Tar sand extractions with microemulsions: I-the dissolution of light hydrocarbons by microemulsions using 2-butoxyethanol and diethylmethylamine as cosurfactants

For oil sand extractions with microemulsions it is important to disperse large quantities of light hydrocarbons in an aqueous medium. Fundamental studies on the properties of 2-butoxyethanol (BE) and diethylmethylamine (Et₂McN) in water suggest that these two liquids could be more effective cosurfactants than the usual alcohols used for this purpose. The phase diagrams of microemulsions using BE and Et₂MeN as cosurfactants, combined with typical ionic and non-ionic surfactants and typical aliphatic and aromatic hydrocarbons, were therefore investigated and compared with microemulsions based on n-butanol. Although the phase diagrams depend significantly on the nature of the surfactant and of the oil, the monophasic region generally increases with the cosurfactant in the order n-butanol < Et₂McN < BE. With the active mixture BE-cetyltrimethylammonium bromide, temperature has little effect on the phase diagram and NaCl generally destabilizes the microemulsion.     

Re-GAN：残差生成式对抗网络算法

目的 生成式对抗网络（generative adversarial network,GAN）是一种无监督生成模型,通过生成模型和判别模型的博弈学习生成图像。GAN的生成模型是逐级直接生成图像,下级网络无法得知上级网络学习的特征,以至于生成的图像多样性不够丰富。另外,随着网络层数的增加,参数变多,反向传播变得困难,出现训练不稳定和梯度消失等问题。针对上述问题,基于残差网络（residual network,ResNet）和组标准化（group normalization,GN）,提出了一种残差生成式对抗网络（residual generative adversarial networks,Re-GAN）。方法 Re-GAN在生成模型中构建深度残差网络模块,通过跳连接的方式融合上级网络学习的特征,增强生成图像的多样性和质量,改善反向传播过程,增强生成式对抗网络的训练稳定性,缓解梯度消失。随后采用组标准化（GN）来适应不同批次的学习,使训练过程更加稳定。结果 在Cifar10、CelebA和LSUN数据集上对算法的性能进行测试。Re-GAN的IS （inception score）均值在批次为64时,比DCGAN （deep convolutional GAN）和WGAN （Wasserstein-GAN）分别提高了5%和30%,在批次为4时,比DCGAN和WGAN分别提高了0.2%和13%,表明无论批次大小,Re-GAN生成图像具有很好的多样性。Re-GAN的FID （Fréchet inception distance）在批次为64时比DCGAN和WGAN分别降低了18%和11%,在批次为4时比DCGAN和WGAN分别降低了4%和10%,表明Re-GAN生成图像的质量更好。同时,Re-GAN缓解了训练过程中出现的训练不稳定和梯度消失等问题。结论 实验结果表明,在图像生成方面,Re-GAN的生成图像质量高、多样性强;在网络训练方面,Re-GAN在不同批次下的训练具有更好的兼容性,使训练过程更加稳定,梯度消失得到缓解。     

基于SPI双机通信的弧光保护系统

针对弧光保护系统的实际需要,设计了一种基于SPI的双机通信系统。简要阐述了该系统的设计思路,并给出了具体的实现方法。实验表明,采用该方法能够满足实际工程中的需求,对于其他SPI的应用也有很好的借鉴价值。     

聚类算法在高脂血症辨证分型研究中的应用

高脂血症的辨证分型标准化研究是中医基础研究的热点与难点,利用计算机挖掘技术中的聚类算法对高脂血症临床中医症状数据进行分析,得到具有统计学意义的分类结果,同时寻找其与中医证候相对应的关系具有重要研究价值.通过编写适用于中医证候分类的聚类算法并提供设置相似度阈值等交互界面,实现了大规模样本的自适应分类,从而使聚类结果更加科学客观.将得到的每个类别中所对应样本的病症特征与所属中医的证候类别联系起来,为辨证分型标准化奠定了基础.     

GaP/GaNP Heterojunctions for Efficient Solar‐Driven Water Oxidation

The growth and characterization of an n‐GaP/i‐GaNP/p⁺‐GaP thin film heterojunction synthesized using a gas‐source molecular beam epitaxy (MBE) method, and its application for efficient solar‐driven water oxidation is reported. The TiO₂/Ni passivated n‐GaP/i‐GaNP/p⁺‐GaP thin film heterojunction provides much higher photoanodic performance in 1 m KOH solution than the TiO₂/Ni‐coated n‐GaP substrate, leading to much lower onset potential and much higher photocurrent. There is a significant photoanodic potential shift of 764 mV at a photocurrent of 0.34 mA cm^?2, leading to an onset potential of ≈0.4 V versus reversible hydrogen electrode (RHE) at 0.34 mA cm^?2 for the heterojunction. The photocurrent at the water oxidation potential (1.23 V vs RHE) is 1.46 and 7.26 mA cm^?2 for the coated n‐GaP and n‐GaP/i‐GaNP/p⁺‐GaP photoanodes, respectively. The passivated heterojunction offers a maximum applied bias photon‐to‐current efficiency (ABPE) of 1.9% while the ABPE of the coated n‐GaP sample is almost zero. Furthermore, the coated n‐GaP/i‐GaNP/p⁺‐GaP heterojunction photoanode provides a broad absorption spectrum up to ≈620 nm with incident photon‐to‐current efficiencies (IPCEs) of over 40% from ≈400 to ≈560 nm. The high low‐bias performance and broad absorption of the wide‐bandgap GaP/GaNP heterojunctions render them as a promising photoanode material for tandem photoelectrochemical (PEC) cells to carry out overall solar water splitting.     

Intrusion Detection Based on Bidirectional Long Short-Term Memory with Attention Mechanism

With the recent developments in the Internet of Things (IoT), the amount of data collected has expanded tremendously, resulting in a higher demand for data storage, computational capacity, and real-time processing capabilities. Cloud computing has traditionally played an important role in establishing IoT. However, fog computing has recently emerged as a new field complementing cloud computing due to its enhanced mobility, location awareness, heterogeneity, scalability, low latency, and geographic distribution. However, IoT networks are vulnerable to unwanted assaults because of their open and shared nature. As a result, various fog computing-based security models that protect IoT networks have been developed. A distributed architecture based on an intrusion detection system (IDS) ensures that a dynamic, scalable IoT environment with the ability to disperse centralized tasks to local fog nodes and which successfully detects advanced malicious threats is available. In this study, we examined the time-related aspects of network traffic data. We presented an intrusion detection model based on a two-layered bidirectional long short-term memory (Bi-LSTM) with an attention mechanism for traffic data classification verified on the UNSW-NB15 benchmark dataset. We showed that the suggested model outperformed numerous leading-edge Network IDS that used machine learning models in terms of accuracy, precision, recall and F1 score.     

一种指令特性可扩展的汇编器体系结构

对嵌入式处理器的汇编器进行讨论,提出一种指令特性可扩展的汇编器体系结构.在这种体系结构下能有效地加入新的指令或是改进已有指令的功能,并根据此体系结构为汇编器加入两条编译预处理命令.采用该体系结构的汇编器,能够有效降低汇编器的开发维护难度,同时能够增加汇编程序的编写效率.     

Scalable continuous object detection and tracking in sensor networks

With the advancement of MEMS technologies, sensor networks have opened up broad application prospects. An important issue in wireless sensor networks is object detection and tracking, which typically involves two basic components, collaborative data processing and object location reporting. The former aims to have sensors collaborating in determining a concise digest of object location information, while the latter aims to transport a concise digest to sink in a timely manner. This issue has been intensively studied in individual objects, such as intruders. However, the characteristic of continuous objects has posed new challenges to this issue. Continuous objects can diffuse, increase in size, or split into multiple continuous objects, such as a noxious gas. In this paper, a scalable, topology-control-based approach for continuous object detection and tracking is proposed. Extensive simulations are conducted, which show a significant improvement over existing solutions.