Model of intense pulsed ion beam and simulation study of energy deposited on target

Gaussian type models have been established according to the real detected voltage of magnetically insulated ion diode and intense pulsed ion beam density near the focus of the diode. The energy deposition of Al target irradiated by intense pulsed ion beam has been simulated by Monte Carlo method based on these models. The results of energy depositions of the irradiation of single energy ions and the Gaussian distribution IPIB have been obtained. Especially cases of ion beam irradiating Al target at different angles on one dimension and two dimensions are discussed. The evolution processes of the energy deposition of ions in target have been simulated during a pulse. In addition, incident angles of H⁺ ions and C⁺ ions ranging from 20 to 40° have been researched. We obtained the conclusions that C⁺ ions of the beam affect the physical properties of near surface region, but H⁺ ions affect the deeper layer. The energy of intense pulsed ion beam mainly deposits on target surface, so melting and evaporation begin both from target surface.     

使用人工神经网络对强力旋压有限元模拟进行参数预选

在筒形件强力旋压领域内，介绍了使用人工神经网络的手段，在MARC有限元模拟的前处理中实现参数预选的方法。作为与有限元模拟相结合的旋压智能化设计的一项关键技术，能够达到减少有限元模拟的误差和工作量的目的。     

含Ti微合金钢动态再结晶行为及模型研究

采用Gleeble 3800热力模拟实验机,研究了一种Ti微合金钢在850～1 150℃、0.1和1.0 s-1条件下的变形奥氏体的动态再结晶行为及再结晶后奥氏体晶粒尺寸的演化规律。结果表明:形变激活能与变形条件相关,随着应变速率的增加而增加;Avrami指数m同样与变形条件有关;对实验数据进行回归分析后建立的Ti微合金钢动态再结晶的特征应变、特征应力、动力学以及稳定状态晶粒尺寸的数学模型精度较高。     

Modeling of stress ratio effect on Al alloy SAE AMS 7475-T7351: Influence of loading direction

The main goal of this work was to evaluate the effectiveness of Walker’s equation in collapsing the fatigue crack propagation data of a SAE AMS 7475-T7351 aluminum alloy loaded either longitudinally (L-T) or transversely (T-L) to the rolling direction. T-L orientation testpieces presented lower ductility and fracture toughness values than L-T orientation. As a consequence, during the fatigue crack propagation tests, T-L testpieces exhibited a stronger influence of monotonic modes of fracture, resulting in higher Paris exponent values,m. Walker’s model was able to collapse fatigue crack propagation data of L-T test pieces at different applied stress ratios,R. However, for the T-L orientation, due to theR ratio dependency onm andC, simply averaging ofm values for the calculations of Walker’s exponent proved to be inefficient. A simple analytical procedure was proposed by the authors to modify Walker’s model to take into account such effect. For T-L test pieces, when Walker’s model is modified by considering both Paris’s exponent as well the coefficient as a function of theR ratio, the fatigue crack growth data collapses within a narrow band, thus allowing predictions to be made satisfactorily. The collapsed band is even narrower if the empirical relationm=a+blogC is used instead of simple polynomial equations due to a better correlation coefficient.     

小径管焊缝射线照相标准的实践与问题研讨

通过分析小径管焊缝射线检验中存在问题，对X射线检测标准作了进一步探讨。     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

硅丙涂料的现状及发展趋势

介绍了硅丙涂料在国内外市场的生产及需求现状,指出了硅丙涂料产品的发展方向。     

非均相固定化酶促反应中“抗激发互交作用”的解析分析与定量计算

通过理论推导证明：在外扩散与化学抑制共存的非均相固定化酶促反应中，总有效系数η为外扩散有效系数ηｄｉｆ和化学抑制有效系数ηｃｈ的乘积，并且分别小于相应的ηｄｉｆ和ηｃｈ；从数学上解释了外扩散抑制和一般性化学抑制间所存在的“抗激发互交作用”。利用所得公式计算表明：底物浓度对外扩散与竞争性、非竞争性和反竞争性等不同化学抑制共存的非均相固定化酶促反应有明显不同的影响；扩散抑制均显著地影响非均相固定化酶促反应，使得反应体系的总有效系数随抑制作用的增加而明显减小，从而对这类反应有了更进一步的认识     

天然沸石处理含铅、镉废水的试验研究

天然沸石经改性后对铅、镉有较好的吸附能力，当铅的浓度为2mg／L，沸石用量30g，动态变换3小时，吸附效率达90％以上，吸附容量达5mg／g；当镉的浓度为l00mg／L，沸石用量l0g，动态交换24小时，吸附效率可达99．8％以上。在450℃时处理的沸石吸附效果最佳，改性后的沸石对铜的吸附具有较好的选择性。     

GC/MS法建立烟用香精指纹图谱研究

采用超声辅助液液萃取法(ULLE)对8个不同批次的烟用HMT香精成分进行提取,用GC/MS对其进行定性定量分析,建立了该香精的GC/MS指纹图谱的研究方法,目的在于为烟用香精质量控制提供一种方便、快捷、可靠的分析手段。结果表明:ULLE方法具有操作简便、快速、节能、萃取效率高、重现性好等特点,适合于烟用香精成分的提取。8个批次的HMT香精的指纹图谱稳定性好,相似度高,具有很强的特征性和唯一性。通过该香精指纹图谱的建立,对日后进厂的HMT香精进行质量控制提供了依据。