GOR-C降烯烃催化剂的工业应用

大庆炼化公司林源生产指挥部催化裂化装置原料油为典型石蜡基原油的常压渣油，生产的催化汽油中的烯烃含量较高，为此试用长岭炼化公司催化剂厂生产的降烯烃催化剂GOR-C。结果表明，降烯烃效果明显，产品分布无明显变化，能满足现有生产要求，经济效益显著。     

合成二氧化硅对硅橡胶性能的影响

介绍了合成二氧化硅及硅橡胶的结构性质，探究了二氧化硅的结构性质对硅橡胶补强性能的影响，指出了二氧化硅颗粒的大小、形态、聚结状态、表面性质和与高分子硅氧烷之间的相互作用是影响二氧化硅对硅橡胶补强性能的最主要的因素，并用实验对硅橡胶的硬度、拉伸强度、300％定伸应力、扯断伸长率、撕裂强度、压缩永久变形等物理性能进行测定，结果表明：BET比表面积180～200m^2／g，孔隙度（吸油量）为3.0～3.2mL／g，平均粒径为8～10岬的沉淀法白炭黑对硅橡胶具有很好的补强效果。     

紫外光固化胶粘剂的粘接性能研究

本研究采用三种丙烯酸酯单体(M01、M02、M03)和一种紫外光引发剂(I01)配制了紫外光固化胶粘剂,探讨了不同原料配比对产品拉伸剪切强度的影响。实验结果表明:当原料配比为M01:2.07mmol、M02:7.02mmol、M03:13.7mmol、I01:0.585mmol时产品的拉伸剪切强度较好。     

聚酯微观结构模型

不同的加工工艺赋予聚酯纤维特殊的微观结构，为正确认识其微观结构以利于工艺的选择及性能的优化，综述了聚酯纤维微观结构的研究，并作了较详细的分析。     

Coordinating efficiency and equity in disaster relief logistics via information updates

This paper addresses a multi-supplier, multi-affected area, multi-relief, and multi-vehicle relief allocation problem in disaster relief logistics. A multi-objective optimisation model based on disaster scenario information updates is proposed in an attempt to coordinate efficiency and equity through timely and appropriate decisions regarding issues such as vehicle routing and relief allocation. An optimal stopping rule is also proposed to determine the optimum period of delay before responding to disaster, because decision making requires accurate disaster information. The main contribution of this paper is solving relief allocation problem in a novel way by correlating operational research with statistical decision making and Bayesian sequential analysis. Finally, a case is presented based on the post-disaster rescue in Eastern China after supertyphoon Saomai to test the applicability and show the potential advantages of the proposed model.     

单晶金刚石膜与多晶金刚石膜的制备工艺及性能

本文主要介绍了用微波等离子体化学气相沉积法(以下简称MP CVD法)以甲醇-氢气混合气和丙酮-氢气混合气为源气体,分别以单晶硅的(111)面和人造金刚石的(100)面为衬底材料,制备出了面积为20mm×20mm厚为10μm的多晶金刚石膜和面积为1.0mm×1.0mm厚为5μm的单晶金刚石膜。通过试验发现,源气体配比和衬底温度对薄膜质量起决定性作用。另外,衬底在反应腔中的位置对薄膜的生成也有很大影响。单晶金刚石膜制备过程中衬底金刚石的晶体取向与金刚石薄膜的生长及质量有密切的关系。在金刚石的(100),(110)和(111)面上分别获得了单晶金刚石膜和金刚石多晶粒子。选用扫描电镜、显微激光拉曼、反射电子衍射对多晶金刚石膜及单晶金刚石膜的性能进行了测试。     

Commutative encryption and watermarking based on orthogonal decomposition

Commutative Encryption and Watermarking (CEW) is a technology combined with encryption and watermarking, which is used for providing comprehensive security protection for multimedia information. This paper presents a novel CEW scheme based on orthogonal decomposition. Different from current CEW, the proposed CEW not only achieves the integration of encryption and watermarking in the final data but also has no specific restrictions in selecting encryption and watermarking algorithms. Therefore, the proposed CEW possesses higher security and applicability. Experimental results demonstrate that the proposed CEW can keep the performances of selected encryption and watermarking algorithm and show more robustness than other current CEW schemes.     

An FAR-SW based approach for webpage information extraction

Automatically identifying and extracting the target information of a webpage, especially main text, is a critical task in many web content analysis applications, such as information retrieval and automated screen reading. However, compared with typical plain texts, the structures of information on the web are extremely complex and have no single fixed template or layout. On the other hand, the amount of presentation elements on web pages, such as dynamic navigational menus, flashing logos, and a multitude of ad blocks, has increased rapidly in the past decade. In this paper, we have proposed a statistics-based approach that integrates the concept of fuzzy association rules (FAR) with that of sliding window (SW) to efficiently extract the main text content from web pages. Our approach involves two separate stages. In Stage 1, the original HTML source is pre-processed and features are extracted for every line of text; then, a supervised learning is performed to detect fuzzy association rules in training web pages. In Stage 2, necessary HTML source preprocessing and text line feature extraction are conducted the same way as that of Stage 1, after which each text line is tested whether it belongs to the main text by extracted fuzzy association rules. Next, a sliding window is applied to segment the web page into several potential topical blocks. Finally, a simple selection algorithm is utilized to select those important blocks that are then united as the detected topical region (main texts). Experimental results on real world data show that the efficiency and accuracy of our approach are better than existing Document Object Model (DOM)-based and Vision-based approaches.     

铜陵一冶环保治理工程的设计

介绍冶炼烟气制本系统环保治理工程的工艺设计及生产运行情况。污水处理系统采用中和曝气加铁盐除砷工艺，引进了戈尔膜过滤器。尾气处理系统，采用石灰中和法，引进动波洗涤技术和关键设备。环保治理工程投产后，废气均达标排放。     

Formation control of mobile robots with obstacle avoidance based on GOACM using onboard sensors

This paper deals with the problem of formation control for nonholonomic mobile robots under a cluttered environment. When the obstacles are not detected, the follower robot calculates its waypoint to track, based on the leader robot’s state. The proposed geometric obstacle avoidance control method (GOACM) guarantees that the robot avoids the static and dynamic obstacles using onboard sensors. Due to the difficulty for the robot to simultaneously get overall safe boundary of an obstacle in practice, a safe line, which is perpendicular to the obstacle surface, is used instead of the safe boundary. Since GOACM is executed to find a safe waypoint for the robot, GOACM can effectively cooperate with the formation control method. Moreover, the adaptive controllers guarantee that the trajectory and velocity tracking errors converge to zero with the consideration of the parametric uncertainties of both kinematic and dynamic models. Simulation and experiment results present that the robots effectively form and maintain formation avoiding the obstacles.