Effect of polymerization catalyst technology on the melt processing stability of polyethylenes,Part 3: Additives blends performance

This article considers the interaction between additives that occur during the stabilization process. The simultaneous effects of the additives and associated interactions on melt processing stability and processing discoloration were of particular interest. Melt stability is an important factor to consider because physical changes in the processed polymer can occur during the compounding and fabrication steps. Furthermore, discoloration is one of the most important problems affecting commercial polymers. Most discoloration manifests itself as yellowing, especially in the case of polyolefins. Although yellowing can often be associated with degradation processes caused by various agents, such as light or heat, this is not always the case; yellowing can also be due to the interaction of additives in the stabilizer packages. Blends of primary antioxidants (AOs), secondary AOs, and hindered amine light stabilizers have been studied with the intention of further improving stabilization performance together with cost reduction of the stabilized polymer. Although synergism between AOs and a stabilizer is fairly common, antagonism was also observed in terms of melt flow protection and in color stability in some of the AOs tested. The effects of a range of thermal and light stabilizers on the melt stability (investigated via multiple pass extrusion) and color stability of three different polyethylenes (PEs) were examined. The PEs varied in terms of the catalyst system used to synthesize the polymers and included a high‐density polyethylene (HDPE) produced by using a chromium‐based Phillips catalyst and two linear low‐density polyethylenes (LLDPEs) produced via chromium‐based metallocene and titanium‐based Ziegler‐Natta catalysts. The apparent lack of influence of polymerization catalyst system on the mode of stabilizer interaction should lead to the reassessment of stabilizer formulation strategies in relation to PE type/catalyst system and associated commercial/economic considerations. J. VINYL ADDIT. TECHNOL., 22:117–127, 2016. © 2014 Society of Plastics Engineers     

Influence of Zn2+ doping on the morphotropic phase boundary in lead-free piezoelectric (1 – x)Na1/2Bi1/2TiO3-xBaTiO3

A series of morphotropic phase boundary (MPB) compositions of (1–x)Na_1/2Bi_1/2TiO₃-xBaTiO₃ (x = 0.05, 0.055, 0.06, 0.065, 0.07), with and without 0.5 mol% Zn-doping was synthesized using the solid-state route. The samples were characterized using X-ray diffraction, dielectric analysis, and electromechanical measurements (piezoelectric d₃₃ coefficient, coupling factor k_p, mechanical quality factor Q_m, and internal bias field E_bias). The increase in the ferroelectric-relaxor transition temperature upon Zn-doping was accompanied by a shift of the MPB toward the Na_1/2Bi_1/2TiO₃-rich side of the phase diagram. Higher tetragonal phase fraction and increased tetragonal distortion were noted for Zn-doped (1 – x)Na_1/2Bi_1/2TiO₃-xBaTiO₃. In addition, ferroelectric hardening and the presence of an internal bias field (E_bias) were observed for all doped compositions. The piezoelectric constant d₃₃ and the coupling coefficient k_p decreased by up to ∼30%, while a 4- to 6-fold increase in Q_m was observed for the doped compositions. Apart from establishing a structure–property correlation, these results highlight the chemically induced shift of the phase diagram upon doping, which is a crucial factor in material selection for optimal performance and commercialization.     

Technological Implications of Modifying the Extent of Cell Wall-Proanthocyanidin Interactions Using Enzymes

The transference and reactivity of proanthocyanidins is an important issue that affects the technological processing of some fruits, such as grapes and apples. These processes are affected by proanthocyanidins bound to cell wall polysaccharides, which are present in high concentrations during the processing of the fruits. Therefore, the effective extraction of proanthocyanidins from fruits to their juices or derived products will depend on the ability to manage these associations, and, in this respect, enzymes that degrade these polysaccharides could play an important role. The main objective of this work was to test the role of pure hydrolytic enzymes (polygalacturonase and cellulose) and a commercial enzyme containing these two activities on the extent of proanthocyanidin-cell wall interactions. The results showed that the modification promoted by enzymes reduced the amount of proanthocyanidins adsorbed to cell walls since they contributed to the degradation and release of the cell wall polysaccharides, which diffused into the model solution. Some of these released polysaccharides also presented some reactivity towards the proanthocyanidins present in a model solution.     

Raman characterization of carbon materials under non-hydrostatic conditions

Raman spectroscopy experiments on double-wall carbon nanotube and highly oriented pyrolytic graphite (HOPG) samples subjected to non-hydrostatic conditions have been conducted in anvil cells to study the effect of the pressure/stress on the bands assigned to defects. Typical diamond anvils used in high pressure experiments have been substituted by moissanite (6H-SiC) and sapphire (Al₂O₃) anvils to allow the observation of the D band (around 1350 cm⁻¹) and the second-order Raman scattering without interference. We demonstrate that Raman experiments at high pressure provide unique information to probe the mechanical behaviour of carbon materials (CMs). We also show that this can be also a powerful technique to assign controversial spectral features such as those appearing in the second order region of the spectra of CMs. In HOPG samples we find that the D′/D band intensity ratio is independent of stress. The results indicate that an increase of non-hydrostatic stresses on HOPG generates graphitic domains with sizes around 20–30 nm when the sample is recovered to room conditions.     

Hydration of a low‐grade magnesium oxide. Lab‐scale study

BACKGROUND: Low grade magnesium oxide (LG‐MgO) is a by‐product from the calcination of natural magnesite that is currently hydrated to magnesium hydroxide by storing it in the open for up to 6 months. It is eight to ten times cheaper than pure magnesium oxide and therefore the revalorization of this by‐product is very attractive for those applications requiring great quantities of magnesium hydroxide for which high purity is not required. Here the hydration of LG‐MgO is studied as a function of two parameters: hydrating agent and temperature. RESULTS: Addition of acetic acid during the hydration of LG‐MgO improved the effectiveness of treatment. At 50 °C, the maximum percentage hydration was 40% in pure water and increased to 65% and 70% using aqueous solutions of 0.5 and 1.0 mol L^?1 acetic acid. Increase of temperature also had a positive effect on the final degree of hydration. When the treatment was carried out with 0.5 mol L^?1 acetic acid, the hydration increased from 50 to 65 and 80% at 25, 50 and 90 °C respectively. Accordingly under the optimum conditions of 90 °C and 0.5 mol L^?1 acetic acid 80% hydration was achieved within 8 h. CONCLUSIONS: The results showed that much shorter hydration times are possible and therefore an industrial alternative to the spontaneous process could satisfy an increasing demand for magnesium hydroxide. Moreover, agitation is not needed as the reaction is chemically controlled. Copyright © 2012 Society of Chemical Industry     

On the coupling in molecular motions: A novel molecular micro-structure approach to the physical meaning of the Ngai's coupling parameter

Summary The dielectric behaviour through DETA system has been studied for six PVC samples of distinct molecular microstructure in terms of content and associated surroundings and conformation of the local configurations mmr termini of isotactic sequences. Both the dielectric studies and the microstructure of the samples, as obtained by stereospecific substitution reaction of an additive-free commercial PVC are to be published in detail separately. For purposes of clarity some of the results are mentioned in Experimental section. The phenomenological correlation between the β parameter as defined by Ngai's theory and the microstructure of the samples, quantities both issued from the above quoted work, is considered in the present paper with the objective of providing some novel ideas on the physical meaning, at molecular level, of the Ngai's coupling parameter, in the light of mobility constraints and local free volume associated with mmr structure at its likely conformations. Received: 16 March 2001/Revised version: 18 June 2001/Accepted: 24 July 2001     

Short Crack R-Curves in Ferroelectric and Electrostrictive PLZT

This work describes the measurement of R -curve behavior in ferroelectric ceramics using four-point bend specimens with controlled semielliptical surface cracks. The results are compared for two compositions of lead lanthanum zirconate titanate. One exhibits ferroelastic behavior, the other electrostrictive linear elastic behavior. R -curves are measured in the crack length regime of 0.1 to 0.8 mm. The ferroelastic composition displays a toughness increase from 0.5 to 1.2 MPa·m^1/2. The linear elastic composition displays a flat R -curve. The R -curve behavior is attributed to ferroelastic toughening.     

Processing and Mechanical Properties of Al2O3/Ni3Al Composites with Interpenetrating Network Microstructure

Composites with microstructures of interpenetrating networks were manufactured by gas pressure infiltration of Ni₃Al into porous preforms of aluminum oxide. Composites with Ni₃Al contents of between 15% and 30% by volume were made and evaluated mechanically at temperatures between room temperature and 1000°C. The fracture strength, the fracture toughness, Young's modulus, and the thermal expansion coefficient were measured for each composite and test condition and were correlated with the microstructures of the composites. Composites with low Ni₃Al contents had strengths below 400 MPa, presumably due to microcracking along the interface between the Ni₃Al and the Al₂O₃. The composite with the highest content of Ni₃Al, 30 vol%, had a mean fracture strength of 675 ± 16 MPa, a Weibull modulus of 23.9, and a room-temperature toughness of 9.2 ± 0.5 MPa·m^1/2.