Properties of poly(n‐butyl methacrylate) prepared by reverse atom transfer radical polymerization in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in waterborne media using Cu(II) complexes with azo initiators (i.e., reverse ATRP) was conducted. The influence of several factors, such as surfactant, catalyst, and reaction time, on the stability of the emulsion, the particle size, the morphology of the emulsion particles, and the control of the polymerization was investigated. The results showed great differences between ATRP and conventional emulsion polymerization, especially the nucleation mechanism and the kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1542–1547, 2003     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

Decolorisation and mineralisation of CI Reactive Black 8 by the Fenton and ultrasound/Fenton methods

The effects of pH, ferrous ion and hydrogen peroxide dosage on the decolorisation and mineralisation of CI Reactive Black 8 by the Fenton process with/without ultrasonic irradiation were investigated. It was verified that the presence of ultrasonic irradiation did not enhance the decolorisation of CI Reactive Black 8 significantly by Fenton's reagents, but it enhanced the chemical oxygen demand removal efficiency. The enhancement was more pronounced for lower (<0.89 mm) or higher (>1.78 mm) ferrous ion dosage. The optimal pH for chemical oxygen demand removal was 3.0. Chemical oxygen demand removal efficiency increased with the increasing H₂O₂ dosage and reached the highest level at 5.88 mm, but further increase in H₂O₂ dosage would not increase removal efficiency significantly.     

HIPS-g-PMMA的合成及其在HIPS/PVC共混体系中的增容作用

采用自由基引发的溶液聚合法合成了高抗冲聚苯乙烯接枝聚甲基丙烯酸甲酯(HIPS-g-PMMA)增容剂，考察了引发剂用量、反应温度及反应时间对增容剂的接枝率及支链摩尔质量的影响；同时对增容剂对HIPS／PVC共混体系的增容效果作了考察。结果表明：最佳反应条件是反应温度80℃，反应时间4h，引发剂用量以0．2～0．25g为宜；增容剂HIPS-g-PMMA对HIPS／PVC共混体系表现出较好的增容效果，共混物的拉伸强度、屈服强度及断裂伸长率明显增加，冲击强度增大，电镜照片显示两相界面变得更加模糊。     

改性5A分子筛对水中As(Ⅴ)的吸附作用研究

改性5A分子筛是一种高效吸附材料。实验用5A分子筛作为载体,制备了该吸附剂,并表征了其基本性质。结果表明,改性5A分子筛对As(Ⅴ)具有很高的吸附率和选择性;室温下,pH=7时,改性5A分子筛吸附As(Ⅴ)的吸附等温线符合Langmuir型和Freundlich型。     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

Preparation,characterization and salt-resistance of a coal based super absorbent composite

Potassium humate was extracted from brown coal.A novel super absorbent composite,poly (acrylic acid-co-acrylamide)/potassium humate (PAA-AM/KHA),was prepared by graft polymerization of acrylic acid,acrylamide and coal based potassium humate using N,N'-methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator.The effects of reaction temperature,degree of neutralization of the poly (acrylic acid) and the amounts of crosslinker,initiator and potassium humate were investigated.Salt resistance tests were also carried out.The composite prepared under optimal conditions had a potassium humate content of 10% and exhibited a water absorption of 770 g/g in distilled water,and 349,286 and 41 g/g in 0.5 mol/L KC1,MgCl2 and AlCl3 solutions respectively.The results indicate that the salt resistance of PAA-AM/KHA was superior to that of poly (acrylic acid-co-acrylamide) because of the collaborative effect of functional groups of the coal based potassium humate.The PAA-AM/KHA micro powder was characterized by IR spectroscopy and the micrographic surface was characterized by scanning electron microscopy.Introduction of potassium humate into the poly (acrylic acid-co-acrylamide) structure creates a composite more suitable for use as a water-managing material in the renewal of arid and desert environments.The salt resisting property of the composite is improved,production costs are reduced and the growth stimulant effect is still present.     

多重网格法在地球物理正反演应用研究中的进展

现阶段地球物理三维勘探面临越来越复杂的问题,其要求更精细的三维网格剖分,现有的一些方法随着网格节点的增加其收敛速度相应减慢。对于应用中更复杂实际模型、更细密网格剖分以及更快收敛速度要求,难于有进一步提高。要有所突破,需借助计算数学最新进展,引入新的高效算法。多重网格法是近二十年迅速发展的一种求解微分方程近乎最优的新算法。本文首先简单介绍了多重网格法基本原理和运算格式,着重介绍了当前国内外多重网格法在地球物理正反演中的应用成果和发展现状。此外,对多重网格法在地球物理正反演中的应用前景及发展趋势进行了展望。