PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

Shape‐memory polyurethane/multiwalled carbon nanotube fibers

Shape‐memory polyurethane/multiwalled carbon nanotube (SMP–MWNT) composites with various multiwalled carbon nanotube (MWNT) contents were synthesized, and the corresponding SMP–MWNT fibers were prepared by melt spinning. The influence of the MWNT content on the spinnability, fracture morphology, thermal and mechanical properties, and shape‐memory behavior of the shape‐memory polymer was studied. The spinning ability of SMP–MWNTs decreased significantly with increasing MWNT content. When the MWNT content reached 8.0 wt %, the fibers could not be produced because of the poor rheological properties of the composites. The melt‐blending, extrusion, and melt‐spinning processes for the shape‐memory fiber (SMF), particularly at low MWNT contents, caused the nanotubes to distribute homogeneously and preferentially align along the drawing direction of the SMF. The crystallization in the SMF was promoted at low MWNT contents because it acted as a nucleation agent. At high MWNT contents, however, the crystallization was hindered because the movement of the polyurethane chains was restricted. The homogeneously distributed and aligned MWNTs preserved the SMF with high tenacity and initial modulus. The recovery ratio and recovery force were also improved because the MWNTs helped to store the internal elastic energy during stretching and fixing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Possible Energy Network with polygeneration system and CCS for China

On basis of adopting polygeneration systems for power and alternative fuels,capturing CO2 with near zero energy penalties,and storing CO2 on sites,a new kind of Energy Network can integrate energy utilization,CO2 capture,transportation and storage synthetically.Techno-economic analysis of this solution focusing on Inner Mongolia and the Yangtze River Delta districts had been carried with comparison to the chain method for energy utilization and CO2 sequestration.This solution can save 21.5% of energy,and re...     

浅析江西农民增收的影响因素

江西农民收入在新世纪以来有了可喜的变化,但必须看到,江西农民人均纯收入与江西生产总值的增长,以及与城镇居民可支配收入的增加相比,与东部发达省份的农民收入相比,甚至与中部地区大部分省份相比,其增加还是缓幔的。江西省委、省政府历来十分重视“三农”问题。新时期江西农民收入增长比较快,但幅度不大,具体情况是工资性纯收入和外出务工收入增加较快,一产纯收入仍占主要份额,地区发展不平衡。影响江西农民收入的因素有：二、三产的比重太少,农民非企业组织收入少,农民家庭收入增长慢。     

课外科技活动与大学生创新能力的培养

高等学校是培养创新人才的基地和摇篮,肩负着重要的历史使命。必须全方位更新观念,把培养大学生的创新能力作为教育改革的核心。而开展大学生课外科技活动,是激发学生创新意识、提高学生综合素质的重要手段,有利于营造浓厚的科技氛围,促使学生理论联系实际,培养实践能力,激发创新能力。     

无线射频识别技术（RFID）及其在物联网中的应用

随着物联网知识的普及,以及其技术的广泛推广应用,物联网被越来越多的人所关注。本文介绍了物联网及其关键技术RFID,并结合RFID在物联网的实际应用,并对其未来的发展作出了展望。     

钛纳米改性聚合物防腐涂料的研究

为保护大庆油田三元复合液中油管,以钛纳米改性聚合物为主要原料,研制了钛纳米改性聚合物重防腐涂料.采用透射电子显微镜(TEM)研究了钛纳米改性聚合物平均粒径.采用正交试验法,确定最佳原料配比.采用扫描电子显微镜(SEM)研究了漆膜腐蚀.采用金相显微镜研究了钛纳米改性聚合物在漆膜中的分布.探讨了油管的腐蚀机理和钛纳米涂料的防护机理.实验结果表明:钛纳米含量为6%时,涂料具有最佳的防腐蚀效果,能很好的保护大庆油田三元复合液中的油管,并具有优异的抗化学药品介质的腐蚀性能.     

太阳能溴化锂吸收式制冷系统吸收特性的研究

太阳能溴化锂吸收式制冷系统的吸收器采用传热、传质分离装置,利用预冷器预先冷却和喷淋吸收的方法完成对传热、传质的分离。通过建立吸收器的计算模型,分析冷冻水出口温度、冷却水进口温度、热水温度、喷淋温度、喷淋密度等因素对传热、传质的影响。利用传热、传质分离方法,使系统的吸收特性得到强化,从而使系统获得较高的性能系数。     

Cation interdiffusion between thick film of YBa2Cu3O7-δ and ceramic substrate

Thick films of superconducting oxides, YBa₂Cu₃O_7-, were successfully made by conventional screen-printing technology on Al₂O₃, MgO, and ZrO₂ substrates. Interdiffusion between the superconductive film and substrate was investigated using analytical electron microscopy. The results indicate that MgO and ZrO₂ are superior to Al₂O₃ for substrate materials.