Controller Design Using Ant Colony Algorithm for a Non-inverting Buck–Boost Chopper Based on a Detailed Average Model

In this article, the non-inverting buck–boost converter and its operation modes are scrutinized. The closed-loop stability of the converter in buck and boost modes is analyzed, and the necessity of using an appropriated controller is demonstrated. Then the application of an adapted ant colony optimization to design a feedback controller is proposed, and a controller based on its existing model is tuned. Simulation and experimental results obtained from the ant colony optimization designed controller are then compared with a controller designed with the classic method. Although the simulation and experimental results prove the efficiency of the proposed control approach, a significant difference between controller behavior in practice and simulation is obvious. Finding these differences, more detailed models, including all parasitic elements, in the buck and boost modes are derived. Applying the proposed model in controller design illustrates that the desired performance of the converter can be guaranteed with a simple proportional-integral (PI) controller. The suggested ant colony-based controller is again tuned based on the more detailed model, which improves the performance of the converter system even more. Furthermore, good agreement between analytical and experimental outputs validates the accuracy of the modeling and simulation.     

Surfactant-Assisted Dispersion of MWCNTs in Epoxy Resin Used in CFRP Strengthening Systems

The epoxy resin used as the bonding agent in carbon fiber-reinforced polymer (CFRP) strengthening systems was modified by the infusion of multiwalled carbon nanotubes (MWCNTs). Two types of surfactants, Triton X-100 and C₁₂E₈, were used to disperse the nanotubes in the epoxy resin employing ultrasonic mixing. Dynamic mechanical analysis and tensile tests were conducted to study the effect of the surfactant-assisted dispersion of nanotubes on the thermal and mechanical properties of epoxy composites. The morphology of the epoxy composites was interpreted using scanning electron microscopy (SEM). Moreover, the effect of surfactant treatment on the structure of nanotubes was investigated by Fourier transform infrared (FT-IR). Based on the experimental results, the tensile strength and the storage modulus of the epoxy resin were increased by 32% and 26%, respectively, by the addition of MWCNTs. This was attributed to the homogeneous dispersion of nanotubes in the epoxy resin according to the SEM images. Another reason for the enhancement in the tensile properties was the reinforced nanotube/epoxy interaction as a result of the surfactant anchoring effect which was proved by FT-IR. A moderate improvement in the glass transition temperature (T _g) was recorded for the composite fabricated using Triton X-100, which was due to the restricted molecular motions in the epoxy matrix. To characterize the temperature-dependent tensile behavior of the modified epoxy composites, tensile tests were conducted at elevated temperatures. It was revealed that the MWCNT modification using surfactant substantially improves the tensile performance of the epoxy adhesive at temperatures above the T _g of the neat epoxy.     

考虑相关性的间歇性分布式电源选址定容规划

节能减排背景下,以分布式风电和光伏为代表的间歇性分布式电源得到了快速发展。考虑风速、光照强度和负荷间的相关性,以年综合费最小为目标,利用机会约束规划方法建立了间歇性分布式电源选址定容规划模型。采用秩相关系数矩阵表征风速、光照强度和负荷间的相关性,利用拉丁超立方采样和Cholesky分解生成相关性样本矩阵。应用动态小生境差分进化算法对规划模型进行求解。IEEE 33节点配电网算例的仿真结果验证了模型的合理性。     

Synthesis and Characterization of Superparamagnetic NiBaO<Subscript>2</Subscript> Nano-Oxide Using Novel Precursor Complex [Ba(H<Subscript>2</Subscript>O)<Subscript>8</Subscript>][Ni(dipic)<Subscript>2</Subscript>]

In this paper, for the first time, synthesis of [Ba(H₂O)₈][Ni(dipic)₂] complex and preparation of NiBaO₂ nano-oxide are reported through thermal decomposition under surfactant free condition. This novel complex was characterized by Fourier transform infrared spectroscopy (FT-IR), ultra violet–visible spectroscopy, conductivity measurement and elemental analysis. Formation of novel nanoparticles was supported by FT-IR and energy-dispersive X-ray spectroscopy and the orthorhombic structure of nanocrystals was confirmed by powder X-ray diffraction analysis. In addition, size distribution as well as uniform morphology of prepared nano-oxide were recorded by dynamic light scattering analysis and field-emission scanning electron microscopy, respectively. Magnetic features measured by vibrating sample magnetometer, illustrate superparamagnetic behavior of the oxide.     

Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

Impact of Coronavirus Pandemic Crisis on Technologies and Cloud Computing Applications

In light of the coronavirus disease 2019 (COVID-19) outbreak caused by the novel coronavirus, companies and institutions have instructed their employees to work from home as a precautionary measure to reduce the risk of contagion. Employees, however, have been exposed to different security risks because of working from home. Moreover, the rapid global spread of COVID-19 has increased the volume of data generated from various sources. Working from home depends mainly on cloud computing (CC) applications that help employees to efficiently accomplish their tasks. The cloud computing environment (CCE) is an unsung hero in the COVID-19 pandemic crisis. It consists of the fast-paced practices for services that reflect the trend of rapidly deployable applications for maintaining data. Despite the increase in the use of CC applications, there is an ongoing research challenge in the domains of CCE concerning data, guaranteeing security, and the availability of CC applications. This paper, to the best of our knowledge, is the first paper that thoroughly explains the impact of the COVID-19 pandemic on CCE. Additionally, this paper also highlights the security risks of working from home during the COVID-19 pandemic.     

Photovoltaic-powered piston-type water pump controlled by a linear motor

This paper presents a unique technique to control a photovoltaic (PV)-powered piston-type water pump. the method uses a linear motor mounted directly onto the piston rod of the pump. This linear motor method replaces the traditional piston-type water pump, which employs a DC motor with a bulky gear mechanism to convert the rotational motion of the motor to linear motion for the piston. The electric circuit used to control the linear motor employs a four-quadrant chopper, which uses four fast MOSFETs and a simple logic circuit for the switching. The experimental results show that the PV-powered linear motor system can be used as an alternative to the PV-powered DC motor gear system.     

Uncoupling Proteins and Regulated Proton Leak in Mitochondria

Higher concentration of protons in the mitochondrial intermembrane space compared to the matrix results in an electrochemical potential causing the back flux of protons to the matrix. This proton transport can take place through ATP synthase complex (leading to formation of ATP) or can occur via proton transporters of the mitochondrial carrier superfamily and/or membrane lipids. Some mitochondrial proton transporters, such as uncoupling proteins (UCPs), transport protons as their general regulating function; while others are symporters or antiporters, which use the proton gradient as a driving force to co-transport other substrates across the mitochondrial inner membrane (such as phosphate carrier, a symporter; or aspartate/glutamate transporter, an antiporter). Passage (or leakage) of protons across the inner membrane to matrix from any route other than ATP synthase negatively impacts ATP synthesis. The focus of this review is on regulated proton transport by UCPs. Recent findings on the structure and function of UCPs, and the related research methodologies, are also critically reviewed. Due to structural similarity of members of the mitochondrial carrier superfamily, several of the known structural features are potentially expandable to all members. Overall, this report provides a brief, yet comprehensive, overview of the current knowledge in the field.     

Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.