多孔硅发光机制的分析

从量子力学的基本理论出发讨论了量子限制效应，推导出多孔硅有效禁带宽度增量并用量子限制效应和表面态及其物质在发光中作用的理论解释了ＰＳ光致发光的实验现象。     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

寄生电容不敏感的开关电容乘法器的设计与分析

本文论述了寄生电容不敏感型开关电容四象限模拟乘法器的设计，并提出了一种新型的电路结构，分析了它的性能，以及元器件的非理想特性对其性能的影响和采取的补偿方法。     

微波辐射电镜生物样品制备方法研究

本文报道一种快速微波辐射电镜样品制备方法──水浴法，以及这个方法在动植物样品超薄切片制备中的应用。实验结果表明，水浴法使得样品可以接受相对较长时间的微波辐射而不致造成任何损伤，浸泡液和样品的温度控制简单而且准确，样品处理的结果内外均匀一致，超微结构保存优秀，完全可与常规制样法和Ｌｏｇｉｎ法的结果相媲美，而且在某些方面水浴法要优于常规法和Ｌｏｇｉｎ法。     

氟碳铈矿／直氟碳钙铈矿混层结构中新规则混层矿物的超微结构研究

用电子衍射和晶格像技术研究了钙稀土氟碳酸盐矿物中的氟碳铈矿（Ｂ）／直氟碳钙铈矿（Ｓ）混层结构，发现并确定了Ｂ＿４Ｓ＿４、Ｂ＿８Ｓ＿６、Ｂ＿１Ｓ＿６、Ｂ＿７Ｓ＿４和Ｂ＿２Ｓ＿１５种新规则混层矿物的对称性、晶胞参数及理论晶体化学式。根据所获得的高分辨晶格像真实而直观地揭示出该类Ｂ＿ｍＳ＿ｎ（ｍ＞ｎ）型新规则混层矿物的长周期有序堆垛结构特征及变化规律。     

自适应相位制中波同步广播及现场试验

在本试验中，采用智能同步广播激励器和ＣＣＴＶ传输的１ＭＨｚ标频，实现了中波同步广播同频保护率趋于０ｄＢ．并提出了自适应相位跟踪同步的概念。     

Effect of grain boundary phase on the thermal conductivity of aluminium nitride ceramics

AIN with high thermal conductivity was fabricated by pressureless sintering with Y₂O₃ as the sintering aid. The thermal conductivity was observed to increase with sintering time (up to 8 h) at 1810 °C. The distribution of the sintering aid was identified as one of the major factors influencing the thermal conductivity in AIN. Non-uniform distribution of the grain boundary phase was found to be associated with a significant amount of porosity, resulting in the enhancement of phonon scattering and thereby lowering the thermal conductivity.     

Effect of micro-alloying titanium on the dynamic recrystallization behaviour of steels

The effect of titanium addition on the dynamic recrystallization behaviour of steels has been investigated. Constant strain rate tension tests were conducted in vacuum in the temperature range from 925 to 1225°C. Dynamic recrystallization-time-temperature (RTT) curves were developed from the flow curves at ε? = 1 × 10^?2s^?1. The results of the different steels with and without Ti indicate that the onsets of dynamic recrystallization in all the steels are earlier at higher temperatures than at lower temperatures and the addition of titanium may shift the RTT curve of the C–Mn–Si steel towards the right, i.e. retard dynamic recrystallization. The retarding effect of Ti becomes more intensive at temperatures below about 1075°C where a transition of the RTT relationship occurs. Microstructural examinations show that titanium dissolved in austenite can retard the dynamic recrystallization and the precipitation of TiC produces a more intensive retarding effect.     

Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressure

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubber-modified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed at a relatively low pressure (between 30 and 38 M Pa). With cavitation suppressed, the rubber particles are unable to induce massive shearyielding in the epoxy matrix, and the fracture toughness of the rubber-modified epoxy is no higher than that of the unmodified epoxy in the pressure range studied. Unmodified epoxy shows a brittle-to-ductile transition in fracture toughness test. The reason for this transition is the postponement of the cracking process by applied pressure.Work performed while on a sabbatical leave at the University of Michigan.     

任意型一维FIR数字滤波器设计新方法

本文介绍了一种设计任意型（宽带、窄带、低阶、高阶、低通、高通、带通、带阻）一维FIR数字滤波器新方法．给出设计不同类型滤波器的统一方法。各种类型滤波器脉冲响应的设计公式简单、计算方便。该方法消除了Gibbs现象．不仅克服了优化设计中收敛速度、设计精度及初值选取等问题，而且减少设计高阶滤波器的时间。最后，本文给出了各种类型滤波器设计的仿真结果。