Cryptanalysis of a dynamic ID‐based remote user authentication with key agreement scheme

A dynamic user authentication scheme allows a user and a remote server to authenticate each other without leaking the user's identity. In 2011, Wen and Li proposed an improved dynamic ID‐based remote user authentication with key agreement scheme for mobile and home networks. They claimed that their scheme was more secure than the scheme of Wang et al. However, we demonstrate that their scheme is vulnerable to the privileged insider, off‐line password guessing, impersonation, and server spoofing attacks. At the same time, it does not provide any user anonymity and forward secrecy property. Thus, it is not feasible for real‐life implementation.Copyright © 2012 John Wiley & Sons, Ltd.     

Performance Analysis of Directional CSMA/CA for IEEE 802.15.3c under Saturation Environments

In this paper, the directional carrier sense multiple access/collision avoidance (CSMA/CA) protocol in the immediate acknowledgement mode for IEEE 802.15.3c is analyzed under saturation environments. For the analysis, a sensing region and an exclusive region with a directional antenna are computed probabilistically and a Markov chain model in which the features of IEEE 802.15.3c and the effects of using directional antennas are incorporated is analyzed. An algorithm to find the maximal number of concurrently transmittable frames is proposed. The system throughput and the average transmission delay are obtained in closed forms. The numerical results show the impact of directional antennas on the CSMA/CA media access control (MAC) protocol. For instance, the throughput with a small beamwidth of antenna is more than ten times larger than that for an omnidirectional antenna. The overall analysis is verified by a simulation. The obtained results will be helpful in developing an MAC protocol for enhancing the performance of mmWave wireless personal area networks.     

Wireless Energy Transfer System with Multiple Coils via Coupled Magnetic Resonances

A general equivalent circuit model is developed for a wireless energy transfer system composed of multiple coils via coupled magnetic resonances. To verify the developed model, four types of wireless energy transfer systems are fabricated, measured, and compared with simulation results. To model a system composed of n‐coils, node equations are built in the form of an n‐by‐n matrix, and the equivalent circuit model is established using an electric design automation tool. Using the model, we can simulate systems with multiple coils, power sources, and loads. Moreover, coupling constants are extracted as a function of the distance between two coils, and we can predict the characteristics of a system having coils at an arbitrary location. We fabricate four types of systems with relay coils, two operating frequencies, two power sources, and the function of characteristic impedance conversion. We measure the characteristics of all systems and compare them with the simulation results. The flexibility of the developed model enables us to design and optimize a complicated system consisting of many coils.     

16‐QAM‐Based Highly Spectral‐Efficient E‐band Communication System with Bit Rate up to 10 Gbps

This paper presents a novel 16‐quadrature‐amplitude‐modulation (QAM) E‐band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71‐76 GHz/81‐86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16‐QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up‐/down‐conversion mixer are implemented using a 0.1 µm gallium arsenide pseudomorphic high‐electron‐mobility transistor (GaAs pHEMT) process. A single‐IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed‐Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^?5 at a signal‐to‐noise ratio of about 21.5 dB.     

Small‐Size and High‐Isolation MIMO Antenna for WLAN

A small‐sized (15 mm×30 mm) planar monopole MIMO antenna that offers high‐isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander‐line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T‐shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S₂₁) is about –30 dB, and the envelope correlation coefficient is less than 0.1.     

A comparative study for quantum transport calculations of nanosized field-effect transistors

This article presents a comparative study on quantum mechanical frameworks between the widely used local Quasi-Fermi Level (QFL) model and a recently developed top of the barrier splitting (TBS) model. Both models are based on an atomistic quantum mechanical solver using the linear combination of bulk band method (LCBB). The QFL model uses the local Quasi-Fermi Level to represent the local equilibrium and calculate the occupied charge density as well as the current flow along the channel. The TBS model extracts scattering state information from the stationary solution of the system, then calculates the charge density as well as the ballistic and tunneling current. Using these two models, the 10 nm and 22 nm double-gate ultra-thin-body structures are simulated. Comparisons in occupied charge densities, self-consistent potentials as well as the I–V characteristics between these two models are presented. It is found that the QFL model significantly overestimate the subthreshold charge density inside the channel, as well as the current, while it works fine in the ON state of the device. It is also found that the results from both QFL and TBS models tend to coincide with each other as the drain bias approaching zero.     

Shared hardware,high throughput implementation of 2D 4 × 4 and 8 × 8 integer transform for H.264/AVC high-profile coders

Two-dimensional discrete cosine transforms are used in the core transformations in all profiles of the H.264/Advanced video coding (AVC) standard. In this paper, implementing the resource sharing of high throughput 4 × 4 and 8 × 8 forward and inverse integer transforms for high definition H.264 is presented. It is shown that the 4 × 4 forward/inverse transform can be obtained from 8 × 8 forward/inverse transform using selective data input and data arrangement at intermediate stages. Fast 8 × 8 forward and inverse transform is implemented using matrix decomposition and matrix operation such as Kronecker product and direct sum. The proposed implementation does not require any transpose memory and has a dual clocked pipeline structure. Compared with existing designs, the gate count is reduced by 27.7% in the proposed design. The maximum operating frequency of the proposed system is approx. 1.3 GHz, while the throughput is 7 G and 18.7 G pixels/s for 4 × 4 and 8 × 8 forward integer transforms, respectively. The proposed design can be used for real time H.264/AVC high definition processing owing to its high throughput and low hardware cost.     

High-efficiency red electroluminescence from europium complex containing a neutral dipyrido(3,2-a:2′,3′-c)phenazine ligand in PLEDs

In order to obtain high-efficiency monochromatic red emission in polymer light-emitting devices, a tris(dibenzoylmethanato)(dipyrido(3,2-a:2′,3′-c)phenazine) europium [Eu(DBM)₃(DPPZ)] doped single-emissive-layer devices were fabricated using a blend of poly(9,9-dioctyl-fluorence) and 2-tert-butyl-phenyl-5-biphenyl-1,3,4-oxadiazole as a host matrix by solution process. Significantly improved electro-luminescent properties with sharp red emission at 611.5 nm were displayed in the Eu(DBM)₃(DPPZ)-doped devices at dopant concentrations from 1 to 8 wt.%. The highest luminance up to 1783 cd/m² at 2 wt.% dopant concentration, as well as the maximum external quantum efficiency of 2.5% and current efficiency of 3.8 cd/A were obtained at 1 wt.% dopant concentration.     

Bandwidth‐satisfied routing in multi‐rate MANETs by cross‐layer approach

Previous quality‐of‐service (QoS) routing protocols in mobile ad hoc networks (MANETs) determined bandwidth‐satisfied routes for QoS applications. Since the multi‐rate enhancements have been implemented in MANETs, QoS routing protocols should be adapted to exploit them fully. However, existing works suffer from one bandwidth‐violation problem, named the hidden route problem (HRP), which may arise when a new flow is permitted and only the bandwidth consumption of the hosts in the neighborhood of the route is computed. Without considering the bandwidth consumption to ongoing flows is the reason the problem is introduced. This work proposes a routing protocol that can avoid HRP for data rate selection and bandwidth‐satisfied route determination with an efficient cross‐layer design based on the integration of PHY and MAC layers into the network layer. To use bandwidth efficiently, we aim to select the combination of data rates and a route with minimal bandwidth consumption to the network, instead of the strategy adopted in the most previous works by selecting the combination with the shortest total transmission time. Using bandwidth efficiently can increase the number of flows supported by a network. Copyright 2010 John Wiley & Sons, Ltd.     

分布式移动通信系统中基于多普勒测速与卡尔曼滤波的动态定位算法

该文提出了一种分布式移动通信系统中的动态定位算法,算法中首先通过远端天线单元(RAU)测量移动台(MS)的多普勒频偏,将其变换为MS到各RAU方向的径向速度,建立状态方程和观测方程,然后采用扩展卡尔曼滤波法估计移动台的当前位置,并通过逐次迭代即可实现MS运动轨迹的动态估计。因为卡尔曼滤波法的引入,该算法有效地降低了当前估计误差对后续时刻估计值的影响,从而可获得较高的定位精度。