Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

Size and pressure effects on solid transition temperatures of ZrO2

Transition temperatures between tetragonal and monoclinic polymorphs of ZrO₂ nanoparticles, thin films and nanostructured materials are calculated by considering energetic contributions of surface (interface) energy and surface stress on total Gibbs free energy. The transition temperatures drop as the size of the nanocrystals decreases, which is consistent with available results.     

耐候钢连铸工艺的改进

分析耐候钢连铸出现的问题,认为凝固时应力过大和磷铜元素偏析造成晶界脆化是出现铸坯纵裂的主要原因;结晶器中喂稀土丝恶化保护渣性能,影响结晶器与坯壳间的润滑与传热,并使热流不均匀是连铸漏钢的主因。采用钙处理代喂稀土丝工艺,以及减缓连铸一、二次冷却强度,改进保护渣后,连铸缺陷获得极大改善。     

炼油厂酮苯装置空冷器腐蚀原因分析

炼厂酮苯装置空冷器因空冷管束腐蚀穿孔被迫停工检修，经取样分析和现场调查，得出结论：溶解氧含量偏高，设备本身存在震动，无盐水质量不稳定及空冷管束选材不当是造成空冷器管束腐蚀穿孔的主要原因，提出有效大的防腐措施。     

保温条件下过共晶Al-Si合金半固态浆料的组织演变

研究了保温时间和保温温度对电磁搅拌ZL117合金半固态浆料稳定性的影响.试验结果表明：半固态浆料中初生Si的颗粒直径随着保温时间的延长而逐渐增大,但在前15 min内增长速度比较缓慢,15 min后增长较快;随着保温温度的升高而缓慢增大;初生Si的形状系数随着保温时间的延长而变得越来越大,但也在前15 min内变化较为缓慢,15 min后变大速度突然加快;初生Si的形状系数在620 ℃下保温时最小,在610～620 ℃之间随着保温温度的升高而缓慢变小;在620～650 ℃之间随着保温温度的升高而逐渐增加.     

TENSILE FRACURE IN AN Al-Li ALLOY 8090

ＴＥＮＳＩＬＥＦＲＡＣＵＲＥＩＮＡＮＡｌ－ＬｉＡＬＬＯＹ８０９０￥Ｊｉａｎｇ，Ｄａｍｉｎｇ；Ｗａｎｇ，Ｙｉｎｏｎｇ；Ｈｏｎｇ，Ｂａｎｄｅ；Ｌｅｉ，Ｔｉｎｇｑｕａｎ（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇｙ，Ｈａｒｂｉｎ１５００８０）Ｓｕ...     

国外小电流空气等离子弧切割技术的发展

本文就小电流空气等离子弧切割工艺的特性、切割质量、切割设备、存在问题和应用情况作了综合介绍。当工作气体含氧量为20％时,切割速度急剧增加,大大优于气割。     

Rh(Ⅲ)—钍试剂—高碘酸钾新体系催化光度法测定痕量铑

在pH3.9醋酸盐缓冲溶液中及加热条件下,Rh(Ⅲ)对高碘酸钾氧化钍试剂这一褪色反应有强烈的催化作用,可藉自来水冷却中止反应,研究了催化光度测定痕量铑的影响因素,建立了一个检出限和测定范围分别为0.06ng/ml和0.12～4.5ng/ml铑的催化光度新方法。     

Dual–primal proximal point algorithms for extended convex programming

This paper presents a class of dual–primal proximal point algorithms (PPAs) for extended convex programming with linear constraints. By choosing appropriate proximal regularization matrices, the application of the general PPA to the equivalent variational inequality of the extended convex programming with linear constraints can result in easy proximal subproblems. In theory, the sequence generated by the general PPA may fail to converge since the proximal regularization matrix is asymmetric sometimes. So we construct descent directions derived from the solution obtained by the general PPA. Different step lengths and descent directions are chosen with the negligible additional computational load. The global convergence of the new algorithms is proved easily based on the fact that the sequences generated are Fejér monotone. Furthermore, we provide a simple proof for the O(1/t) convergence rate of these algorithms.