横向光泵获得S_2紫外激光

用ＸｅＣｌ准分于激光器（３０８．１ｎｍ）横向泵浦Ｓ２激光器，又成功地实现了Ｓ２Ｂ－Ｘ态近ＵＶ波段的激光振荡。在波长３３０．９～３９０．０ｎｍ范围内观测到６条近ＵＶ激光输出。测量了有关的激光参数。     

Biological Effects of Flammulina Velutipes Richin RE on Chinese Kunming Mice

ＢｉｏｌｏｇｉｃａｌＥｆｆｅｃｔｓｏｆＦｌａｍｍｕｌｉｎａＶｅｌｕｔｉｐｅｓＲｉｃｈｉｎＲＥｏｎＣｈｉｎｅｓｅＫｕｎｍｉｎｇＭｉｃｅＬｉａｎｇＤｉｎｇｂａｎｇ（梁定邦）；ＣｕｉＤｅｆａｎｇ（崔德芳）；ＺｈａｎｇＪｉｎｔｏｎｇ（张金桐）（Ｄｅｐａｒｔｍ...     

非线性动态系统“黑箱”建模方法的研究

本文研究弱非线性动态系统“黑箱”建模的理论和方法，并简要给出根据此方法建模的结果。     

地基基础与上部结构共同作用和结构次生应力问题

本文考虑到上部结构与地基基础共同作用的事实,着重分析上部结构参与共同作用导致的内力重分布——次生应力问题。通过多个理论与实验的结果,对不同地基和基础条件下的次生应力进行了定量分析,探讨了造成次生应力的各种因素以及对建筑结构带来的危害。     

Correlation between vascular and cellular responses to atrial natriuretic peptide and to sodium nitroprusside

Atrial natriuretic peptide (ANP) and sodium nitroprusside (SNP) increase cGMP in vascular smooth muscle cells and act as vasodilators in some, but not all, blood vessels. In this present study, we attempted to correlate the ability of these two agents to dilate blood vessels with the ability to increase cGMP in cultured vascular smooth muscle cells. In the isolated guinea pig heart, SNP dose-dependently increased coronary flow while ANP was ineffective. In smooth muscle cells cultured from the coronary system, SNP increased intracellular cGMP in a dose-dependent manner while ANP had no effect on cGMP in these cells. In isolated guinea-pig thoracic aorta, precontracted with K+, both ANP and SNP produced relaxation and ANP was the more potent. In smooth muscle cells cultured from the aorta, ANP and SNP increased cGMP and the potency relationship was similar to the intact vessel. These results support the view that phenotypic properties of vascular smooth muscle cells can account for differences in the response of blood vessels to vasodilators.     

Sanger DNA-sequencing reactions performed in a solid-phase nanoreactor directly coupled to capillary gel electrophoresis

A miniaturized, solid-phase nanoreactor was developed to prepare Sanger DNA-sequencing ladders which was directly interfaced to a capillary gel electrophoresis system. A biotinylated fragment of the rat brain actin gene (1 kbp) was amplified by PCR and attached to the interior wall of an (aminoalkyl)silane-derivatized fused-silica capillary tube via a biotin/streptavidin/biotin linkage. Coverage of the capillary wall with the biotinylated DNA averaged 77 +/- 10%. Stability of the anchored template under pressure (33 nL/s) and electroosmotic flows (11.3 nL/s) were favorable, requiring rinsing for > 150 h to reduce the surface coverage by only 50%. In addition, the immobilized template was stable toward temperatures required for preparing sequencing ladders, even under cycling conditions. Standard Sanger dideoxynucleotide termination performed in a large-volume (approximately 8 microL) solid-phase reactor using the thermally stable polymerase enzymes Taq and Vent and the polymerases T7 and Bst with off-line slab gel electrophoresis and autoradiographic detection indicated that acceptable fragment generation was achieved only in the case of the thermally stable polymerases. Banding was not apparent for T7 and Bst since all reagents were inserted into the column in a single plug at the beginning of the reaction. A small volume reactor (volume approximately 62 nL) was then used to perform DNA polymerase reactions and was coupled directly to a capillary gel column for separation. The capillary reactor was placed inside a thermocycler to control the temperature during chain extension and was directly connected to the gel column via zero dead volume fused-silica connectors. The complementary DNA fragments generated (C-track only) in the reactor were denatured using heat and directly injected onto the gel-filled capillary for size separation with detection accomplished using near-IR laser-induced fluorescence. Extension and single-base separation resolution of the C-track, which was directly injected onto the gel column, was estimated to be > 450 bases from the primer annealing site with plate numbers ranging from 1 x 10(6) to 2 x 10(6)/m.     

新型合金代铬刷镀层的组织及强化机理的研究

采用Ｘ射线衍射仪，透射电镜和扫描隧道显微镜等手段对新型代铬镀层（Ｎｉ－Ｆｅ－Ｗ－Ｐ－Ｓ）相结构及组织进行了研究，并初步探讨了镀层的强化机理。研究表明，Ｎｉ－Ｆｅ－Ｗ－Ｐ－Ｓ合金镀层的组织是由含Ｆｅ、Ｗ、Ｐ、Ｓ的镍基固溶体和在其上弥散分布的金属间化合物Ｎｉ_３Ｆｅ所组成，镍基固溶体处于非晶和微晶的混合状态，合金镀层的镀态硬度为ＨＶ７００～７５０，在３００℃退火时。硬度达到最大值ＨＶ９００～９５０，其强化机理主要是微晶的晶界强化和Ｎｉ_３Ｆｅ的弥散强化。     

掺镉纳米SnO2的热稳定性,电导及气敏性能

本文研究了ＣｄＯ掺杂对纳米ＳｎＯ２粉料的热稳定性，电导及气敏特性的影响。结果表明，以非晶状态均匀分散在ＳｎＯ２颗粒表面的ＣｄＯ能阻止ＳｎＯ２之间的相互扩散，提高了纳米ＳｎＯ２的热稳定性；固溶于ＳｎＯ２昌粒中的ＣｄＯ量（Ｃｄ／Ｓｎ〈０．０５）很小，但对元件的电导影响显著；纳米级的晶粒尺寸（〈６ｎｍ）及ＣｄＯ的掺杂大大改善了ＳｎＯ２的气敏特性。     

汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

溅渣护炉技术在转炉上的应用

从１９９６年开始实施溅渣护炉试验研究，一年来的工业性试验与实验室研究表明：所用的溅渣护炉工艺参数基本可行，溅渣护炉条件下复吹比达５０％，炉衬砖消耗下降０．７ｋｇ／ｔ，喷补料消耗下降１．２２ｋｇ／ｔ。试验证明开发新型调渣剂是进一步提高溅渣护炉效果的重要措施。