Bio-/Environment-Friendly Cationic Gemini Surfactant as Novel Corrosion Inhibitor for Mild Steel in 1 M HCl Solution

Bio-/environment-friendly cationic gemini surfactant, ethane-1,2-diyl bis(N,N-dimethyl-N-hexadecylammoniumacetoxy)dichloride, referred to as 16-E2-16, was synthesized and characterized. Corrosion inhibition effects of 16-E2-16 on mild steel (MS) surface in 1 M HCl solution at 30, 40, 50 and 60 °C were evaluated using gravimetric analysis, potentiodynamic polarisation and electrochemical impedance spectroscopy measurements. The nature of the protective inhibitor film formed on the MS surface was analysed by SEM, EDAX and FT-IR, while TGA was used to assure the thermal behaviour and stability of the film at high temperature. The formation of [inhibitor-Fe²⁺] on the surface of MS was confirmed by UV–visible spectroscopy. The inhibition efficiency of the studied inhibitor increased with increasing concentration and solution temperature. The compound behaved as a mixed type inhibitor and acted by blocking the electrode surface by means of adsorption obeying the Langmuir adsorption isotherm. Surface active properties and corrosion inhibition effects of 16-E2-16 in the presence of inorganic (NaI) and organic (NaSal) salts were also investigated and are discussed. Density functional theory calculations have been carried out to correlate the efficiency of the compound with its intrinsic molecular parameters.     

Effects of Spray Drying Temperature and Additives on the Stability of Serine Alkaline Protease Powders

In this study, after production by recombinant Bacillus subtilis (BGSC-1A751), carrying pHV1431::subc gene in the complex medium and separation of solids from the fermentation broth, serine alkaline protease (SAP) was dried in order to investigate the stabilization during spray drying and subsequent storage. The effect of air inlet temperature of the spray dryer between T = 70 and 130°C and the effect of protective additives, glucose and maltodextrin, at 0–2% (w/v) on SAP activity during spray drying and storage stability of obtained SAP powders at 4°C for a long period (6 months) were evaluated. Increasing drying air inlet temperature generally resulted in an increase in activity loss; moreover, higher absorbance peaks observed at wave number 1061 cm^?1 of the IR spectrums when drying temperature is increased indicates the structural change in the SAP molecule. In most cases presence of additives provided higher activities both after drying and during storage period compared to no additive case. Drying the enzyme with 1% (w/v) glucose at T = 110°C resulted in the highest enzyme activity after drying and storage processes.     

Recovery of Zinc by LIX 984N‐C from Electroplating Rinse Bath Solution

The development of a complete solvent extraction process at the laboratory scale for recovering zinc from the zinc electroplating first rinse bath solution (alkali solution) containing ～1.9 g/L zinc (ZEFRBS) by a solvent extraction route using LIX 984N‐C, which is a new SX reagent developed by Cognis, and dissolved in commercial kerosene was investigated. By using LIX 984N‐C, an electrolyte from ZEFRBS with ～12 g/L zinc content, which was addable to the alkali zinc electroplating bath, was generated by 10 vol.% LIX 984N‐C in commercial kerosene at the O/A ratio of 1/4 and equilibrium pH value of 8.00 ± 0.05 with a two‐stage countercurrent extraction, and stripping of the loaded organic by a strip solution with 150 g/L sulfuric acid and with the O/A ratio of 1.5 at a two‐stage countercurrent stripping process. A new complete flow sheet of 10 vol.% LIX 984N‐C process for the recovery of zinc from ZEFRBS has been demonstrated.     

Structural and Molecular Orbital Studies of Si-Phenyl Silaanthracenes

The Si-phenyl derivatives of 1-, 2-, 9- silaanthracenes have been subjected to theoretical analysis with density functional theory (B3LYP/6-31G(d)) to obtain their molecular orbital properties. 2-silaanthracene has been found to be thermodynamically the most stable derivative among the trio. Moreover, the effects of the position of the Si substitution and phenyl attachment on the aromaticity of the parent anthracene have been investigated by NICS calculations at ring centers. The structures have been found to be less aromatic with respect to their unsubstituted counterparts.     

Bayesian Sequential Estimation of a Drift of Fractional Brownian Motion

Abstract

We solve explicitly a Bayesian sequential estimation problem for the drift parameter μ of a fractional Brownian motion under the assumptions that a prior density of μ is Gaussian and that a penalty function is quadratic or Dirac-delta. The optimal stopping time for this case is deterministic.     

Comparison of microleakage of a multi-mode adhesive system with contemporary adhesives in class II resin restorations

Aim: The aim was to compare the microleakage of resin composite bonded with different adhesive systems in class-II cavities at enamel or dentine margins. Material and methods: 60 extracted human molar teeth received slot cavity preparations on mesial and distal surfaces (mesial cervical margin was prepared in enamel and distal in dentine). They were randomly divided into five groups (n?=?12) according to the adhesive system: Group-A: Silorane Bond (S), Group-B: Adper Single Bond 2 (SB), Group-C: Clearfil SE Bond (CSE), Group-D: Single Bond Universal (USel) (selective etch-and-rinse), Group-E: Single Bond Universal (USE) (all-in-one). The preparations were restored using the same resin composite (Filtek Ultimate) except Group A which was restored by Silorane composite. The teeth were thermocycled, immersed in dye, sectioned, and dye penetration was evaluated quantitatively using image analysis. The data were analyzed using the two-way analysis of variance and Bonferroni test. Results: In all groups, there was no statistically significant difference between enamel margins at occlusal and gingival sites (p?>?0.05). The statistical difference between Group-A (S) and Group-B (SB) was significant at all margins. Group-B (SB) presented the greatest microleakage amounts at all margins and the highest scores were obtained in the dentine. Likewise, SB demonstrated statistically significant differences between dentine and enamel margins (occlusal and gingival)(p?<?0.05). Conclusion: All adhesive systems showed similar microleakage values between enamel margins in occlusal and gingival regions. However, when the gingival margin is located in the dentine, etch&rinse adhesive systems may not be a choice in terms of microleakage prevention.     

Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A variety of surface active compounds were synthesized by the quaternization of some straight chain amide derivatives with triethylamine or pyridine. Their structure FT-IR and ¹H-NMR spectra were recorded. In addition their physical properties and corrosion prevention efficiencies were investigated. All compounds were tested with steel coupons in acidic media by the gravimetric method. As acidic media 1.5 M HCl and 1.5 M H₂SO₄ were used and the corrosion inhibition tests fulfilled at room temperature for 24 h. Almost all prepared cationic surfactants showed efficient inhibition around their critical micelle concentrations. The effects of HCl concentration on corrosion inhibition of some synthesized compounds were also investigated. The corrosion tests were supported by contact angle measurements.     

Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique

Ceramic preforms with randomly distributed particles as reticulated porous structure which are generally used for metal infiltration as reinforcement, membranes, catalyst supports etc. Preforms are characterized by open porosity making possible their infiltration by liquid metal alloys. In this work, quartz powders using carbon black as a reducing agent were used for alpha Si₃N₄ powders synthesis through a carbothermal reduction and nitridation (CRN) process. The CRN process was carried out under nitrogen flow at 1,450 °C for 4 h. At high temperatures, carbon as reducing agent reacts with the oxygen of SiO₂, and the resulting metallic silicon compounds with nitrogen gas to obtain silicon nitride powder. The reacted powders were used to obtain reticulated ceramic by replica method. The powders containing various bentonite ratios were mixed in water to prepare slurry. The slurry was infiltrated into a polyurethane sponge. A high porous ceramic foam (preform) structure was achieved after burn out of the sponge. All ceramic preforms were sintered to increase stiffness (in the temperature range 900–1,350 °C). The sintered ceramic foams were subjected to compressive tests. The scanning electron microscopy was used to examine the reticulated ceramic foam structure, and X-ray diffraction analysis was performed to determine phases.     

Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.