Si3N4结合SiC窑具的研制及应用

本文根据试验确定了工艺路线,介绍了氯化烧成机理、原材料的选择及生产工艺对制品的影响,生产出的制品技术指标先进,性能优良。作为更新换代的新型窑具材料具有显著的经济效益和社会效益,有着广泛的使用价值。     

Viscoelastic properties of phenolphthalein poly(ether ketone)

Stress relaxation and dynamic mechanical behavior of phenolphthalein poly(ether ketone) (PEK-C) have been investigated. Using Ferry's reduction method, the master curve was obtained. From the experimental results, we found that the WLF equation is not appropriate in the lower-temperature range (T < T_g). The relaxation spectrum was calculated according to the first approximation method proposed by Schwarzl and Staverman. In addition to the α-transition region, a second transition zone is revealed at low temperature. This transition is probably due to a restricted motion of its main chain. © 1995 John Wiley & Sons, Inc.     

Investigation of free volume,interfacial, and toughening behavior for cyanate ester/bentonite nanocomposites by positron annihilation

Effects of filler on microstructure and toughening behavior of cyanate ester (CE)/bentonite (BT) nanocomposites with different content of BT have been studied by positron annihilation lifetime spectroscopy, X‐ray diffraction, transmission electron microscopy, dynamic mechanical analysis, etc. The interesting results found by PALS indicate that the size and concentration of the free volume holes and the apparent free volume fraction increased with increasing the content of BT, which indicates that adding nano‐layers to thermosetting materials can lead to the high crosslinking density structure “looser.” The experimental results reveal that the increases in size of free volume holes and apparent free volume fraction are related to the increasing conversion of cure reaction. On the other hand, the mechanism of toughening (by adding the nano‐clay to the thermosetting material) has been discussed by combining free volume and interfacial property. It is shown that, for the high crosslinking thermosetting material‐based nanocomposites, both the property of free volume and dispersion state of nano‐layers are the two key factors in determining toughening property. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1509–1515, 2006     

浅谈创业教育

按照《面向21世纪教育振兴行动计划》提出的目标，我国高等教育到2010年入学率接近15％，这个目标有可能提前实现；若按每年新出生人口为2000万计算，高等学校在校生规模将达到1500万，每年毕业生将在500万以上。面对这样沉重的就业压力，转变大学生毕业就是到社会上寻求工作岗位的就业观念，树立和加强创业教育，引导毕业生走自己的路，就显得有十分重要的特殊意义了。     

再生骨料的基本物理力学性能试验研究

再生骨料的物理力学性质是影响其运用范围、再生混凝土性能的本质因素。通过对公路废弃混凝土所制成的再生骨料和天然骨料同时进行物理力学性能试验研究,获得了骨料的表观密度、吸水率、压碎值、磨耗损失和针片状颗粒含量值。通过对再生骨料和天然骨料的试验结果进行对比分析发现,再生骨料除了针片状颗粒含量值会略优于天然骨料,其他四种物理力学性质均比天然骨料差,但两者的差异性不大。     

Formation of Polymeric Lewis Acid–Lewis Base Complexes with Well-defined Organoboron Polymers

The binding of Lewis bases to organoboron polymeric Lewis acids has been studied and the parameters that determine the complexation equilibrium have been investigated, which include (i) the strength of the individual Lewis acids and Lewis bases, (ii) concentration, and (iii) temperature. While the strongly Lewis acidic borane polymers poly(4-bis(pentafluorophenyl)borylstyrene) (PS-BPf) and poly(4-(di-2-thienylboryl)styrene) (PS-BTh) form isolable complexes with strong Lewis bases such as 4-t-butylpyridine (^tPy), a temperature dependent equilibrium is established with weaker bases such as THF. Similarly, the weakly Lewis acidic boronate polymer poly(4-diethoxyborylstyrene) (PS-BOEt) undergoes a temperature dependent equilibrium with the strong Lewis base 4-dimethylaminopyridine (DMAP), while poly(4-pinacolatoborylstyrene) (PS-BPin) does not significantly bind to pyridine bases. Decomplexation of PS-BTh· ^t Py is achieved by treatment with the stronger Lewis acid, B(C₆F₅)₃, thereby confirming the reversible nature of the polymeric Lewis acid–base adducts. This paper is dedicated to Professor Ian Manners in gratitude of his guidance throughout the years and recognition of his scientific accomplishments     

Laplacian group sparse modeling of human actions

Recently, many local-feature based methods have been proposed for feature learning to obtain a better high-level representation of human behavior. Most of the previous research ignores the structural information existing among local features in the same video sequences, while it is an important clue to distinguish ambiguous actions. To address this issue, we propose a Laplacian group sparse coding for human behavior representation. Unlike traditional methods such as sparse coding, our approach prefers to encode a group of relevant features simultaneously and meanwhile allow as less atoms as possible to participate in the approximation so that video-level sparsity is guaranteed. By incorporating Laplacian regularization the method is capable to ensure the similar approximation of closely related local features and the structural information is successfully preserved. Thus, a compact but discriminative human behavior representation is achieved. Besides, the objective of our model is solved with a closed-form solution, which reduces the computational cost significantly. Promising results on several popular benchmark datasets prove the efficiency and effectiveness of our approach.     

3D fingerprint reconstruction system using feature correspondences and prior estimated finger model

The paper studies a 3D fingerprint reconstruction technique based on multi-view touchless fingerprint images. This technique offers a solution for 3D fingerprint image generation and application when only multi-view 2D images are available. However, the difficulties and stresses of 3D fingerprint reconstruction are the establishment of feature correspondences based on 2D touchless fingerprint images and the estimation of the finger shape model. In this paper, several popular used features, such as scale invariant feature transformation (SIFT) feature, ridge feature and minutiae, are employed for correspondences establishment. To extract these fingerprint features accurately, an improved fingerprint enhancement method has been proposed by polishing orientation and ridge frequency maps according to the characteristics of 2D touchless fingerprint images. Therefore, correspondences can be established by adopting hierarchical fingerprint matching approaches. Through an analysis of 440 3D point cloud finger data (220 fingers, 2 pictures each) collected by a 3D scanning technique, i.e., the structured light illumination (SLI) method, the finger shape model is estimated. It is found that the binary quadratic function is more suitable for the finger shape model than the other mixed model tested in this paper. In our experiments, the reconstruction accuracy is illustrated by constructing a cylinder. Furthermore, results obtained from different fingerprint feature correspondences are analyzed and compared to show which features are more suitable for 3D fingerprint images generation.     

烟气脱硫技术在浮法玻璃线上的应用

简介了烟气脱硫技术在浮法玻璃线上的应用情况,以工程实例详细介绍该技术在某浮法玻璃线上的设计、实施、应用情况以及重点、难点问题的处理,为该技术在浮法玻璃线的应用提供借鉴和参考.