Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

脂肪族聚酯熔点的预估——对D．W．Vankrevelen经验公式的修正

对D．W．Vankrevelen经验公式进行了修正,并对脂肪族聚酯的熔点进行了计算。结果表明,修正后的公式比原公式准确性星著提高,可对脂肪族聚酯熔点进行预估。     

鹽酸氟桂利嗪有关物质测定方法的研究

在Balestrion·F.,Jirillo·R. 等人的研究及卫生部部颁标准在基础上,对盐酸氟桂利嗪的有关物质的测定方法进行了研究,由薄层色谱法改为高效液相色谱法,操作简单易行,分辨率高,重现性好,结果准确可靠。     

A new gear fault feature extraction method based on hybrid time–frequency analysis

Gear is one of the popular and important components in the rotary machinery transmission. Vibration monitoring is the common way to take gear feature extraction and fault diagnosis. The gear vibration signal collected in the running time often reflects the characteristics such as non-Gaussian and nonlinear, which is difficult in time domain or frequency domain analysis. This paper proposed a novel gear fault feature extraction method based on hybrid time–frequency analysis. This method combined the Mexican hat wavelet filter de-noise method and the auto term window method at the first time. This method can not only de-noise noise jamming in raw vibration signal, but also extract gear fault features effectively. The final experimental analysis proved the feasibility and the availability of this new method.     

高分子铁盐絮凝剂制备及其应用研究

研究了以废铁屑和工业硫酸亚铁为原料,在常压和加热条件下,用氯酸钾作为氧化剂制取聚合硫酸铁(PFS)的工艺条件,并在PFS制备的基础上,合成了聚磷硫酸铁(PPFS)和聚氯硫酸铁(PFCS)。将所制备的聚铁用于污水处理实验,结果表明:用该方法制备的聚铁絮凝剂对实际水样具有较好的混凝处理效果,且制备工艺简单、速度快,从根本上消除了用NaNO_2催化氧化法制备聚铁对环境造成的二次污染。     

种子法制备聚合物乳液技术的进展

从建筑乳液的生产现状、自生种子法与外加种子法的区别、种子乳液的特点及外加种子法生产的乳液特性等方面介绍了种子法制备乳液技术的进展。     

玻璃防雾技术的研究进展

本文简单介绍了玻璃表面防雾的几种基本原理,综述了国内外以防雾为目的的玻璃表面改性的研究进展,并对该技术的发展趋势做了论述。     

Mechanical Properties of Porous Materials

Porous materials are commonly found in nature and as industrial materials such as wood, carbon, foams, ceramics and bricks. In order to use them effectively, their mechanical properties must be understood in relation to their micro-structures. This paper studies the mechanical properties of a few common porous materials: carbon rods, ceramics, polymeric foams and bricks. The characterisation of pore structures was performed using a Mercury Porosimeter. Detailed information was obtained on the density, porosity, surface area and pore size distribution. A large number of experiments on either bending or compression were conducted in order to obtain their macro-mechanical properties such as Young's modulus, hardness and strength. Based on the experimental observations, theoretical models were employed to predict the macro-properties from the micromechanics viewpoint. By studying the deformation of pores the global behaviour was calculated. Two simple formulae for the elastic modulus, E, were proposed: for low values of porosity, , E = E⁰(1 – 2) (1 + 4²) where E⁰ is the elastic modulus when the porosity is zero; for high value of porosity such as for foams E = E⁰ (1 – )². The theoretical results agreed well with the experimental ones. The study has provided insights into the mechanical properties of porous materials over a wide range of porosity values.     

无机物——聚醋酸乙烯复合乳液粒子结构及主要性能

本文对均聚醋酸乙烯乳液及其与无机物的混合物,无机物——聚醋酸乙烯复合乳液的粒子结构进行了比较,阐述了复合乳液的主要性能。     

一种支持服务关联的Web服务选择方法

目前存在的大多数基于QoS(quality of service)的Web服务选择方案都忽略了服务之间的关联关系, 认为服务之间是相互独立的, 使得组合服务的结果与实际有所偏差。为了提高组合Web服务QoS的精确性, 考虑到服务之间的关联关系对组合服务质量的影响, 分别对服务之间的接口关联、业务关联和统计关联三种关联关系进行研究, 提出了一种基于关联度的关联服务集合发现方法, 将支持服务关联的选择问题转换为混合整数规划模型进行求解。实验结果表明, 考虑服务之间的关联关系会提高组合Web服务的质量。