水热法制备锰锌铁氧体纳米晶

以水热法制备了粒径为20－40nm的锰锌铁氧体纳米晶，以XRD、SEM、磁强计等对产物做了表征，分析了影响锰锌铁氧体纳米晶的因素。结果表明，在T≥150℃,t≥5h条件下，均能得到阵锌铁氧体纳米晶粉末。T＝450℃时制备的纳米晶的磁强度最高；添加剂能改善水热体系的均匀性，使产物分布均匀、晶相单一、团聚少。     

Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres

Plerospheres, defined here as superfine spherical particles (0.5–5 μm) separated from fly ash (rather than as other solid spherical particles, as some have used the term), are separated from coal fly ash but are dramatically different from it. Plerospheres can be used as polymer fillers to improve the properties of composites. With plerospheres used as fillers for polypropylene (PP) and unplasticized poly(vinyl chloride) (UPVC), the effects of the filler content, the particle sizes of the plerospheres, and the coupling agent on the composite properties were studied. The particle sizes of the plerospheres were 2 and 5 μm. The results suggested that the notched impact properties both at a normal temperature and a low temperature and the tensile and flexural properties of plerosphere/PP increased significantly when the content was increased from 0 to 30 wt % and further increased with the addition of a coupling agent. Differential scanning calorimetry indicated that the thermal properties of the plerosphere/PP composite improved. The surface characteristics and morphology of the impact fracture surface were examined in detail with scanning electron microscopy. The rheological performance of plerosphere/UPVC pipe composites obviously improved; the plasticizing time was shortened, and the maximum torque was reduced. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 126–131, 2004     

可再分散聚合物粉末研究进展

介绍了可再分散聚合物粉末在国内外的应用、制备及作用机理研究现状,说明其存在耐水性能较差及价格偏高等问题,今后应进一步加强耐水性能及作用机理等方面的研究。     

铝管冷凝器强度胀接探讨

按以往经验,在严格控制管板管孔加工精度、换热管质量及胀接过程的基础上,对铝管与不锈钢管板进行强度胀接。在管头渗漏达不到设计要求的情况下,分析了原因,采取了措施,达到了设计要求。     

Coupling Between Magnetic Exchange and Charge Activation in Cu‐Doped LaFeO3

Material research on perovskite‐type oxides (ABO₃) has been driven by the recognition of their unique properties primarily attributed to the presence of oxygen octahedron (BO₆). Since 2003, the discovery of strong coupling in TbMnO₃ and BiFeO₃ has stimulated new interests in understanding the relationship between magnetic and electric properties in perovskites. In this article, we report our recent work on the magnetic superexchange interaction and charge formation in copper‐doped LaFeO₃ using high‐temperature neutron diffraction and thermoelectric measurements. In situ neutron diffraction measurements show a loss of antiferromagnetic ordering above 450°C. With an increase in Cu content, the (Fe, Cu)‐O bond length decreases and the (Fe, Cu)–O–(Fe, Cu) bond angle increases, which leads to an enhancement of the Fe–O–Fe superexchange interaction. Thermoelectric and electrical measurements show that the formation of electron holes in Cu‐doped LaFeO₃ is a thermally activated process with two distinct regions with a transition temperature near 450°C, in congruence with the magnetic measurements. Our work show that Cu is in 3+ state in La(Fe,Cu)O₃ at room temperature, resulting in the maximum superexchange interaction between Fe³⁺ ions.     

Circulating Organ-Specific MicroRNAs Serve as Biomarkers in Organ-Specific Diseases: Implications for Organ Allo- and Xeno-Transplantation

Different cell types possess different miRNA expression profiles, and cell/tissue/organ-specific miRNAs (or profiles) indicate different diseases. Circulating miRNA is either actively secreted by living cells or passively released during cell death. Circulating cell/tissue/organ-specific miRNA may serve as a non-invasive biomarker for allo- or xeno-transplantation to monitor organ survival and immune rejection. In this review, we summarize the proof of concept that circulating organ-specific miRNAs serve as non-invasive biomarkers for a wide spectrum of clinical organ-specific manifestations such as liver-related disease, heart-related disease, kidney-related disease, and lung-related disease. Furthermore, we summarize how circulating organ-specific miRNAs may have advantages over conventional methods for monitoring immune rejection in organ transplantation. Finally, we discuss the implications and challenges of applying miRNA to monitor organ survival and immune rejection in allo- or xeno-transplantation.     

Rapid Prototyping of Piezoelectric Ceramics via Selective Laser Sintering and Gelcasting

This article presents a new lost mold rapid prototyping method which combines selective laser sintering (SLS) and gelcasting techniques for fabricating piezoelectric ceramics. SLS was used to fabricate sacrificial molds of the desired structure of the ceramic part. Then aqueous PZT (lead zirconate titanate) suspension was cast in the mold and solidified in situ through formation of a three-dimensional network gel. Because the polymer mold can be easily removed at the initial stage of sintering and the gelcast PZT body has a high green strength, the desired geometry of the PZT part can be completely retained after sintering of the ceramics. Complex-shaped PZT parts were successfully fabricated after using concentrated PZT suspension with low viscosity. Densities and electrical properties, such as the d ₃₃, the relative permittivity ε, the dielectric loss tg δ and the electromechanical coupling factor K _p of the gelcast PZT parts were also compared with those of the die-pressed PZT samples. The results indicated that the gel-forming process did not deteriorate the electrical properties of the samples, if proper dispersant was selected in developing concentrated ceramic slurry.     

Dielectric Behavior of Na0.5Bi0.5TiO3-Based Composites Incorporating Silver Particles

The dielectric properties of Na_0.5Bi_0.5TiO₃ (NBT) -based composites incorporating silver particles prepared by sintering at a low temperature of ∼900°C are reported. The dielectric constant increases with the amount of metal silver particles in the measured frequency range (150 Hz to 1 MHz), and could be enhanced up to ∼20 times higher than that of pure NBT ceramics, which was ascribed to the effective electric fields developed between the dispersed particles in the matrix and the percolation effect. Further investigation revealed that the dielectric constant of the composites has weak frequency and temperature dependence (−50°C to +50°C).     

In Silico Screening Identifies a Novel Potential PARP1 Inhibitor Targeting Synthetic Lethality in Cancer Treatment

Synthetic lethality describes situations in which defects in two different genes or pathways together result in cell death. This concept has been applied to drug development for cancer treatment, as represented by Poly (ADP-ribose) polymerase (PARPs) inhibitors. In the current study, we performed a computational screening to discover new PARP inhibitors. Among the 11,247 compounds analyzed, one natural product, ZINC67913374, stood out by its superior performance in the simulation analyses. Compared with the FDA approved PARP1 inhibitor, olaparib, our results demonstrated that the ZINC67913374 compound achieved a better grid score (−86.8) and amber score (−51.42). Molecular dynamics simulations suggested that the PARP1-ZINC67913374 complex was more stable than olaparib. The binding free energy for ZINC67913374 was −177.28 kJ/mol while that of olaparib was −159.16 kJ/mol. These results indicated ZINC67913374 bound to PARP1 with a higher affinity, which suggest ZINC67913374 has promising potential for cancer drug development.     

Enhanced mechanical properties of W-doped Nb4AlC3 ceramics

The W-doped Nb₄AlC₃ ceramics [(Nb_1-xW_x)₄AlC₃, x?=?0–0.0375] were successfully fabricated by in-situ reactive hot-press-aided method using elemental niobium, aluminum, graphite and tungsten powders. The XRD results suggest that the matrix phase (Nb_1-xW_x)₄AlC₃ and the second phase (Nb_1-xW_x)C were simultaneously formed when W was added. The SEM images show that (Nb_1-xW_x)C is dispersed in the W-doped Nb₄AlC₃ ceramics matrix. The mechanical properties of Nb₄AlC₃ were greatly enhanced by W doping. Typically, the (Nb_0.975W_0.025)₄AlC₃ exhibits the highest flexural strength (483?±?21?MPa), fracture toughness (8.5?±?0.3?MPa?m^1/2) and Young′s modulus (382?±?18?GPa) at room temperature (RT), which are increased by 59%, 15% and 30%, respectively, compared with the present Nb₄AlC₃. The Vickers hardness of (Nb_0.9625W_0.0375)₄AlC₃ (4.8?±?0.2?GPa) is 92% higher than that of Nb₄AlC₃. The (Nb_0.975W_0.025)₄AlC₃ also retains a high flexural strength of 344?±?4?MPa at 1400?°C (71% of RT value), which is much higher than the RT flexural strength (303?±?22?MPa) of the present Nb₄AlC₃. The strengthening effect is attributed to the solid solution of W and the incorporation of the second phase (Nb_1-xW_x)C. The excellent mechanical properties endow the W-doped Nb₄AlC₃ ceramics as promising high-temperature structural materials.