埕岛油田卫星平台金属软管漏蚀问题的分析和对策

对埕岛油田卫星平台多年来一直存在的金属软管漏蚀问题进行分析,找出了导致金属软管漏蚀的主要原因,提出了相应的防治措施,主要有:在金属软管外部裹附橡胶垫,采用带弯头的减振金属软管,安装时金属软管的曲率半径要大于其最小弯曲半径等。通过采取一系列措施,解决了金属软管的漏蚀问题,达到了预期的效果。     

地域通信网中基于业务量的动态路由研究

本文从地域通信网的特点出发，分析了以前所使用的路由选择方法的优缺点，提出了网控支持的基于业务量的动态中币管理方法，并描述了该路由管理方法的分层结构和在地域网网络管理系统中的具体实现。     

塔河油田三叠系水平井地质导向技术研究

针对塔河油田三叠系碎屑岩油气藏油层薄、储集层非均质性较强、泥质和低渗致密夹层纵横向变化大的地质特点，在分析、研究不同区块多口水平井资料的基础上，探讨了水平井不同地质情况下斜井段及目的层砂顶的预测和判别技术，以实例阐述了井眼轨迹调整方法，首次形成了一套适合于该地区碎屑岩非均质薄层油气藏水平井录井地质导向技术，在塔河油田水平井钻探开发中取得了显著的成效。     

VSAP软件在碟式太阳能热发电系统设计中的应用

进行碟式太阳能热发电系统结构设计的关键是保证其可靠性和稳定性，为此，本文用VSAP有限元软件完成了系统结构的设计计算与分析，并在此基础上解决了聚光器配重、改善系统稳定性等问题。     

95W-Ni-Fe 合金工艺缺陷的 SAM 和 XPS 分析

藉助扫描俄歇探针、Ｘ射线光电子谱等分析了９５Ｗ－Ｎｉ－Ｆｅ合金碳污染和氧化的本质。发现，碳污染试样中碳的化学状态主要为石墨，少量为铁或镍的有机化合物，这些物质的界面富集使材料脆化。钨合金氧化后，氧大量富集于钨／粘结相界面，使沿着该界面的断裂更容易发生。     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

High concentration erbium doping of silicon-rich SiO2 thin films on silicon

In this work, high concentration erbium doping in silicon-rich SiO₂ thin films is demonstrated. Si plus Er dual-implanted thermal SiO₂ thin films on Si substrates have been fabricated by using a new method, the metal vapor vacuum arc ion source implantation with relatively low ion energy, strong flux and very high dose. X-Ray photoelectron spectroscopy measurement shows that very high Er concentrations on the surfaces of the samples, corresponding to 10 at.% or the doping level of 10²¹ atoms cm⁻³, are achieved. This value is much higher than that obtained by using other fabrication methods such as the high-energy ion implantation and molecular beam epitaxy. Reflective high-energy electron diffraction, atomic force microscopy and cross-section high-resolution transmission electron microscopy observations show that the excess Si atoms in SiO₂ matrix accumulate to form Si clusters and then crystallize gradually into Si nanoparticles embedded in SiO₂ films during dual-ion implantation followed by rapid thermal annealing. Er segregation and precipitates are not formed. Photoluminescence at the wavelength of 1.54 μm exhibits very weak temperature dependence due to the introduction of Si nanocrystals into the SiO₂ matrix. The 1.54-μm light emission signals from annealed samples decrease by less than a factor of 2 when the measuring temperature increases from 77 K to room temperature.     

固体碱催化戊醛缩合的研究

自制了固体碱催化剂用于催化戊醛缩合反应 ,考察了碱金属、载体、反应温度、反应压力、空速等条件对反应的影响。研究表明 ,以介孔分子筛为载体的催化剂活性尤其是低温活性明显高于以硅胶为载体的催化剂。自制的固体碱催化剂性能稳定 ,在 2 0MPa ,2 60℃ ,1 0h-1条件下连续运转 2 7d,仍能保持转化率高于 90 %、选择性约 80 %的良好效果。     

35CrMoCe稀土钢离子硫氮碳复合渗特性研究

采用金相显微镜，Ｘ射线衍射仪，透明电子显微镜，扫描电子显微镜等仪器分析对比３５ＣｒＭｏ钢和３５ＣｒＭｏＣｅ钢离子硫氮碳复合渗特性，探讨了稀土铈和加速离子硫氮碳复合渗的原因，研究结果表明，两种钢的复合渗层均由硫化物层，氮碳化物层的扩展层构成；稀土铈显著地提高了渗层深度，铈具有细化组织的作用，提供了更多可供氮碳原子扩散的通道。     

坐标测量机激光非接触式测头的研制

本文介绍适用子精密大型测试仪器──坐标测量机的激光非接触式测头的研制。该测头采用ＰＳＤ作为敏感元件并采用单片机技术完成对测量数据的处理。