美国国家公园申报准则及审议程序

本文所讲述的是美国国家公园服务中心在评估申请提案、制定审查方案过程中所应用的各种标准和准则 ,同时也列出了一些认识、保护未列入国家公园体系中其他重要资源的途径和方法。     

QFT control design for an approximately linearized pneumatic positioning system

A block‐oriented approximate feedback linearization for control of a pneumatic cylinder positioning system is introduced and a rather detailed discussion is presented on the uncertain linearization residual characterization. It is shown that making use of the characterized gain–phase information of the linearized system leads to a more reasonable trade‐off between performance and stability in the QFT control design and thus results in high control performance. Simulation and experimental results are shown. Copyright © 2003 John Wiley & Sons, Ltd.     

跳时超宽带无线电的性能分析

超宽带脉冲无线电是无线通信领域的一种全新技术,有着广阔的应用前景.它是一种基带无载波短脉冲,不同于使用正弦载波的传统通信系统.本文用满足FCC频谱规划的脉冲--高斯脉冲的五阶导数推导了TH-BPSK方式下的跳时超宽带扩频系统的误码与多址性能,并研究了多径对其性能的影响,比较了TH-BPSK 与TH-PPM系统性能,分析结果表明TH-BPSK的性能(未考虑多径)明显优于TH-PPM,但是TH-PPM抗多径性能优于TH-BPSK.     

Asset-Management of Transformers Based on Condition Monitoring and Standard Diagnosis [Feature Article]

In this paper, a methodology is developed to use data acquisition derived from condition monitoring and standard diagnosis for rehabilitation purposes of transformers. The interpretation and understanding of the test data are obtained from international test standards to determine the current condition of transformers. In an attempt to ascertain monitoring priorities, the effective test methods are selected for transformer diagnosis. In particular, the standardization of diagnostic and analytical techniques are being improved that will enable field personnel to more easily use the test results and will reduce the need for interpretation by experts. In addition, the advanced method has the potential to reduce the time greatly and increase the accuracy of diagnostics. The important aim of the standardization is to develop the multiple diagnostic models that combine results from the different tests and give an overall assessment of reliability and maintenance for transformers.     

择形催化合成2,6-DMN的研究进展

介绍了2,6-二甲基萘(2,6-DMN)的制备方法,详细论述了萘、甲基萘在分子筛催化剂上择形催化合成2,6-DMN的研究进展,提出了择形催化合成2,6-DMN的研究方向。     

有粘结预应力在252m地下室顶板中的应用

在总长度 2 5 2m的超长不设缝地下室顶板中 ,采用了预应力、设置后浇带等综合抗裂技术 ,并对有粘结预应力平板的设计理论、施工工艺、锚固体系及超长结构预应力损失控制和抗裂控制作了深入研究。     

IF钢冷轧及再结晶初期微观组织的TEM研究

采用透射电子显微镜对不同压下量和再结晶初期的IF钢样品进行了研究．结果表明：无论是在较小形变量下还是在较大形变量下，形变不均匀性是普遍存在的；冷变形程度不同，织构组分不同，TEM形貌也不同；在再结晶的最初期，冷轧的形变组织演变为近乎等轴的亚晶，优先形成{111}〈uvw〉取向的晶核，晶核逐渐吞并周围的形变基体而长大，最终形成再结晶γ-纤维织构．     

操纵员心理评价方法研究

文章对核电厂操纵员心理定性化评价以及定量化评价方法进行分析和探讨。对轮廓图匹配法和模糊综合评价法的适用范围、应用效果进行了比较分析。该研究的结果可为操纵员评价提供有益参考。     

道路边坡生态防护初探

随着我国经济实力的增强和人们环保意识的提高，国家已经十分重视道路建设中的生态建设和环境保护。通过对已建道路边坡防护方式进行分析，找出了存在的问题，提出改善和提高道路边坡防护的方法，并通过工程实例进一步得到验证。     

一种高精度的CMOS带隙基准电压源

设计了一种采用0.25 μm CMOS工艺的高精度带隙基准电压源.该电路结构新颖,性能优异,其温度系数可达3×10-6/℃,电源抑制比可达75 dB.还增加了提高电源抑制比电路、启动电路和省功耗电路,以保证电路工作点正常、性能优良,并使电路的静态功耗较小.