一种可调节电流的电流型PWM直流转换器

介绍一种用于驱动发光二极管(LED)的可调节电流的电流型PWM直流转换器.该直流转换器由于接有一个外接电阻,可以通过调节外接电阻的大小来调节输出电流.输出电流调节范围在5～40mA之间.主要分析了电路的输出电流调节功能,和这种输出电流可变的电流型PWM直流转换器的电流和电压反馈环的反馈实现原理.并简要介绍了这种带电流调节功能的PWM直流转换器的工作原理,最后给出了电路在输出不同电流时使用HSPICE软件对反馈参考电压,PWM锁存器输出波形的仿真结果.     

Sexualities, technologies, and the teaching of writing: A critical overview

In this introduction to a special issue of Computers and Composition, the authors critically review current literature on computer-assisted writing pedagogies that grapple with issues of sexuality. Although this body of work is small, it points to provocative ways to develop our students’ critical and rhetorical sensibilities about the constructions of sexuality in our culture. Further, such work innovatively addresses the place of networked communication technologies in the interrogation of such constructions. The authors conclude with both an introduction of the work in this special issue that addresses the intersection of sexuality studies and computer-assisted writing studies and with a call for additional work in this field.     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

A quantitative analysis of the effectiveness of laparascopy and endoscopy virtual reality simulators

The increasing use of virtual reality (VR) simulators in surgical training makes it imperative that definitive studies be performed to assess their training effectiveness. Indeed in this paper we report the meta-analysis of the efficacy of virtual reality simulators in (1) the transference of skills from the simulator training environment to the operating room and (2) their ability to discriminate between the experience levels of its users. The task completion time and the error score were the two study outcomes collated and analyzed in this meta-analysis. Sixteen studies were identified from a computer-based literature search (1996-2004). The meta-analysis of the random-effects model (because of the heterogeneity of the data) revealed that training on virtual reality simulators did lessen the time taken to complete a given surgical task as also clearly differentiate between the experienced and the novice trainees. Meta-analytic studies such as the one reported here would be very helpful in the planning and setting up of surgical training programs and for the establishment of reference ‘learning curves’ for a specific simulator and surgical task. If any such programs already exist they can then indicate the improvements to be made in the simulator used such as providing for more variety in their case scenarios based on the state and/or rate of learning of the trainee.     

Determination of optimal feedback terminal controllers for general boundary conditions using generating functions

Given a nonlinear system and a performance index to be minimized, we present a general approach to expressing the finite time optimal feedback control law applicable to different types of boundary conditions. Starting from the necessary conditions for optimality represented by a Hamiltonian system, we solve the Hamilton-Jacobi equation for a generating function for a specific canonical transformation. This enables us to obtain the optimal feedback control for fundamentally different sets of boundary conditions only using a series of algebraic manipulations and partial differentiations. Furthermore, the proposed approach reveals an insight that the optimal cost functions for a given dynamical system can be decomposed into a single generating function that is only a function of the dynamics plus a term representing the boundary conditions. This result is formalized as a theorem. The whole procedure provides an advantage over methods rooted in dynamic programming, which require one to solve the Hamilton-Jacobi-Bellman equation repetitively for each type of boundary condition. The cost of this favorable versatility is doubling the dimension of the partial differential equation to be solved.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008