基于Petri网的交互式双机容错模型

传统的服务器容错模型大多采用复制和冗余机制，给系统造成大量垃圾．本文分析了数据库的体系结构，给出一个具有三层交互式的Petri网容错模型．实现了客错机制和容错策略的分离，体现了系统的动态特性．     

激光加工机器人通信协议及其实现

介绍激光加工机器人系统的通信协议以及实现方法，其中涉及到实时多任务系统VRTXsa、串口通信控件编制。该通信协议和通信系统在应用中取得了满意的效果。     

Effects of Magnetic Heat Treatment on Magnetostiction Properties of Tb0.3 Dy0.7 Fe1.95 Alloy

The effects of magnetic heat treatment on magnetostriction properties of Tb0.3Dy0.7Fe1.95 alloy were investigated.The directionally solidified alloy was heated to various temperatures near Curie temperature TC in vacuum, kept for a certain time under the application of magnetic field and then cooled to room temperature.The magnetostriction coefficient was measured by a resistance strain gage.The crystal structure was analyzed by X-ray diffraction (XRD).The experimental results show that the magnetostriction coefficient obviously increases and the grains orientations along the axis changed somewhat as the field of 1 T vertical to axis of the rod-shaped specimen is applied for 5 min at the heating temperature slightly lower than TC.     

基于监测资料与反分析技术的施工期围岩稳定分析及计算机实现

针对地下工程施工的特点 ,运用监测资料以及反分析技术 ,建立符合地下工程实际特点的、实用的、可操作性强的分析流程及计算机实现过程 ,阐述围岩变形监测与反分析技术相结合的方法及应用     

WEB应用系统性能测试的实现

对WEB应用系统进行合理的性能测试是保证系统质量的一个重要过程。以某远程教学系统为案例,借助于测试工具Load Runner,从负载反应层面对系统性能进行验证,并对测试结果进行分析,以保证系统的合理优化。     

Shut-cut nitrification characteristics of aerobic granule in a sequencing batch airlift reactor at low temperature

To investigate the shut-cut nitrification characteristics of aerobic granule,an aerobic granular sequencing batch airlift reactor(AG-SBAR) was carried out with mixed carbon sources of sodium acetate and glucose at 10±1 ℃.Results indicated that ammonia oxidizing bacteria was accumulated inside the aerobic granules and the reactor performed stably with shut-cut nitrification for a long term at low temperature.During the stable operation period,the effluent ammonia nitrogen concentration was maintained at 13.6 mg/L without nitrate and nitrite when the COD/N ratio was 20:1.However,the effluent concentration of ammonia nitrogen was below 0.5 mg/L with effluent nitrosation ratio of 96.7% on average when the COD/N ratio was reduced to 15:1 and 10:1.And the effluent phosphorus concentration was less than 0.4 mg/L during the stable period with the sludge retention time of 30 d.The phosphorus removal efficiency was not strongly influenced by the adjustment of COD/N ratio in this experiment.The removal efficiencies for COD,NH4+-N and PO43--P were 91.3%-94.6%,97.9%-99.7% and 97.1%-99.5%,respectively.     

基于模糊理论的变压器状态评估

变压器评估系统根据基础技术数据、运行数据、检修数据等各类数据,分析变压器的工作状态,利用模糊理论的思想,提出一种采用模糊综合评判的方法,对变压器状态进行评估,最终得到状态评估报告,为设备的状态检修决策提供依据。     

Gd2O3-UO2芯块晶粒尺寸的影响因素研究

用光学显微镜和图象分析仪研究了影响Gd2O3-UO2芯块晶粒尺寸的因素。对烧结气氛、混料方式、芯块在烧结炉中的位置、以及在UO2芯块中添加U3O8、草酸铵和助烧剂（Al、Ti、V的氧化物）等给Gd2O3-UO2芯块晶粒尺寸带来的影响进行了研究。结果表明,球磨工艺、添加助烧剂和微氧化气氛烧结等都有利于芯块的晶粒生长,晶粒大小分布均匀;添加U3O8和草酸铵对芯块的晶粒生长无明显的影响。     

新型LF精炼渣深脱硫研究进展

综述了BaO,Li2O,B2O3等替代剂替代精炼渣中CaO,CaF2对脱硫性能的影响,展望了脱硫精炼渣替代剂的前景,为今后对深脱硫精炼渣的研究和应用提供依据和参考。研究结果表明:1)BaO,Li2O不仅有较好的脱硫能力,二者还能降低渣系熔点,增强精炼渣的流动性,并且使用Li2O比BaO效果要好;2)BaO加入量在5%～25%范围内较合适,Li2O在渣中的添加量小于15%较合适;3)B2O3在渣中的加入量在10%以内时可以替代CaF2,减少CaF2对炉衬的侵蚀和对环境的污染(以上为质量分数)。     

Study on the Grain Refinement of an Al-Zn-Mg-Cu Alloy Prepared by LFEC Process

Low frequency electromagnetic casting(LFEC)process has been developed for years with the application of an induction coil outside the conventional direct chill(DC)casting mould.It has been demonstrated that the LFEC process has a significant grain refining effect on aluminium alloys.However,how it refines the microstructure is still not clearly understood.In the present work,the temperature measurement were carried out to study the temperature field during casting and to understand the mechanism of the grain refining effect of the LFEC process.The results showed that in contrast to the conventional DC casting process,during the LFEC process,the liquid melt flowing from the launder into the mould is cooled with very high cooling rate directly to 3-6℃below the liquidus and the temperature field of the entire melt in the mould and the hot top is quite uniform,which results in enhanced heterogeneous nucleation and improved survival rate of the nuclei.This is believed to be the main reason why the LFEC process can significantly refine the grain size of aluminium alloys.