Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Recent challenges of hydrogen storage technologies for fuel cell vehicles

Fuel cell vehicles have a high potential to reduce both energy consumption and carbon dioxide emissions. However, due to the low density, hydrogen gas limits the amount of hydrogen stored on board. This restriction also prevents wide penetration of fuel cells. Hydrogen storage is the key technology towards the hydrogen society. Currently high-pressure tanks and liquid hydrogen tanks are used for road tests, but both technologies do not meet all the requirements of future fuel cell vehicles. This paper briefly explains the current status of conventional technologies (simple containment) such as high-pressure tank systems and cryogenic storage. Another method, hydrogen-absorbing alloy has been long investigated but it has several difficulties for the vehicle applications such as low temperature discharge characteristics and quick charge capability due to its reaction heat. We tested a new idea of combining metal hydride and high pressure. It will solve some difficulties and improve performance such as gravimetric density. This paper describes the latest material and system development.     

Examination of pin-by-pin fission rate distribution in large geometry evaluated by the Monte-Carlo method

Accuracy and reliability of pin-by-pin fission rate distribution in large geometries calculated by the multi-group Monte-Carlo method is examined through comparison with a deterministic transport code based on the method of characteristics. Various calculation geometries from a single assembly to a PWR full core are used for comparison of pin-by-pin fission rate distribution. An integral parameter, i.e., k-effective, can be accurately calculated by the Monte-Carlo method with a practical number of neutron histories (10⁶–10⁷) regardless of the size of the calculation geometry. On the other hand, comparison with the deterministic calculation shows that the estimated statistical errors for pin-by-pin fission rate distribution obtained by a Monte-Carlo calculation are somewhat underestimated in a large geometry, e.g., a PWR full core, under the present calculation conditions. Such underestimation of the statistical uncertainty of a local parameter should be carefully considered when the Monte-Carlo method is used as a reference tool for verification of a deterministic code, especially in large geometries.     

Multifunctional Hydrophobized Microparticles for Accelerated Wound Healing after Endoscopic Submucosal Dissection

Endoscopic submucosal dissection (ESD) provides strong therapeutic benefits for early gastrointestinal cancer as a minimally invasive treatment. However, there is currently no reliable treatment to prevent scar contracture resulting from ESD which may lead to cicatricial stricture. Herein, a multifunctional colloidal wound dressing to promote tissue regeneration after ESD is demonstrated. This sprayable wound dressing, composed of hydrophobized microparticles, exhibits the multifunctionality necessary for wound healing including tissue adhesiveness, blood coagulation, re‐epithelialization, angiogenesis, and controlled inflammation based on hydrophobic interaction with biological systems. An in vivo feasibility study using swine gastric ESD models reveals that this colloidal wound dressing suppresses fibrosis and accelerates wound healing. Multifunctional colloidal and sprayable wound dressings have an enormous therapeutic potential for use in a wide range of biomedical applications including accelerated wound healing after ESD, prevention of perforation, and the treatment of inflammatory diseases.     

Mutants of the nematode Caenorhabditis elegans that are defective specifically in their attraction to cycloheximide

The nematode Caenorhabditis elegans exhibits chemotaxis toward a wide variety of chemicals including water-soluble molecules and volatile organic compounds. We have previously discovered that C. elegans wild-type strain N2 is strongly attracted by cycloheximide which has long been known as a bitter tastant for humans and other mammals. We describe here the isolation and initial characterization of the first mutants which were defective specifically in their attraction to cycloheximide. In our screenings, we selected two mutants that were defective in chemotaxis to cycloheximide but normal in their attraction to NH4Cl and histidine. These mutants also avoided quinine hydrochloride, CuSO4 and high concentrations of NaCl similar to the wild-type strain N2. Furthermore, no observable defect was detected in their attraction to volatile odorants such as isoamyl alcohol and diacetyl. Dye-filling experiments suggested that they have no morphological defect in the sensory endings of the amphid neurons.     

A novel gene delivery system in plants with calcium alginate micro-beads

We have produced micrometer-sized calcium alginate beads referred to as "bio-beads" that encapsulate plasmid DNA molecules carrying a reporter gene. In order to evaluate the efficiency of the bio-beads in mediating genetic transfection, protoplasts isolated from cultured tobacco cells (BY-2) were transfected with bio-beads containing a plasmid that carries the modified green fluorescent protein gene CaMV35S-sGFP. With the bio-beads treatment, approximately ten-fold higher GFP expression was observed after 24 h incubation compared to that with the conventional method using a naked plasmid solution. Transfection was up to 0.22% efficient. These results indicate that bio-beads have a possibility for efficient transformation in plants.     

Friction factor correlation and pressure loss of single-phase flow inside herringbone microfin tubes

Pressure drop of single-phase turbulent flow inside herringbone microfin tubes of different fin dimensions has been measured experimentally to develop a general correlation of single-phase friction factor for the herringbone tubes. Water has been used as a working fluid and the mass flow rate has been varied from 0.03 to 0.2 kg/s, where the Reynolds number range is 10⁴ to 6.5 × 10⁴. Comparison of experimental data of the herringbone microfin tubes with those of helical microfin and smooth tubes shows that pressure drop of the herringbone tube is significantly higher than the helical and smooth tubes depending on the fin geometric parameters and mass velocity of the working fluid. Through semi-analytical approach and using the present experimental data, a new correlation of single-phase friction factor for the herringbone microfin tubes has been proposed incorporating the effects of fin geometric parameters. The proposed correlation can predict the experimental data within ±10%.     

Applicability of GC, GC/MS and liquid chromatography with tandem mass spectrometry to screening for 140 pesticides in agricultural products

The applicability of GC, GC/MS and liquid chromatography with tandem mass spectrometry (LC/MS/MS) to screening for 140 pesticides in agricultural products was examined. Validation of multi-residue screening methods for the determination of 88 pesticides in 12 crops (asparagus, cauliflower, burdock, carrot, broccoli, spinach, matsutake mushroom, orange, soybean, sesame, millet and tea) was done by GC and GC/MS. Of the 88 pesticides, 63 were obtained with recoveries in the range from 50 to 150% at the 0.1 microg/g level in the 12 crops. Applicability of the official methods in Japan to 74 pesticides, including 22 pesticides with low recovery (< 50%) by GC or GC/MS analysis, was also examined by LC/MS/MS. LC/MS/MS acquisition parameters were established for 67 pesticides in positive and negative electrospray ionization (ESI) modes. Of 67 pesticides validated in 7 crops using LC/MS/MS at the 0.1 microg/g level, 44 showed recoveries in the range from 50 to 150%. The occurrence of matrix interference in LC/MS/MS can lead to false-positive detection of MCPA in spinach, cabbage and orange and false-negative detection of four pesticides in orange, spinach, apple and unpolished rice. Good linearity was observed in the studied ranges by GC, GC/MS (r > 0.990) and LC/MS/MS (r > 0.995). Of the total of 140 pesticides validated by GC, GC/MS and LC/MS/MS, 107 were newly recognized as suitable subjects for screening.     

In vivo fluoride profiles at different sites of buccal and lingual enamel surfaces obtained by enamel biopsy of human maxillary first permanent molars in young adults

Twenty male volunteers, average age 24 years, participated in this study. Specimens were obtained by enamel biopsy using 5 microliters of 0.5 M HClO4 for 30 s. Using a regression curve, comparisons of fluoride concentrations were made at different depths. The fluoride concentrations (mean +/- SE) at a depth of 5 microns were highest in the distobuccal (1698 +/- 136), high in the mesiobuccal (1343 +/- 122), low in the distolingual (1119 +/- 107), and lowest in the mesiolingual sites (819 +/- 78). Of the interior enamels (> or = 10 microns in depth), the distobuccal site (1330 +/- 88 parts/10(6) F at 10 microns) had a higher-concentration than all other sites. The fluoride profiles were steepest to shallowest in the order: distobuccal, mesiobuccal, distolingual and mesiolingual. There were no correlations between the enamel fluoride concentrations and the fluoride concentration in parotid saliva. It was concluded that in vivo fluoride profiles of maxillary first molars reflect the wear of the tooth surface with age and the condition of dental plaque deposition, and, to some extent, the site-specific distribution of saliva between buccal and lingual surfaces.