档案数字化思考与研究

档案数字化建设是一项关系档案事业能否稳定、持续、健康发展的战略决策,提出了档案数字化研究方案,以推进档案数字化的健康发展。     

一种应用于设施农业的有源RFID系统设计

设计了一种应用于设施农业的有源RFID系统。系统选用TI公司的超低功耗芯片CC430,利用分布在设施农业大棚中的各个有源RFID系统标签节点,来监控作物生长的各种环境因素。同时,设计了上层应用软件,能有效实时的将各个标签捕获的信息存储并显示,并参照一些农作物生长模型合理提醒报警。     

试论动漫云渲染的解决方案

本文从高校产学研结合入手提出了在动漫专业实验实训建设的同时,提高为社会的服务能力。以云计算的理念,云渲染的办法,提出了渲染云的层次架构、硬件逻辑拓扑结构、云管理逻辑架构,很好地解决了动漫云渲染的组建。     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

Stability and work hardening of an Fe-12Cr-23Mn austenitic steel

The effect of pre-strain on the strain-induced martensitic transformation of an Fe-12Cr-23Mn austenitic steel has been investigated through transmission electron microscopy and X-ray analysis. Pre-strain was performed either at room temperature or at 200° C. Final strain was carried out at liquid-nitrogen temperature. The phase was shown to form on {1 1 1} planes of the austenite matrix predominantly by overlapping of stacking faults. The martensite transformation sequence was . Nucleation of the phase mainly occurred at intersections of bands. Austenite stability was shown to increase by pre-strain at 25° C or 200° C. Pre-strain at 200° C has a greater effect on austenite stability than does pre-strain at 25° C. The mechanism was discussed in terms of martensite transformation rate and various substructures introduced during straining. Work hardening was shown to depend on the degree of pre-strain and final strain. The correlation between work hardening and substructures introduced during straining was examined.     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

纳米晶镁铝尖晶石透明微晶玻璃的晶化行为研究

利用DTA、XRD和TEM研究了制备工艺对微晶玻璃晶化行为的影响，并制备出具有纳米镁铝尖晶石为晶相的微晶玻璃。     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

超重力对燃烧合成Ti（C，N）-TiB2复合粉体的影响

以Ti和B4C为起始反应物，分别在常规和超重力条件下通过燃烧合成技术制备出Ti（C,N）-TiB2复合粉体，利用XRD和SEM对燃烧产物进行了表征，研究了起始组成和超重力条件对燃烧产物相组成和微观形貌的影响。结果表明，燃烧产物主要由Ti（C，N）和TiB2组成，通过改变起始配方中Ti／B4C的摩尔比，可以调节产物中Ti（C，N）和TiB2的相对含量。超重力条件下，反应物颗粒接触更加充分，碰撞更加频繁，因而晶粒形态发育更加完整，生成规则的多面体。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.