Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

Growth Defects in Langasite Crystals Observed with White Beam Synchrotron Radiation Topography

Langasite single crystal was grown by the Czochralski method and its perfection was assessed by white beam synchrotron radiation topography. It is found that the growth core and the growth striations are the primary growth defects and they show strong X-ray kinematical contrast in the topographs. Another typical defect in LGS crystal is dislocation. The formation mechanisms of these growth defects in LGS crystals were discussed.     

人工颅骨用复合材料中微量甲基丙烯酸甲酯的气相色谱法测定

采用氢气焰离子化检测器(FID),以正丁醇为外标物,PEG-20M为固定相,甲醇作为溶剂,气相色谱法测定复合材料人工颅骨中微量MMA的含量。其相对标准偏差<0.022,平均回收率(n=4)为98.0％～99.1％。此方法操作简便,用于实际样品分析可得到满意的结果。     

Zk线性码的对称形式的MacWilliams恒等式

该文定义了Zk线性码的码字的对称重量计数公式，利用离散的Hadamard变换，建立了线性码与其对偶码之间的对称形式的MacWilliams恒等式．     

CO2激光治疗皮肤基底细胞癌14例临床观察

目的 :探求一种简单 ,安全 ,效果好的基底细胞癌的治疗方法。方法 :对 1 4例基底细胞癌患者在局麻下用CO2 激光行基底细胞癌切除术或切除 +气化术。结果 :患者术中、术后出血少 ,伤口恢复快 ,愈合良好 ,疤痕表浅 ,随访未见复发。结论 :CO2 激光用于治疗基底细胞癌效果良好 ,无明显副作用 ,操作简单值得推广。     

渤海湾盆地石油地质储量和产量增长趋势的预测

渤海湾盆地的石油地质储量发现过程具有明显的渐进性、阶段性和长期性，石油产量的增长也具有一定的起伏性，用一个周期的单旋回哈伯特模型难以预测其发展趋势。通过分析渤海湾盆地的勘探开发历程，结合新一轮常规油气资源评价的结果，分别采用4个和3个哈伯特旋回拟合石油地质储量发现和产量增长曲线。预测结果显示，2005-2015年渤海湾盆地处于石油地质储量发现高峰期，2015年左右其石油产量达到高峰，之后处于下降趋势。实践证明，利用多旋回哈伯特模型对具有“多峰”特征的石油地质储量和产量的未来趋势进行预测是一种有效的方法。     

地下输水管网的腐蚀调查

介绍了中国石油天然气股份有限公司大庆石化分公司地下输水管网的腐蚀现状与调查分析情况,提出了对地下输水管网实施以深井阳极地床外加电流阴极保护为主、局部欠保护区辅以镁合金牺牲阳极的阴极保护方案。经分析,采取上述防护措施后,每年可产生2488万元的经济效益。     

溶剂浸渍树脂的萃取分离性能研究

介绍了溶剂浸渍树脂的制备及性能,阐述了溶剂浸渍树脂在产物提纯和废水处理等分离过程中的应用,并对使用溶剂浸渍树脂处理含酚废水进行了初步研究.     

不同级配对微表处混和料性能的影响

微表处技术是一种性能优良的路面养护技术。首先检验了微表处用原材料的技术指标,在满足规范的要求下选择了三种不同级配,并对三种不同级配的微表处混和料的使用性能进行了比较。     

开环聚合制备聚己内酯

ε-己内酯(ε-CL)聚合催化体系主要分为正离子型、负离子型和配位型催化剂,后者催化效果较好的催化剂有锡盐、有机铝化合物及稀土化合物。聚己内酯(PCL)熔融温度较低(约为65℃),加工性能优良,易于成膜,玻璃化转变温度约为-65℃,与高分子材料相容性好,可作为大分子材料的增塑剂使用。合成工艺简单,成本较低,疏水性优良,具有卓越的渗透性。但是PCL的降解速度慢,在体内可保持1~2 a。在有恶臭假单胞菌存在及无微生物存在时,经改性后,随着分子结构的改变,PCL降解性能和力学性能均发生了明显变化。