Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

乙苯/乙烯烷基化反应中EA-8402分子筛催化剂的失活动力学研究

用内循环无梯度反应器,在593～633K范围内考察了在乙苯/乙烯进行定向烷基化反应合成对二乙苯时,EA-8402分子筛催化剂的失活行为,建立了相应的失活动力学模型: -da/dt=0.3271exp(-12.94/T)P_(EB)~(0.02)P_(E(?))~(0.383)·α这一模型可作为该反应的宏观动力学模型的补充。由失活级数d=1,按Levenspiel判据推断:其失活机理应该是不受内扩散阻力控制的平行-连串失活。     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

悬浮体两相流动和燃烧数值模拟现状及发展

本文阐述了含颗粒的液体或气体两相流动及其燃烧的数值模拟近十几年来的发展,指出处理颗粒相的基本论点,扼要说明了单流体模型,分散群模型及双连续介质(双流体)模型的基本内容,方法及其应用结果,评述了其现况.文中各部分都包含了作者本人的贡献及所提出的新论点,也包括了作者提出的新模型,文中最后指出了今后发展趋势.     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

马来酸酐接枝聚丙烯的进展

马来酸酐接枝聚丙烯是拓宽聚丙烯应用领域的重要手段之一,本文综述了马来酸酐接枝聚丙烯的接枝方法和原理,接枝物的性能以及接枝物在聚丙烯合金和共混物、复合材料、粘合剂和涂料领域的广泛应用。     

粉尘含碳球团还原方式及气氛对其还原挥发性能的影响

在1150℃和1250℃、0．1L／min和10L／min的气量下，对通人含不同CO2量的氮气影响粉尘含碳球团还原速度的实验研究表明：以滚动方式所造球团中，氧化物的还原完全以间接还原的方式进行，气氛中非还原气体流速（或流量）的增加对粉尘含碳球团氧化铁还原速度有显著的降低作用，但还原温度提高则对气量增加造成的氧化铁还原速度降低有显著的抵消作用．气氛对球团中锌的挥发速度影响很小，对铅的挥发速度几乎不产生影响．