Intrinsically Ductile Failure in a Nanocrystalline Beta Titanium Alloy

A nanocrystalline bcc Ti_67.4Nb_24.6Zr₅Sn₃ alloy is shown to fracture in an intrinsically ductile manner with exceptionally large dimples (up to 10 µm) which are two orders of magnitude greater than the grain size (≈ 40 nm). This large plasticity length scale is attributed to a combination of low shear modulus (≈ 27 GPa), high Poisson's ratio (≈ 0.4) and ultrahigh strength (UTS ≈ 1.1 GPa), close to the ideal shear stress, which facilitates ideal shear deformation to promote transgranular shear.     

Nonreversible homoclinic snaking

Homoclinic snaking refers to the sinusoidal ‘snaking’ continuation curve of homoclinic orbits near a heteroclinic cycle connecting an equilibrium E and a periodic orbit P. Along this curve the homoclinic orbit performs more windings about the periodic orbit. Typically, this behaviour appears in reversible Hamiltonian systems. Here we discuss this phenomenon in systems without any particular structure. We give a rigorous analytical verification of homoclinic snaking under certain assumptions on the behaviour of the stable and unstable manifolds of E and P. We show how the snaking behaviour depends on the signs of the Floquet multipliers of P. Further we present a nonsnaking scenario. Finally, we show numerically that these assumptions are fulfilled in a model equation.     

Interdiffusion in Fe/Pt Multilayers: In Situ High Temperature Synchrotron Radiation Reflectivity Study

Thermal annealing of Fe/Pt multilayers (ML) is reported to reduce significantly the formation temperature of FePt hard magnetic thin films. The transformation mechanisms of [Fe 1.38 nm/Pt 2.24 nm]₅₀ ML, prepared by magnetron sputtering, is investigated in the present communication by high temperature X‐ray reflectivity using synchrotron radiation. Complete degradation of the ML periodic structure is observed at about 610 K. The variation with annealing temperature of the intensity of the first Bragg peak, the correlated vertical roughness, and the lateral correlation length of the ML show that the ML transform in two stages with a cross‐over temperature of about 515 ± 15 K. This behavior cannot be simply explained by the change in the measured interdiffusion coefficient below and above the cross‐over temperature, suggesting the formation of FePt nanograins along the interfaces.     

Sensitivity of photon-counting based K-edge imaging in X-ray computed tomography

The feasibility of K-edge imaging using energy-resolved, photon-counting transmission measurements in X-ray computed tomography (CT) has been demonstrated by simulations and experiments. The method is based on probing the discontinuities of the attenuation coefficient of heavy elements above and below the K-edge energy by using energy-sensitive, photon counting X-ray detectors. In this paper, we investigate the dependence of the sensitivity of K-edge imaging on the atomic number Z of the contrast material, on the object diameter D , on the spectral response of the X-ray detector and on the X-ray tube voltage. We assume a photon-counting detector equipped with six adjustable energy thresholds. Physical effects leading to a degradation of the energy resolution of the detector are taken into account using the concept of a spectral response function R(E,U) for which we assume four different models. As a validation of our analytical considerations and in order to investigate the influence of elliptically shaped phantoms, we provide CT simulations of an anthropomorphic Forbild-Abdomen phantom containing a gold-contrast agent. The dependence on the values of the energy thresholds is taken into account by optimizing the achievable signal-to-noise ratios (SNR) with respect to the threshold values. We find that for a given X-ray spectrum and object size the SNR in the heavy element's basis material image peaks for a certain atomic number Z. The dependence of the SNR in the high- Z basis-material image on the object diameter is the natural, exponential decrease with particularly deteriorating effects in the case where the attenuation from the object itself causes a total signal loss below the K-edge. The influence of the energy-response of the detector is very important. We observed that the optimal SNR values obtained with an ideal detector and with a CdTe pixel detector whose response, showing significant tailing, has been determined at a synchrotron differ by factors of about two to three. The potentially very important impact of scattered X-ray radiation and pulse pile-up occurring at high photon rates on the sensitivity of the technique is qualitatively discussed.     

Disentangling the adult attention-deficit hyperactivity disorder endophenotype: Parametric measurement of attention.

Attention deficit hyperactivity disorder (ADHD) persists frequently into adulthood. The decomposition of endophenotypes by means of experimental neuro-cognitive assessment has the potential to improve diagnostic assessment, evaluation of treatment response, and disentanglement of genetic and environmental influences. We assessed four parameters of attentional capacity and selectivity derived from simple psychophysical tasks (verbal report of briefly presented letter displays) and based on a “theory of visual attention.” These parameters are mathematically independent, quantitative measures, and previous studies have shown that they are highly sensitive for subtle attention deficits. Potential reductions of attentional capacity, that is, of perceptual processing speed and working memory storage capacity, were assessed with a whole report paradigm. Furthermore, possible pathologies of attentional selectivity, that is, selection of task-relevant information and bias in the spatial distribution of attention, were measured with a partial report paradigm. A group of 30 unmedicated adult ADHD patients and a group of 30 demographically matched healthy controls were tested. ADHD patients showed significant reductions of working memory storage capacity of a moderate to large effect size. Perceptual processing speed, task-based, and spatial selection were unaffected. The results imply a working memory deficit as an important source of behavioral impairments. The theory of visual attention parameter working memory storage capacity might constitute a quantifiable and testable endophenotype of ADHD. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Alternative electro-chemically based processing routes for joining of plasma facing components

Tungsten is considered in fusion technology as functional and structural material in the area of blanket and divertor for future application in DEMO. The KIT design of a He-cooled divertor includes joints between W and W-alloys as well as of W with Eurofer-steel. The main challenges range from expansion mismatch problem for tungsten/steel joints over metallurgical reactions with brittle phase formation to crack stopping ability and excellent surface wetting. These requirements were only met partly and insufficiently in the past e.g. by direct Cu-casting of tungsten onto steel.Both, the joining needs and the observed failure scenarios of conventionally joined components initiated the development of improved joining technologies based on electro-chemical processing routes. As electrolytes aqueous and aprotic, water free, system are integrated into this development line. In the first step principle requirements are presented to guarantee a reproducible and adherent deposition of scales based on Ni and Cu acting as inter layers and filler, respectively, to generate a real metallurgical bonding as demonstrate by 1100 °C joining tests. The development field aprotic systems based on ionic liquids is discussed with respect to enable development of refractory metal based fillers with focus high temperature W–W brazing.     

Aging-induced changes in microstructure and water distribution in fresh and cooked pork in relation to water-holding capacity and cooking loss - A combined confocal laser scanning microscopy (CLSM) and low-field nuclear magnetic resonance relaxation study

Confocal laser scanning microscopy (CLSM) and low-field nuclear magnetic resonance (LF-NMR) relaxometry were combined to characterize microstructural changes and water distribution in fresh and cooked pork during an aging period of 14 days. At day 1 (24 h postmortem) a few muscle fibres, which appear swollen, were observed in both fresh and cooked meat. An identical microstructure was still apparent after 14 days, however, the number of muscle fibres showing distinguished characteristics was found to increase throughout the aging period. Hence, it was apparent that during aging the individual fibres swell and disintegrate at different rates. Development in water-holding capacity (WHC) was followed during the aging period using gravimetric methods, and an increase in the WHC in the fresh meat was observed, which resembled the amount of extramyofibrillar water measured by NMR relaxometry (T₂₂ population). This was consistent with the CLSM images, as a substantial increase in the number of myofibrils that appeared swollen, capable of holding more water, was observed during aging. In the cooked meat the width of the T_21c population, reflecting the myofibrillar water in the cooked meat, was seen to decrease during the entire storage period, which corresponds to the development of a more homogeneous structure. In the CLSM data a continuous degradation during the storage period was observed, which could resemble a shift to a more homogeneous structure. Comparison of CLSM of transverse sections of fresh and cooked pork revealed a pronounced shrinkage of muscle fibres upon cooking. This resulted in large gaps between the cooked muscle fibres, which also was visible as shrinkage at the level of the individual myofibrils. This pattern was also reflected in the NMR relaxation data. The cooking-induced shrinkage of the myofibrils occurred concomitantly with a decrease in the amount of intermyofibrillar water within the individual fibre and an increase in the larger extramyofibrillar spaces between fibres, i.e. water is expelled from the myofibrillar matrix upon cooking. Accordingly, the present study demonstrated that the use of CLSM together with NMR relaxometry can provide further information on the relationship between structural characteristics of meat and resultant water distribution.     

Visualization of immune cell infiltration in experimental viral myocarditis by 19F MRI in vivo

Objective

This paper introduces a new approach permitting for the first time a specific, non-invasive diagnosis of myocarditis by visualizing the infiltration of immune cells into the myocardium.

Materials and methods

The feasibility of this approach is shown in a murine model of viral myocarditis. Our study uses biochemically inert perfluorocarbons (PFCs) known to be taken up by circulating monocytes/macrophages after intravenous injection.

Results

In vivo ¹⁹F MRI at 9.4 T demonstrated that PFC-loaded immune cells infiltrate into inflamed myocardial areas. Because of the lack of any fluorine background in the body, detected ¹⁹F signals of PFCs are highly specific as confirmed ex vivo by flow cytometry and histology.

Conclusion

Since PFCs are a family of compounds previously used clinically as blood substitutes, the technique described in our paper holds the potential as a new imaging modality for the diagnosis of myocarditis in man.     

Chemical investigations on boiling process waters in face veneer production

Boiling processes in veneer industry generate large amounts of process water replete with dissolved wood extractives. In the present study the chemical composition of boiling waters from 18 industrially treated wood species were investigated. Contamination levels of the boiling waters varied within a wide range depending on the different extractive contents of the processed wood species and operational conditions. Boiling wood species with high extractives content, heated over several days at temperatures above 80 °C, generate highly loaded waste waters with chemical oxygen demands (CODs) of up to 7000  mg l^-1. The determination of the elemental composition, using optical emission spectrometry (ICP-OES), showed iron contents of up to 10 mg l^-1. Phenolic compounds were in a range of 40 to 900 mg l^-1. Flavonoid compounds and phenolic acids were identified in the boiling waters by liquid chromatography (RP-HPLC-UV). The results confirm the need for water treatment facilities to establish a recycling process and to avoid discolourations of the wood by accumulated wood extractives.