关于搞好士官学员思想教育的几点思考

本文着重从士官学员的思想特点及其发展变化规律入手,研究如何针对这些特点和规律搞好思想教育工作。     

GPS在航天器交会对接中的应用研究

ＧＰＳ动态定位技术应用于交会对接中与目前采用的测量手段相比具有较大优势。文章首先对交会对接各阶段测量精度要求与ＧＰＳ能达到的精度做出比较,在此基础上给邮了ＧＰＳ技术应用于航天器交会对接过程的基本方案,重点讨论各阶段的数学模型,最后论述了其优越性。     

土地利用效益评估与在南部的实践

本文简要讨论了土地利用效益评价的内涵与原则,提出了两类评估方法,即专家估计效益综合指数法与土地直接产出法。在南部的实践说明两种方法的结果高度正相关。     

渗碳钢变温渗碳过程分析

以２０ＣｒＭｎＴｉ钢为例,建立了连续冷却渗碳模型;对变温渗碳质量进行了分析计算;对渗碳后的组织情况进行预测,从而对变温渗碳的可行性进行了理论论证．     

Highly efficient, widely tunable, 10-Hz parametric amplifier pumped by frequency-doubled femtosecond Ti:sapphire laser pulses

We report a 10-Hz, highly efficient, widely tunable (from the visible to the IR), broadband femtosecond optical parametric generator and optical parametric amplifier (OPA) in BBO, LBO, and CBO crystals pumped by the frequency-doubled output of a regeneratively amplified Ti:sapphire laser at 400 nm. The output of the system is continuously tunable from 440 nm to 2.5 mum with a maximum overall efficiency of ~25% at 670 nm and an optical conversion efficiency of more than 36% in the OPA stage. The effects of the seed beam energy, the type of the crystal and the crystal length, and the pumping energy of the output of the OPA, such as the optical efficiency, the bandwidth, the pulse duration, and the group velocity mismatch between the signal and the idler and between the seeder and the pump, are investigated. The results provide useful information for optimization of the design of the system.     

Retroreflective grating generation and analysis for surface measurement

An efficient system for retroreflective grating generation andanalysis has been constructed to measure the derivative and the contourof specular surfaces. In this system, a new optical configurationhas been provided to generate and capture a grating image with aretroreflective screen. Tests show that the system can detectindents and outdents with a maximum depth of less than 10mum. The method can be developed for automated industrialinspection and machine vision.     

Rotation-invariant and controllable space-variant optical correlation

We propose a method for designing a correlator for achieving rotation-invariant and controllable space-variant optical correlation. The design concept is based on a combination of fractional correlation and circular-harmonic decomposition of the reference object. The suggested method is described and analyzed in detail. Numerical simulations show that this new correlator might provide potential applications in practice.     

Fabrication and characterization of optical-fiber nanoprobes for scanning near-field optical microscopy

The current scanning near-field optical microscopy has been developed with optical-fiber probes obtained by use of either laser-heated pulling or chemical etching. For high-resolution near-field imaging, the detected signal is rapidly attenuated as the aperture size of the probe decreases. It is thus important to fabricate probes optimized for both spot size and optical transmission. We present a two-step fabrication that allowed us to achieve an improved performance of the optical-fiber probes. Initially, a CO(2) laser-heated pulling was used to produce a parabolic transitional taper ending with a top thin filament. Then, a rapid chemical etching with 50% buffered hydrofluoric acid was used to remove the thin filament and to result in a final conical tip on the top of the parabolic transitional taper. Systematically, we obtained optical-fiber nanoprobes with the apex size as small as 10 nm and the final cone angle varying from 15 degrees to 80 degrees . It was found that the optical transmission efficiency increases rapidly as the taper angle increases from 15 degrees to 50 degrees , but a further increase in the taper angle gives rise to important broadening of the spot size. Finally, the fabricated nanoprobes were used in photon-scanning tunneling microscopy, which allowed observation of etched double lines and grating structures with periods as small as 200 nm.     

智能化锅炉水冷壁清焦检测机具

电厂锅炉水冷壁清焦检测工作一直是个难题,目前国内外尚无更好的解决办法。多功能金属表面清焦检测机具为电厂锅炉水冷壁的清焦检测工作提供了智能化手段,使水冷壁的检测清焦自动化,较好地解决了这一难题。另外,它亦可广泛应用于船体检测、储油气罐及给排水、油管道的检测、疏通堵塞等领域。     

Measurement of the peritectic phase composition in the Sn-Cd system through directional solidification techniques

Short Communication

Measurement of the peritectic phase composition in the Sn-Cd system through directional solidification techniques