Ti-13at.-％Ni-37at.-％Pd记忆合金预形变与高温形状记忆效应SCIEI

本文着重地研究了Ti-13at.-％Ni-37at.-％Pd合金的高温形状记忆效应与预形变温度的关系.该合金A_s温度是620K,具有单程形状记忆效应和双程形状记忆效应。在620—640K温度预形变,可以得到最大的形状记忆应变,这与在此温区产生的最小可逆应变能有关。     

B和C对铸造TiAl基合金宏观和显微组织的影响

对比研究了B和C含量的变化对铸造TiAl基合金宏观和显微组织的影响。结果表明 ，B或C含量的增加均能细化TiAl基合金的晶粒，但二者的作用特点不同。B含量对宏观组织和晶粒尺寸的影响是渐进的，而C对其影响存在一个临界含量。显微观察表明，微量的B就能使合金析出TiB2，随着合金中B含量的增加，硼化物颗粒呈不同的形貌。对于含C合金，当C含量低于临界含量时，在光学尺度上观察不到碳化物相，而当C含量高于临界含量时，合金中生成大量的Ti2AlC碳化物颗粒。讨论了B和C细化TiAl基合金的机制。     

铸铁孕育处理时的石墨核心研究

将铁水用75FeSi孕育后液淬,终止其溶解过程,在溶解区中出现已经生长石墨相的非金属夹杂物,它们随后又溶回铁水中去.但已经复盖有石墨相的晶核能存在较长的时间孕育剂的作用是提供一个碳的过冷溶液,使位于其中的非金属夹杂物活化成为晶核     

RELATIONSHIP BETWEEN CREEP PROPERTIES AND STRUCTURE OF STEEL 20Cr11MoVNbNB

Studies were made of the creep properties and structure change of steet 20Cr11MoVNbNB at550-650℃.It is found that at 550℃ when creep stress>180 MPa there exists linear rela-tion with two different slopes β_1 and β-2 between transitional creep strain ε_β and creeptime t~(1/3),and β_1(in initiol period)>β_2(in later period).The Creep rate of stable stage at550℃ can be expressed by =Aσ exp(-Q_ /RT),where,n=4.7.A exp(-Q_ /RT)=5.37×10~(-16).Apparent creep activation energy Q_ =430 kJ/mol at 550-650℃,which ismuch higher than the self-diffusion activation energy of atoms for matrix Fe.In creepprocess,as the creep stress and time increase,the total weight of precipitated phases and rela-tive weight of Cr,Mo and V increase,but those of Fe and Nb decrease in precipitated phases,     

快速凝固Al-Li合金超塑性的研究

制备了急冷微晶铝锂合金并对其超塑性进行了研究。热机械处理使快凝铝锂合金获得超塑性。固溶+过时效+温轧+再结晶预处理的铝锂合金最大延伸率为585％,最佳超塑变形条件是:温度540℃,应变速率1.67×10~(-2)s~(-1)。观察分析了预处理中的组织变化和超塑变形中的空洞。超塑断裂主要因为空洞形成、长大、绕晶粒联接所致。     

APPLICATION OF d-ELECTRON ALLOY DESIGN THEORY TO DEVELOPMENT OF HOT CORROSION RESISTANT Ni-BASE SINGLE CRYSTAL SUPERALLOYS——Ⅰ Characterization of Phase Stability

为应用d-电子合金设计理论(或新相分计算法(New PHACOMP))设计发展新型抗热腐蚀单晶高温合金,首先对高Cr抗热腐蚀IN738LC系列合金Ni—16Cr—9.5Al—4.0Ti-8.0Co—0.55Nb—0.06Zr—0.05B—0.47C-Ta—W—Mo(at-％)的相稳定性进行了综合评价得出抑制σ相析出的稳定性临界条件为Mdt<0.991或Mdγ<0.93同时证明这两个临界电子参数具有等价性,可以用Mdt代替Mdγ简化合金设计过程.这一结果可适用于其它高Cr系列抗热腐蚀镍基合金的d-电子合金设计     

LY12铝合金摩擦焊接过程的电场效应

定量研究了外加强电场对LY12铝合金摩擦焊接头热影响区（HFZ）中动态再结晶区宽度与晶粒尺寸的影响，并初步探讨了其影响机制。实验结果表明，外加强电场使动态再结晶区晶粒细化、等轴性提高，超细等轴晶区亦加宽。此外，采用较高焊接压力时，电场的引入使焊接接头的动态再结晶区宽度增大10％－30％；采用中等摩擦压力施焊时，电场的作用不但使焊接接头动态再结晶区宽度明显增加，而且还影响其沿径向的分布形态，使近轴心线处的动态再结晶区宽度趋于均匀，可以推断，外加强电场可使摩擦焊接头更易发生动态再结晶，而且强电场使焊合区组织的细化与均匀化，有利于提高焊接接头性能。     

Connecting the Empire: New Research Perspectives on Infrastructures and the Environment in the (Post)Colonial World

In the academic debate on infrastructures in the Global South, there is a broad consensus that (post)colonial legacies present a major challenge for a transition towards more inclusive, sustainable and adapted modes of providing services. Yet, relatively little is known about the emergence and evolution of infrastructures in former colonies. Until a decade ago, most historical studies followed Daniel Headrick’s (1981) “tools of empire” thesis, painting—with broad brush strokes—a picture of infrastructures as instruments for advancing the colonial project of exploitation and subordination of non-European peoples and environments. This paper explores new research perspectives beyond this straightforward, ‘diffusionist’ perspective on technology transfer. In order to do so, it presents and discusses more recent studies which focus on interactive transfer processes as well as mechanisms of appropriation, and which increasingly combine approaches from imperial history, environmental history, and history of technology.There is much to gain from unpacking the changing motives and ideologies behind technology transfer; tracing the often contested and negotiated flows of ideas, technologies and knowledge within multilayered global networks; investigating the manifold ways in which infrastructures reflected and (re)produced colonial spaces and identities; critically reflecting on the utility of large (socio)technical systems (LTS) for the Global South; and approaching infrastructures in the (post)colonial world through entangled histories of technology and the environment. Following David Arnold’s (2005) plea for a “more interactive, culturally-nuanced, multi-sited debate” on technology in the non-Western world, the paper offers fresh insights for a broader debate about how infrastructures work within specific parameters of time, place and culture.     

Nonlinearity of bituminous mixtures

This paper presents an experimental characterization of the strain dependency of the complex modulus of bituminous mixtures for strain amplitude levels lower than about \(110~\upmu\mbox{m}/\mbox{m}\). A series of strain amplitude sweep tests are performed at different temperatures (8, 10, 12 and 14°C) and frequencies (0.3, 1, 3 and 10 Hz), during which complex modulus is monitored. For each combination of temperature and frequency, four maximum strain amplitudes are targeted (50, 75, 100 and \(110~\upmu\mbox{m}/\mbox{m}\)). For each of them, two series of 50 loading cycles are applied, respectively at decreasing and increasing strain amplitudes. Before each decreasing strain sweep and after each increasing strain sweep, 5 cycles are performed at constant maximum targeted strain amplitude.Experimental results show that the behavior of the studied material is strain dependent. The norm of the complex modulus decreases and phase angle increases with strain amplitude. Results are presented in Black and Cole–Cole plots, where characteristic directions of nonlinearity can be identified. Both the effects of nonlinearity in terms of the complex modulus variation and of the direction of nonlinearity in Black space seem to validate the time–temperature superposition principle with the same shift factors as for linear viscoelasticity.The comparison between results obtained during increasing and decreasing strain sweeps suggests the existence of another phenomenon occurring during cyclic loading, which appears to systematically induce a decrease of the norm of the complex modulus and an increase of the phase angle, regardless of the type of the strain sweep (increasing or decreasing).     

Thermal motions in bacteriorhodopsin at different hydration levels studied by neutron scattering: correlation with kinetics and light-induced conformational changes

Bacteriorhodopsin (BR) is a transmembrane protein in the purple membrane (PM) of Halobacterium salinarum. Its function as a light-driven proton pump is associated with a cycle of photointermediates which is strongly hydration-dependent. Using energy-resolved neutron scattering, we analyzed the thermal motions (in the nanosecond-to-picosecond time range) in PM at different hydration levels. Two main populations of motions were found that responded differently to water binding. Striking correlations appeared between these "fast" motions and the "slower" kinetic constants (in the millisecond time range) of relaxations and conformational changes occurring during the photocycle.