Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation

The resulting surface quality after 5-axis ball end milling is of superior importance because finish milling is often the last process step determining the functional performance of a component. However, the prediction of surface topography is still a challenging task. Especially in ball end milling with the characteristic sickle shaped chip cross section, ploughing effects in the area of low chip thickness result in plastic deformation and surface defects (also known as burr). This paper provides a new approach to predict those surface defects by considering the minimum chip thickness for complex milling engagement conditions within a virtual process design. This allows the choice of suitable process parameters without extensive experimental efforts.     

Temperature Stability of Lead‐Free Niobate Piezoceramics with Engineered Morphotropic Phase Boundary

The temperature dependence of piezoelectric properties (direct piezoelectric coefficient d₃₃, converse piezoelectric coefficient d₃₃(E = 0), strain S and electromechanical coupling coefficient k_p) for two niobate‐based lead‐free piezoceramics have been contrasted. 0.92(Na_0.5K_0.5)NbO₃–0.02(Bi_1/2Li_1/2)TiO₃–0.06BaZrO₃ (6BZ/2BLT/92NKN) has a morphotropic phase boundary (MPB) between rhombohedral and tetragonal at room temperature and 0.92(Na_0.5K_0.5)NbO₃–0.03(Bi_1/2Li_1/2)TiO₃–0.05BaZrO₃ (5BZ/3BLT/92NKN) features an MPB engineered to be located below room temperature. At 30°C, d₃₃, d₃₃(E = 0), S (at 2 kV/mm), and k_p are 252 pC/N, 230 pm/V, 0.069%, 0.51 for 5BZ/3BLT/92NKN; and 348 pC/N, 380 pm/V, 0.106%, 0.57 for 6BZ/2BLT/92NKN, respectively. With increasing temperature, the piezoelectric properties decrease. At 200°C, d₃₃, d₃₃(E = 0), S (at 2 kV/mm), and k_p are 170 pC/N, 160 pm/V, 0.059%, 0.36 for 5BZ/3BLT/92NKN; and 181 pC/N, 190 pm/V, 0.061%, 0.39 for 6BZ/2BLT/92NKN. It is found that the electromechanical coupling coefficient has a better temperature stability than the piezoelectric coefficient in the studied system due to a large temperature‐dependent compliance change. The results demonstrate that engineering an MPB is highly effective in tailoring temperature stability of piezoceramics.     

Urban Imaginaries: Locating the Modern City

In this article, we review three microcomputer programs for assessing regional economic impacts. The programs are ADOTMATR, GRIMP, and REMI, which we discuss in terms of their suitability for policy analysis and planning practice. We assess the programs in terms of range of applicability, flexibility and ease of use in conducting impact analyses, quality of output, and cost. ADOTMATR and GRIMP are similar; however, GRIMP is easier to use but less flexible and more limited than ADOTMATR. Although REMI is more sophisticated than the other two programs, it is more expensive and more limited in application.     

Effect of polymerization catalyst technology on the melt processing stability of polyethylenes,Part 3: Additives blends performance

This article considers the interaction between additives that occur during the stabilization process. The simultaneous effects of the additives and associated interactions on melt processing stability and processing discoloration were of particular interest. Melt stability is an important factor to consider because physical changes in the processed polymer can occur during the compounding and fabrication steps. Furthermore, discoloration is one of the most important problems affecting commercial polymers. Most discoloration manifests itself as yellowing, especially in the case of polyolefins. Although yellowing can often be associated with degradation processes caused by various agents, such as light or heat, this is not always the case; yellowing can also be due to the interaction of additives in the stabilizer packages. Blends of primary antioxidants (AOs), secondary AOs, and hindered amine light stabilizers have been studied with the intention of further improving stabilization performance together with cost reduction of the stabilized polymer. Although synergism between AOs and a stabilizer is fairly common, antagonism was also observed in terms of melt flow protection and in color stability in some of the AOs tested. The effects of a range of thermal and light stabilizers on the melt stability (investigated via multiple pass extrusion) and color stability of three different polyethylenes (PEs) were examined. The PEs varied in terms of the catalyst system used to synthesize the polymers and included a high‐density polyethylene (HDPE) produced by using a chromium‐based Phillips catalyst and two linear low‐density polyethylenes (LLDPEs) produced via chromium‐based metallocene and titanium‐based Ziegler‐Natta catalysts. The apparent lack of influence of polymerization catalyst system on the mode of stabilizer interaction should lead to the reassessment of stabilizer formulation strategies in relation to PE type/catalyst system and associated commercial/economic considerations. J. VINYL ADDIT. TECHNOL., 22:117–127, 2016. © 2014 Society of Plastics Engineers     

Impedance Spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 Ceramics Modified with (K0.5Na0.5)NbO3

The electrical and dielectric properties of (1 ? x)(0.94Bi_1/2Na_1/2TiO₃–0.06BaTiO₃)–x(K_0.5Na_0.5NbO₃) with x = 0, 0.03, 0.09, 0.18 have been investigated by impedance spectroscopy over a wide temperature range. The dc conductivity of the ceramics follows the Arrhenius law with an activation energy ranging from ~1.20 to 1.50 eV. Measurements under different atmospheres show the materials exhibit n‐type semiconducting behavior at elevated temperatures. The presence of a highly polarizable phase for all compositions is revealed by electric modulus (M″) spectra. The Burns temperature decreases with increasing KNN content. The change in temperature‐dependent permittivity with composition is explained by the difference in thermal evolution of polar nanoregions induced by the addition of KNN.     

Optimization of dopamine determination based on nanowires PEDOT/polydopamine hybrid film modified electrode

Poly(3,4-ethylenedioxythiophene) nanowires (nw-PEDOT), between 6.7–13.8 nm diameter, were obtained by electrochemical methods utilizing modified electrodes with silicon oxide as a template to afford a Pt/nw-PEDOT electrode. Dopamine electro-polymerization was next accomplished upon this electrode (Pt/nw-PEDOT/PDA). The Pt/nw-PEDOT/PDA assembly is capable of hindering interfering signals such as those from ascorbic and uric acid, enabling thus the selective detection of dopamine. Amperometric determination studies allowed limit of detection and limit of quantification limits of 0.47 and 1.59 µM, respectively, to be established. These limits were lower than those obtained with the same conducting polymer but without a nanowire structure.     

Biological Implications of a Stroke Therapy Based in Neuroglobin Hyaluronate Nanoparticles. Neuroprotective Role and Molecular Bases

Exogenous neuroprotective protein neuroglobin (Ngb) cannot cross the blood–brain barrier. To overcome this difficulty, we synthesized hyaluronate nanoparticles (NPs), able to deliver Ngb into the brain in an animal model of stroke (MCAO). These NPs effectively reached neurons, and were microscopically identified after 24 h of reperfusion. Compared to MCAO non-treated animals, those treated with Ngb-NPs showed survival rates up to 50% higher, and better neurological scores. Tissue damage improved with the treatment, but no changes in the infarct volume or in the oxidative/nitrosative values were detected. A proteomics approach (p-value < 0.02; fold change = 0.05) in the infarcted areas showed a total of 219 proteins that significantly changed their expression after stroke and treatment with Ngb-NPs. Of special interest, are proteins such as FBXO7 and NTRK2, which were downexpressed in stroke, but overexpressed after treatment with Ngb-NPs; and ATX2L, which was overexpressed only under the effect of Ngb. Interestingly, the proteins affected by the treatment with Ngb were involved in mitochondrial function and cell death, endocytosis, protein metabolism, cytoskeletal remodeling, or synaptic function, and in regenerative processes, such as dendritogenesis, neuritogenesis, or sinaptogenesis. Consequently, our pharmaceutical preparation may open new therapeutic scopes for stroke and possibly for other neurodegenerative pathologies.     

Medicated Scaffolds Prepared with Hydroxyapatite/Streptomycin Nanoparticles Encapsulated into Polylactide Microfibers

The preparation, characterization, and controlled release of hydroxyapatite (HAp) nanoparticles loaded with streptomycin (STR) was studied. These nanoparticles are highly appropriate for the treatment of bacterial infections and are also promising for the treatment of cancer cells. The analyses involved scanning electron microscopy, dynamic light scattering (DLS) and Z-potential measurements, as well as infrared spectroscopy and X-ray diffraction. Both amorphous (ACP) and crystalline (cHAp) hydroxyapatite nanoparticles were considered since they differ in their release behavior (faster and slower for amorphous and crystalline particles, respectively). The encapsulated nanoparticles were finally incorporated into biodegradable and biocompatible polylactide (PLA) scaffolds. The STR load was carried out following different pathways during the synthesis/precipitation of the nanoparticles (i.e., nucleation steps) and also by simple adsorption once the nanoparticles were formed. The loaded nanoparticles were biocompatible according to the study of the cytotoxicity of extracts using different cell lines. FTIR microspectroscopy was also employed to evaluate the cytotoxic effect on cancer cell lines of nanoparticles internalized by endocytosis. The results were promising when amorphous nanoparticles were employed. The nanoparticles loaded with STR increased their size and changed their superficial negative charge to positive. The nanoparticles’ crystallinity decreased, with the consequence that their crystal sizes reduced, when STR was incorporated into their structure. STR maintained its antibacterial activity, although it was reduced during the adsorption into the nanoparticles formed. The STR release was faster from the amorphous ACP nanoparticles and slower from the crystalline cHAp nanoparticles. However, in both cases, the STR release was slower when incorporated in calcium and phosphate during the synthesis. The biocompatibility of these nanoparticles was assayed by two approximations. When extracts from the nanoparticles were evaluated in cultures of cell lines, no cytotoxic damage was observed at concentrations of less than 10 mg/mL. This demonstrated their biocompatibility. Another experiment using FTIR microspectroscopy evaluated the cytotoxic effect of nanoparticles internalized by endocytosis in cancer cells. The results demonstrated slight damage to the biomacromolecules when the cells were treated with ACP nanoparticles. Both ACP and cHAp nanoparticles were efficiently encapsulated in PLA electrospun matrices, providing functionality and bioactive properties.     

Nonhomogeneous flow of micellar solutions: A kinetic—network theory approach

The rheological behavior of micellar solutions is analyzed under nonhomogeneous velocity and stress flow conditions. The framework is based on the extended irreversible thermodynamics and the transient network formulation coupled to the underlying kinetics embodying two relevant processes: formation of wormlike chains from a free micellar solution through a thermally activated process and their flow induced degradation. The second kinetic process consists in the formation of entanglements from the free wormlike chains and their flow‐induced breakage. These processes are modeled in a coupled kinetic scheme constituted by a set of reversible kinetic equations describing the evolution in average of the three microstates (free short rod‐like micelles, free wormlike chains, and entangled wormlike chains) that reflect the complexity of macromolecular interactions. The predictions of the shear stress and first normal stress difference as a function of shear‐rate under banded flow are in good agreement with experimental data. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2277–2292, 2018     

Biobutanol Dehydrogenation to Butyraldehyde over Cu,Ru and Ru–Cu Supported Catalysts. Noble Metal Addition and Different Support Effects

Abstract  

n-Butanol dehydrogenation to butyraldehyde was studied using Ru, Cu and Ru–Cu catalysts supported on ceria, titania and zirconia. Among the monometallic Cu and Ru supported catalysts, the non-noble catalytic systems recorded higher conversions and butyraldehyde selectivities than the noble catalysts. Furthermore, the 5Cu/ZrO₂ catalyst had the best catalytic activity and selectivity. This behaviour is related to the good metal phase dispersion on the zirconia structure. The addition of Ru reduced this catalyst’s performance because Ru incorporation weakened the Cu-support interaction and favoured the sintering of the Cu metal crystallites.