Ti_3Al基金属间化合物的研究进展

对Ti3 Al基金属间化合物的研究情况及其合金组织、力学性能、影响因素作了概述 ,并重点介绍了其熔炼技术和铸造特性。最后 ,展望Ti3 Al基金属间化合物在航空航天领域的发展前景     

无缝管轧制变形区内金属流动和摩擦力的实验研究

用自行设计的实验装置真实描述出无缝管轧制变形区内单位轧制力，纵、横向摩擦力的分布规律，绘制出变形区各点的摩擦力分布和金属流动轨迹图。     

压缩机活塞挤压铸造成形技术研究

通过提出几种不同的挤压铸造工艺方案，研究了挤压铸造技术成形压缩机活塞的可行性。结果表明，采用直接式挤压铸造以1模4型腔，对保证制件质量，提高生产效率是有利的；采用间接式挤压铸造以液流从制件两端厚壁处进入型腔，模具以侧抽芯拉杆式卸料机构更为合理。     

The integrated intelligent system for welding seam error and penetration depth identification

A integrated intelligent system for seam tracking and penetration control is given. The system received information of welding seam error and penetration depth from only one sensor, then, it realized seam tracking and penetration control simultaneously. This paper introduces constitution of the system, methods of information recognition, design of the neuralfuzzy controller and results practically.     

SiC颗粒增强锌基复合材料硬度的研究

本文研究了热处理条件对ＳｉＣ／Ｚｎ基复合材料硬度的影响，分析了循环等温处理过程中复合材料硬度的变化规律，并讨论了复合材料组分、温度以及热处理条件与该复合材料硬度特性的关系，提出了改善这类复合材料硬度的途径。     

模态分析技术及其在锻压工程中的应用前景

本文介绍了模态分析技术的概念、目的、内容和方法,论述了模态分析技术在锻压工程中的应用前景,以及它在建立锻压机械动态设计理论中的作用。     

EFFECT OF PROGRESSIVE AGING TREATMENT ON THE PROPERTIES AND MICROSTRUCTUR

ＥＦＦＥＣＴＯＦＰＲＯＧＲＥＳＳＩＶＥＡＧＩＮＧＴＲＥＡＴＭＥＮＴＯＮＯＮＴＨＥＰＲＯＰＥＲＴＩＥＳＡＮＤＭＩＣＲＯＳＴＲＵＣＴＵＲＥＯＦＴＨＥＨＩＧＨ－ＨＡＲＤＥＬＡＳＴＩＣＮＩＣＫＥＬ－ＣＨＲＯＭＩＵＭ－ＡＬＵＭＩＮＩＵＭＡＬＬＯＹ￥ＬＩＵＧｕｉ...     

Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process

In this paper, in situ synthesized TiC particles reinforced Fe-based surface composite coatings by multi-pass overlapping gas tungsten arc welding (GTAW) melting process employing a proper amount of graphite and ferrotitanium (FeTi) on AISI 1020 steel substrate was produced. The microstructure and wear properties of the composite coatings were investigated by means of an electron microprobe microanalysis (EPMA), X-ray diffractometer and wear tester. The results showed that the multi-pass overlapping GTAW melting surface composite coatings can be obtained under suitable welding parameters, and no crack and porosity are found in the tracks. The X-ray and EPMA results confirm that TiC particles can be formed via reaction of FeTi and graphite during multi-pass overlapping GTAW melting process. TiC particles present cubic and dendrite shape in the non-overlapping zone. It is found that there occurred TiC particles coarsening at the overlap regions, which can lead to detrimental effects on the hardness and wear performance. Composite coatings give a high hardness and excellent wear resistance; and the wear friction coefficient of the coating is less than that of the 1020 steel. As a result, multi-pass overlapping GTAW melting process can be used effectively for producing surface composite coatings with a pre-placed powder to improve wear resistance of the AISI 1020 steel.     

基于LIGA技术的微细电火花加工优化研究

比较了活动掩膜法与固定掩膜法得到的PMMA胶结构,实验表明固定掩膜法更适合于多次曝光.结合LIGA技术和微细电火花加工的优点,用LIGA技术制备出具有复杂形状的铜微细工具电极,再用该工具电极进行微细电火花加工,在不锈钢上加工出异形微细孔.并通过进一步调整电火花加工工艺参数,优化了加工尺寸精度和表面粗糙度.     

Synchronization for linear singularly perturbed complex networks with coupling delays

This paper is concerned with the synchronization problem about linear singularly perturbed complex network system with coupling delay. The sufficient delay-dependent conditions for the synchronization of the network are established by introducing an equivalent network system with the Lyapunov stability theory. These conditions, which are formulated in terms of linear matrix inequalities, can be solved efficiently by the LMI toolbox of MATLAB. A simulation example is provided to show the validity of the proposed the synchronization conditions of the whole network.