Effect of Additives on Magnetic Properties of High Frequency MnZn Power Ferrite

In keeping with the advance of more compact and more power-saving electronic equipment, the demand is increasing for smaller and more efficient switching power supply. Therefore, it is necessary to provide the adequate magnetic power ferrite materials to satisfy the demand. Such ferrite materials have to meet the following main requirement: 1) high initial permeability (μ i ); 2) high saturation magnetic induction (Bs); 3) high Curie temperature (Tc); 4) high electrical resistivity (ρ ); 5)…     

拳王阿里

该片根据拳王阿里的故事改编而成。编导在影片中不但在努力塑造这位世界三大拳击组织的金腰带获得者，而且还塑造成了一个另类英雄。从更深的层面上看，正是因为阿里的传奇经历早已超越了一个体育明星的影响力。作为社会活动家与慈善大使，对发展中国家进行人道主义救援成为了这位拳王生活中极为重要的内容。他对他这一代人以及后来的几代人的影响为世人所公认。     

利用催化加氢热解技术提取沉积 有机质中生物标志化合物

利用催化加氢热解技术提取了高演化沉积有机质中共价键结合的生物标志化合物,探讨了干酪根催化加氢热解反应机理,并考察了反应产物分布和影响反应的关键变量.实验表明,程序升温固定床催化加氢热解反应条件:温度上限为520℃,升温速率为5℃/min,氢压大于10MPa,氢气流量为5L/min,分散型催化剂为MoS₂(Mo的质量分数为1%).实验结果表明,催化加氢热解对提取高产率、结构重排少的干酪根中共价键结合的生物标志化合物有独特作用,该方法可以应用于有机地球化学领域.     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

矿山抗采动农村楼房的试验研究

本文通过两栋不同加固方案的二层农村楼房抗采动现场试验结果的分析,对不同加固措施的作用机理、效果及其设置条件进行了研究探讨,并提出,在农村采动区兴建抗采动变形楼房,是解放村庄下压煤、节约耕地和降低加固费用的途径。     

Radiation of millimeter waves from NRD leaky wave antennas withtapered transition and tuning aperture

The radiation of millimeter waves from the nonradiative dielectric (NRD) leaky wave antennas with the tapered transition and the tuning aperture is investigated. An accurate theory for the leakage constant and the phase constant of the antennas is presented, which is based on the generalized scattering parameters considering the higher-order mode interactions at the discontinuities. The associated transverse equivalent network involves the characterization of the mode couplings at two air-to-dielectric interfaces, the coupled mode analysis of the tapered transition, and the calculation of the radiation fields at the tuning aperture via the extended spectral domain approach. The interesting behavior of the present modified configuration of NRD leaky wave antennas is illustrated by typical examples. The validity of the theory is confirmed by the comparison of the theoretical results with experimental data for the limiting cases     

Network model approach for calculating oscillating frequency of thermoacoustic prime mover

The network model is given and used to calculate the oscillating frequency of thermoacoustic prime mover. Theoretically calculated frequency by the model is plural, whose real part denotes actual frequency of the system, and imaginary part means attenuation coefficient of acoustic pressure. Numerical calculation is made under different conditions including different acoustic cavities, spacing between each parallel plate, gas pressures and system lengths. Theoretically calculated frequency and experimentally measured frequency are in quite good agreement.     

结构化P2P网络中基于流言传播的负载均衡

提出了结构化P2P网络中利用结点间周期性的拓扑维护通信来夹带、传播消息进行负载均衡的方法，具体针对Chord系统从消息传播的速度和规模两个方面分析了该方法的性能，并利用仿真进行了验证。讨论了结论在其它形式网络中的推广和实现中的消息管理问题。     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .