The failure of an F/A-18 trailing edge flap hinge

During a flight over sea, the right-hand trailing-edge flap (TEF) from an RAAF F/A-18 separated. Although the flap was not recovered, the mode of failure suggested that the outboard hinge lug was first to fail. A fleet-wide inspection of the TEF outer hinge lugs disclosed two other cracked hinge lugs. Examination of these cracks revealed that they had propagated as the result of a combination of corrosion and fatigue, in that the corrosive environment appeared to have accelerated the fatigue crack growth rate. Laboratory experiments indicated that, in a salt solution, the 7050 aluminium alloy from which the lugs were manufactured is susceptible to corrosion fatigue and that the observed cracking matched that on the cracked lugs: corrosion fatigue was therefore suspected to have been a contributing factor in the unexpected failure. Quantitative fractography on the fatigue cracks, combined with several assumptions and deductions, including information about the failure size of the crack gained from witness marks found on the monoball bearing of the failed TEF, led to an estimate of the fatigue crack growth rate. This crack growth rate and the short service life clearly indicated the limitations of the then-current non-destructive inspection (NDI) technique, and a more sensitive inspection method was developed to assist in the maintenance of adequate RAAF flying hours between inspections. This failure investigation provided an excellent example of how fractography, laboratory experiments and NDI can be combined to determine a possible cause of failure and to establish remedial measures for the fleet.     

钢铁厂材料核算决策支持系统

本文介绍了钢铁厂材料核算系统的决策支持系统，描述了系统结构，模型自动生成方法，并用层次分析法说明钢铁厂材料采购的决策过程。     

An electromigration failure model for interconnects under pulsedand bidirectional current stressing

An electromigration failure model which can be used to project the electromigration lifetime under pulsed DC and AC current stressing has been reported. The experimental results indicate that different metallization systems (Al-2%Si, Al4%Cu/TiW, and Cu) show similar failure behaviors, which can be explained and predicted by this model. The pulsed DC lifetime is found to be longer than DC lifetime, and the AC lifetime is found to be very much longer. This recognition can provide significant relief to circuit designs involving metals carrying pulsed DC and AC currents, and allow a more aggressive design to improve circuit density and speed     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

Studies on thermal fatigue in 3Cr2W8V die steel by positron lifetime and hardness measurements

Studies on thermal fatigue in 3Cr2W8V die steel have been carried out by using positron lifetime and microhardness measurements. It is found that the mean positron lifetime and the microhardness exhibit periodic up-and-down variations with an increase in the number of fatigue cycles. The experiments indicate that in the process of thermal fatigue there are two opposing effects on variation of defects: microdeformation and dynamic recovery and recrystallization.     

液体聚丁二烯的环氧化

分析了影响环氧化聚丁二烯合成条件的诸多因素、原料以及产物的结构，为该产品的实际应用创造条件。     

随钻气侵检测仪在胜利油田的应用

简要介绍了随钻气侵检测仪的结构特点、工作原理、现场模拟试验及应用情况。中原油田全尺寸实验井和胜利油田６口井的现场试验及应用结果表明，该仪器能实现早期气侵检测，比常规方法检测到气侵的时间明显提前，对高压气井和复杂地层井控具有重要的现实意义。     

全球电信界的战略联盟

９０年代初，随着通信向全球化方向发展，发达国家各电信企业纷纷采用联盟的方式，相互联合，发挥各自优势，大举进军全球电信市场。面对这种联盟潮流，想要搭上全球通信的列车，发展中国家应该采取什么措施？坚持什么原则？本文作者对此进行了较深入的分析和研究，并对中国电信的发展提出了建议。