丙烯酸酯单体对聚氯乙烯密封胶粘剂的改性作用

丙烯酸酯有较大的反应活性，能与聚氯乙烯发生接技共聚反应。本文中，我们着重研究不同结构丙烯酸酯单体对聚乙烯基密封胶粘剂的改性作用。以PVC为100份，分别加入甲基丙烯酸一缩二乙二醇双脂（DEGDMA），甲基丙烯酸乙二醇双酯（EGDMA）和丙烯酸一缩二乙二醇双酯（DEGDA）各为10份、20份、30份的试验结果看出，随着丙烯酸酯单体添加量的增加，PVC片基的硬度增大，拉伸强度提高，而伸长率降低。不同的单体其影响也不同。就硬度和拉伸强度有EGDMA＞DEGDA＞DEGDMA的规律伸长率的降低则为DEGDMA＞DEGDA＞EGDMA。就丙烯酸…     

Lightpath (wavelength) routing in large WDM networks

We address the problem of efficient circuit switching in wide area optical networks. The solution provided is based on finding optimal routes for lightpaths and the new concept of semilightpaths. A lightpath is a fully optical transmission path, while a semilightpath is a transmission path constructed by chaining together several lightpaths, using wavelength conversion at their junctions. A fast and practical algorithm is presented to optimally route lightpaths and semilightpaths taking into account both the cost of using the wavelengths on links and the cost of wavelength conversion. We prove that the running time of the algorithm is the best possible in the wide class of algorithms allowing linear algebraic operations on weights. This class encompasses all known related practical methods. Additionally, our method works for any physical realization of wavelength conversion, independently whether it is done via optoelectronic conversion or in a fully optical way     

变结构变参数设计方法及其在机械CAD中的应用

提出了一种新颖的机械结构设计思想－变结构变参数设计方法，并结合实例，阐述了变结构变参数设计的概念、原则、实施措施和意义。由此对Ｉ－ｄｅａｓ软件包进行了二次开发，编制了发动机曲轴专用ＣＡＤ软件程序，并用某型号发动机曲轴进行了验证。     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

FP──VLSI自动综合系统

ＦＰ—ＶＬＳＩ自动综合系统是一个集成化的ＶＬＳＩ自动设计工具，它能完成从并行算法到脉动算法到脉动结构再到逻辑结构最后到ＣＭＯＳ版图的自动综合过程．ＦＰ—ＶＬＳＩ系统以脉动阵列为ＶＬＳＩ的体系结构，采用具有良好代数性质的ＦＰ／Ｂ语言作为各层次的描述语言，通过程序变换进行综合和优化．该系统支持形式化的ＶＬＳＩ设计方法，能保证设计结果的正确性．     

军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。     

Proteins and cells on PEG immobilized silicon surfaces

Functional adhesion of blood and marrow leukemic cells from 14 acute myeloid leukemia patients presenting with hyperleukocytosis was evaluated by performing cytoadhesion assays on purified (extracellular matrix proteins) and non-purified supports (MRC5 fibroblastic cell line). Results, in 30-min chromium release assay, show a mean +/- S.D. adhesion to fibronectin, collagen, and laminin respectively of 30 +/- 17%, 20 +/- 13%, 25 +/- 17% for blood leukemic cells and 18 +/- 11%, 11 +/- 10%, 11 +/- 8% for marrow leukemic cells. These differences between blood and marrow cells were statistically significant (respectively P = 0.005, P = 0.01 and P = 0.002), while no difference was noted regarding adhesion to non-purified supports. The higher adhesion of blood blast cells to purified supports was observed regardless of CD34 expression. No significant difference was observed in the expression of cell surface VLA-molecules (CD29, CD49b, CD49d, CD49e, CD49f) between blood and marrow blast cells. The addition of GM-CSF or G-CSF induced increased adhesion of marrow blasts and decreased adhesion of blood blasts leading to a loss of the difference between blood and marrow cells. In a 60-min chromium release assay, marrow blasts adhered even more than blood leukemic cells to fibronectin. In contrast, marrow blasts from 'aleukemic' acute myeloid leukemia patients did not show any modification regarding their adhesion to extracellular matrix proteins when co-cultured with growth factors.     

磷酸盐激光玻璃中铂颗粒密度与氧化还原平衡关系的研究

用吸收光谱法研究了Ｒ２Ｏ—ＢａＯ—Ｐ２Ｏ５系统磷酸盐激光玻璃中铂颗粒密度与铭的氧化还原平衡的关系。结果表明，玻璃中铂颗粒密度随平衡向右移动而减小；玻璃中平衡随熔炼气氛中氧分压增大、熔炼温度升高而向右移动，当足够大时，铂颗粒不能形成。     

用小尺寸R－CT试样研究核压力容器钢断裂韧性及与Charpy试样的比较

提出了一种用双边带深侧槽的小尺寸圆形紧凑拉伸试样评定核压力容器（ＲＰＶ）钢断裂韧性的单试作试验方法，给出了用该方法测定的两个厂家生产的核压力容器用Ａ５０８ＣＬ３钢的断裂韧性参数，还与Ｃｈａｒｐｙ试样的试验结果及大尺寸标准试样的试验结果进行了比较。研究结果表明：用双边带深侧槽的小尺寸Ｒ－ＣＴ试样测得的断裂韧性值比相同恻槽深度预制疲劳裂纹Ｃｈａｒｐｙ试样的测试值更接近有效断裂韧性值，所以，用于核压力容器断裂韧性的监测是可行的。     

A unified model for dislocation nucleation, dislocation emission and dislocation free zone

In this paper, a unified model for dislocation nucleation, emission and dislocation free zone is proposed based on the Peierls framework. Three regions are identified ahead of the crack tip. The emitted dislocations, located away from the crack tip in the form of an inverse pileup, define the plastic zone. Between that zone and the cohesive zone immediately ahead of the crack tip, there is a dislocation free zone. With the stress field and the dislocation density field in the cohesive zone and plastic zone being, respectively, expressed in the first and second Chebyshev polynomial series, and the opening and slip displacements in trigonometric series, a set of nonlinear algebraic equations can be obtained and solved with the Newton-Raphson Method. The results of calculations for pure shearing and combined tension and shear loading after dislocation emission are given in detail. An approximate treatment of the dynamic effects of the dislocation emission is also developed in this paper, and the calculation results are in good agreement with those of molecular dynamics simulations.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids, 4–7 July 1994 in Xi'an, China.