浅谈P3软件在电力基建工程中的应用

P3软件是一套体现了现代化项目管理理念的项目管理工具，在建设管理上推广应用P3工程管理软件，可以提高各参建单位的工作效率、加快工程信息交流、数据共享和工程进度管理水平，在管理上尽快与国际接轨，本文就P3软件在电力基建工程中的应用做以简单介绍。     

Three schemes of remote information concentration based on ancilla-free phase-covariant telecloning

In this paper, remote information concentration is investigated which is the reverse process of the $1\rightarrow 3$ optimal asymmetric economical phase-covariant telecloning (OAEPCT). The OAEPCT is different from the reverse process of optimal universal telecloning. It is shown that the quantum information via $1\rightarrow 3$ OAEPCT procedure can be remotely concentrated back to a single qubit with a certain probability via several quantum channels. In these schemes, we adopt Bell measurement to measure the joint systems and use projected measurement and positive operator-valued measure to recover the original quantum state. The results shows non-maximally entangled quantum resource can be applied to information concentration.     

一种关于目标罚参数的精确罚函数法

罚函数法是一种将约束优化问题转化为无约束问题的重要方法.对于一般的约束优化问题,通过加入新参数,给出了一种改进的精确罚函数和这种罚函数的精确罚定理证明,提出了求解这种罚函数的算法.实验表明该算法是有效的.     

环形橡胶径向刚度特性仿真分析

利用ANSYS软件建立了环形橡胶的有限元参数化模型,将对模型仿真所得结果与已有数据进行对比,验证了仿真模型的正确性,实现了环形橡胶径向刚度的快速计算.在此基础上,分析了内外圆柱面半径与轴向长度对环形橡胶简化径向刚度值的影响,研究了环形橡胶的径向刚度特性,确立了在环形橡胶实际设计中需要考虑的要点,为环形橡胶的设计提供了依据.     

国内外聚乙烯醇工业的进展及市场展望

简述了国内外聚乙烯醇工业情况，介绍了聚乙烯醇及其衍生物的应用领域，展望了聚乙烯醇的发展形势和市场状况。     

一种基于分段偏最小二乘模型的土壤重金属遥感反演方法

土壤中重金属由于其毒性而成为最有害的环境污染物之一,利用遥感进行土壤重金属检测和分布制图是目前最为高效的手段。采用哨兵二号（Sentinel-2）多光谱影像与实测样品光谱数据,对山西省铜矿峪铜矿尾矿库及其周边农田土壤的铜（Cu）含量进行估算,利用68个土壤样品的反射光谱,优选出适合土壤铜含量预测的波段,结合分段偏最小二乘法（Piecewise Partial Least Squares Regression,P-PLSR）,对土壤铜含量进行估算,将模型用于Sentinel-2影像获得了Cu含量的空间分布。通过P-PLSR对实测样品光谱建模反演Cu含量的决定系数（R²）为0.89,预测偏差比（RPD）为2.82;利用Sentinel-2多光谱影像获得了该区域Cu元素含量空间分布,其Cu含量的估算精度R²为0.74,RPD为1.73,Cu含量高值区空间分布与尾矿库关系密切。Sentinel-2多光谱数据具有高空间分辨率（10、20和60 m）、高时间分辨率和幅宽大（290 km）等优势,通过敏感波段选择并建立反演模型,可实现大范围土壤环境制图。     

LogGAN: a Log-level Generative Adversarial Network for Anomaly Detection using Permutation Event Modeling

Information Systems Frontiers - System logs that trace system states and record valuable events comprise a significant component of any computer system in our daily life. Each log contains...     

Scheme for implementing multitarget qubit controlled-NOT gate of photons and controlled-phase gate of electron spins via quantum dot-microcavity coupled system

We propose a deterministic scheme to implement the multiqubit controlled-NOT gate of photons and multiqubit controlled-phase gate of electron spins with one control qubit and multiple target qubits using quantum dots in double-sided optical cavities. The scheme is based on spin selective photon reflection from the cavity and can be achieved in a nondestructive way. We assess the feasibility of the scheme and show that the gates can be implemented with high average fidelities by choosing the realistic system parameters appropriately. The scheme is useful in quantum information processing such as entanglement preparation, quantum error correction, and quantum algorithms.     

Recent advances and future challenges for massive MIMO channel measurements and models大规模多输入多输出通信系统的信道测量与建模的最新进展及未来挑战

This paper considers a unicast multiuser multiple-input single-output (MISO) downlink system overheard by multiple single-antenna eavesdroppers. The objective is to jointly design the beamforming vectors and the artificial noise (AN) covariance matrix with imperfect channel state information (CSI) at the transmitter, such that the total transmit power is minimized while satisfying probabilistic quality of service (QoS) constraints at legitimate users and the eavesdroppers. Using Bernstein-type inequalities and the S-procedure, we recast the non-convex power minimization problem as two different convex semidefinite programs (SDPs) which can be solved using interior-point methods. Simulation results show that the proposed methods outperform a nonrobust method and the ones using the isotropic AN.     

A Two-Stage Approach for Network Monitoring

A goal of network tomography is to infer the status (e.g. delay) of congested links internal to a network, through end-to-end measurements at boundary nodes (end-hosts) via insertion of probe signals. Because (a) probing constitutes traffic overhead, and (b) in any typical scenario, the number of congested links is a small fraction of the total number in the network, a desirable design objective is to identify those (few) congested links using a minimum number of probes. In this paper, we make a contribution to solving this problem, by proposing a new two-stage approach for this problem. First, we develop a binary observation model linking end-to-end observations with individual link statuses and derive necessary and sufficient conditions for whether at least one link in the network is congested. Stage I of the proposed method shows that achieving 1-identifiability with a minimum number of probes is equivalent to the familiar minimum set covering problem that can be efficiently solved via a greedy heuristic. A sequential algorithm is described, leading to a significantly lowered computational complexity vis-a-vis a batch algorithm. Next, a binary splitting algorithm originally developed in group testing is used to identify the location of the congested links. The proposed scheme is evaluated by simulations in OPNET and experiments on the PlanetLab testbed to validate the advantages of our 2-stage approach vis-a-vis a conventional (batch) algorithm.