路灯监控终端开关灯控制转换原理

通过分析QHO电路原理，来阐述路灯监控终端进行开关控制转换的原理。     

应用型计算机专业学生培养模式探讨

本文探讨了应用型本科院校中计算机专业学生的培养模式,提出了培养高级计算机应用人才的根本途径和当前要解决的主要问题。     

基于数字电力系统的地区配电网络统一数据平台的研究

基于数字电力系统的思想 ,根据地区配电网络的特点 ,对数据进行分类 ,建立关系数据库的组织关系 ,提出了一种利用集合以及图论知识构建地区配电网络统一数据平台的方法 ,确保数据的共享性、一致性、唯一性 ,并符合数字电力系统的要求 ,具有普适性。同时结合实例 ,在该数据平台上 ,利用特征映射的方法 ,进行查询 ,效果令人满意。     

电容式两相流层析成象系统仿真研究

以油料在管道中输送为例进行电容层析成象仿真.利用有限元方法对电场建立数学模型,在SGI indigo 2 工作站上,使用AVS可视化软件和反投影算法,对3种典型流态模型反演及显示其流体成份分布的图象.     

关于Poisson分布高阶矩的几个定理的推论

本文对笔者曾撰文〔1〕推出的 Poisson分布高阶矩的几个定理作进一步的研究 ,给出几个推论。     

面向实际场景SLAM应用的光照适应性研究

为探究环境感知设备在SLAM算法应用过程中的光照适应性问题,在不同光照强度下分别进行激光雷达和深度相机SLAM算法的验证性评估实验.基于四轮差速机器人,搭载16线激光雷达和深度相机,结合LOAM(Lidar Odometry And Mapping)和RTAB-MAP(Real-Time Appearance-Based Mapping)算法,分别在明暗环境中分析验证设备光照适应性.实验结果表明:在明亮环境下,基于视觉SLAM和激光SLAM系统偏差的中误差分别为0.203和0.644 m;在黑暗环境中两者偏差的中误差分别为0.282和0.683 m;深度相机在明、暗环境中的定位建图效果均优于激光雷达,深度相机的光照适应性更强.     

数据拟合技术在变压器交流去磁试验分析中的应用

江苏500 kV泰兴变电所做2号主变交流去磁试验时出现了异常现象,即B相升压至80%额定电压以上时,电流表指针停在58格处不动。如何判断B相升压至90%及100%额定电压下,电流值是递增还是递减呢?运用数据拟合技术给出了所求之值,并对该方法的正确性结合实测值及理论分析给予验证,对解决同类型的试验问题具有一定的借鉴作用。     

High-speed ground moving target detection research using triangular modulation FMCW

The frequency modulated continuous wave (FMCW) radar has the characteristics of low probability of interception, good hidden property and the ability to counter anti-radiation missiles. This paper proposes a new method for high-speed ground moving target detection (GMTD) using triangular modulation FMCW. According to the characteristic of the opposite range shift induced by the upslope and downslope modulation FMCW, the upslope and downslope are imaged, respectively. After compensation of continuous motion of the platform and time difference between upslope and downslope signals for imaging, the moving target can be detected through displaced phase center antenna (DPCA) technology. When the moving target is detected, the moving target image is extracted, and correlation processing is used to obtain the range shift, which can be used to estimate the target radial velocity, and further to find the real position of the target. The effectiveness of this method is verified by the result of computer simulation. __________ Translated from Journal of Xidian University, 2008, 35(4): 586–591 [译自: 西安电子科技大学学报(自然科学版)]     

二维三氧化钨纳米结构的合成及其在光电探测器中的应用

三氧化钨（WO₃）是制造晶体管和光电探测器的理想材料,虽然在WO₃纳米结构的生长方面已经完成了一些工作,但是制造足够长的理想型纳米线仍然是一个挑战。在众多的合成方法中,作者选择了化学气相沉积（CVD）方法合成WO₃纳米线,并对其在光电传感器中的应用进行了研究。影响WO₃纳米线成品率的主要因素是前体材料温度、基片位置、载气流速和生长持续时间。在合适的生长条件下生长的纳米线长度最长约为100 μm。这些WO₃纳米线可用来制造高性能的光电探测器,WO₃光电探测器具有灵敏度高、响应速度快、模块微型化等优良的器件性能,表明二维WO₃纳米线在光电探测器的制造中具有很大的优势。      

Antireflection and band gap extension effects of ZnO nanocrystalline films grown on ITO-coated glasses by low temperature process

Zinc oxide (ZnO) nanocrystalline films coated on indium tin oxides (ITO, 90:10 wt%) glasses were prepared by low temperature process. The thin films were composed of uniform nanoparticles with average diameter around 8.4 nm. All samples exhibited excellent optical antireflective phenomena, and the maximum transmission reached 92.8% for the sample spin coated at 1500 rpm at 453 nm, improved by 21.5%. The antireflective results were explained by the coherence theory. And the antireflective effects were induced by the ITO and ZnO films. The calculated thicknesses of the ZnO films agreed well with the experimental results. The theoretical calculated band gap from the average diameter of ZnO nanoparticles was also well consistent with the experimental ones obtained from the optical transmission spectra. This result was promising for applications in organic solar cells.