搬运系统的运行效率对于晶圆制造系统影响较大,研究Interbay物料自动搬运系统的绩效具有较大的意义[1]。该文以带有捷径的单闭环背脊式布局的物料自动搬运系统为研究对象,通过问题描述,简化、假设将实际问题抽象为导引运输模型。然后,建立数学模型,采用Dijkstra算法确定工件搬运的最短路径。最后,利用Arena仿真软件建立含有导引运输设备的模型,采用控制变量法探究小车数量小车占用轨道的方式、调度规则等因素对于产出的影响,发现对于本文中的模型,其它条件相同时,搬运系统采用Release-at-end的控制方式,系统最大搬运量越大。     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。     

Photocross-linking of low-density polyethylene. III. Supermolecular structure studied by SALS

The supermolecular structure of photocross-linked polyethylene (XLPE) has been studied by small-angle light scattering (SALS). The data show that the spherulitic structure of XLPE gradually deteriorates with increasing degree of cross-linking and increasing irradiation temperature from well-developed spherulites to rodlike aggregates and disordered lamellar structures. A photocross-linked sample of PE has lower crystallinity, smaller crystallites, and smaller spherulites than does the original sample. At high degrees of cross-linking, the SALS patterns show little or no spherulitic structure. Results with photocross-linked polyethylene demonstrate that the overall effect of cross-linking on the morphological structure is similar to that of an increase in molecular weight of the polymer. © 1993 John Wiley & Sons, Inc.     

浅谈构建安全的长江海事电子政务网络体系

电子政务已成为长江海事局工作信息化的重点工程。对长江海事电子政务网络建设的基础安全服务设施、安全管理保障体系、安全技术支撑平台和响应与恢复机制等问题进行了分析,并结合实践经验,提出了建立安全可靠的长江海事电子政务网络体系的对策。