Modeling electromigration lifetime under bidirectional currentstress

Electromigration reliability of interconnect under bidirectional current stress has been studied in a wide frequency range (mHz to 200 MHz). Experimental results show that the AC lifetime rises with the stress current frequency. The current density exponent and the activation energy of AC lifetime are found to be twice that of DC lifetime. Pure AC current stress failure at extremely high current density is believed to result from thermal migration of metal at hot/cold transition points     

Mathematical simulation and experimental verification of melting resulting from the coupled effect of natural convection and exothermic heat of mixing

When melting processes are associated with an exothermic heat of mixing, unique coupled transport phenomena take place. In this article, a mathematical model has been developed to simulate these unique coupled heat and mass transfer events. The model was based on the control-volume finite difference approach and on an enthalpy method. In order to verify the mathematical model, a low-temperature physical model was established consisting of ice and sulfuric acid solutions. In this physical model, both temperature and velocity measurements were carried out. The model predictions were compared with experimental measurements, and they were found to be in good agreement. The model was also applied to a high-temperature system, namely, the melting of silicon metal in liquid high carbon iron. The predictions distinguished two periods present in the entire melting process. In the first period, the silicon was heated up. The second period, i.e., free melting period, occurred in tandem with the exothermic reaction, and consequently, the melting process was greatly accelerated. As was the case with the low-temperature physical model, as with the high-temperature system, good agreement was obtained between the predicted results and the experimental measurements.     

用迁移率和载流子浓度研究碲镉汞中的深能级

获得了一种研究碲镉汞深能级的方法。通过分析迁移率 载子浓度与温度的关系，可以得到关于深能级的重要依据。     

络合沉淀法制备BaTiO_3超细粉末

在分析ＢａＴｉＯ_３前驱体形成机理的基础上，提出了以草酸作为络合剂，用络合沉淀法制备超细ＢａＴｉＯ_３新工艺。用化学分析法测定产物Ｂａ／Ｔｉ比，用ＸＲＤ、ＴＥＭ、ＢＩ－９０激光散射粒度仪对产物的晶型、粒度及形貌进行表征。结果表明：采用该法合成的前驱体，微观组分确定，粒径小，粒度分布窄，近似球形，煅烧后为高纯超细ＢａＴｉＯ_３粉末。     

中国的三种非同步轨道卫星移动通信系统星座方案

本文介绍基于我国的三种非同步轨道卫星移动通信系统星座方案：低、中轨系统各有２４和１８颗星，轨道高度分别为１３２６和８０３５ｋｍ，两系统各以５°和３０°的仰角对我国的覆盖率为９９．７８％和９９．９６％；椭圆轨道系统１２颗星，近、远地点分别为４２７和２９０６ｋｍ，以７°和１５°仰角对我国北纬２０°以上地区覆盖率分别为９７．９０％和８９．６１％，若增加４颗中轨卫星，以１５°仰角对我国的覆盖率为９９．９９％。     

B－ISDN与现有网络互连的研究

本文主要围绕Ｂ－ＩＳＤＮ与现有各种网络（如ＰＳＰＤＮ、ＰＳＴＮ、ＬＡＮ等）的互连问题展开讨论，并针对不同的应用场合提出了相应的互连解决方案。     

COMAS制丝线振动输送机的振动分析

本文根据振动理论对卷烟厂ＣＯＭＡＳ制丝生产线上的振动输送机建立了相应的力学模型及其振动方程。通过对振动方程的求解，分析了该振动输送机的振动特点，并提出了主要参数的选取原则，以期减少基础的振动。     

Cluster analysis in industrial market segmentation through artificial neural network

Market segmentation has commonly applied cluster analysis. This study intends to make the comparison of conventional two-stage method with proposed two-stage method through the simulated data. The proposed two-stage method is the combination of self-organizing feature maps and K-means method. The simulation results show that the proposed scheme is better than the conventional two-stage method based on the rate of misclassification.     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

利用梯度方向信息的随机Hough变换

针对随机Ｈｏｕｇｈ变换（ＲＨＴ）在处理复杂图像随机采样造成的大量无效积累提出一种改进的用于直线检测的ＲＨＴ，较发地解决了无效果累积问题，并使改进后的算法具有计算速度更快，占用内存更少以及检测性能更好等优点。