双时基频率校准电路

提供精确的时间基准是精密仪器和高精度设备计时和工作的关键技术之一。文中采用两套晶振电路，通过分频产生高频和低频两个频率信号，采用编码的方法对两个频率信号在每一个时钟周期内进行动态校核，只有两个晶振的频率在允许的精度范围内，或同时增大（缩小）相同的倍数，校核后频率信号才是正确的，且能给系统提供精确的时间基准。该方法能有效防止系统的时钟周期因意外的原因伸长或缩短。整个电路可以作为精密仪器或高精度设备的一个模块电路。     

Using motion from orthographic views to verify 3-D point matches

The specific problem addressed by the authors is how to detect the true match of a fourth point from among candidate matches in a situation in which three points have already been matched. The two sets of points to be matched are both subject to measurement errors. The depth error is more dominant than errors in the other two coordinates; however, the exact statistical distribution of the measurement errors is not known. The authors present a new method for solving the problem. The method is based on the technique of motion analysis using orthographic views. It discards the noisy z (depth) coordinates and uses only the x and y coordinates of the points to verify the match. The effect of depth errors on the motion estimate is completely prevented. Results show that this method is substantially more effective than previous methods that use all three coordinates     

FCC原料掺入裂解焦油的研究及其机理分析

在催化裂化固定流化床小试装置上，对裂化原料中掺入富含芳烃的添加剂－裂解焦油进行了考察，确定了添加剂的最佳掺入量为1％，与不掺添加剂的裂化原料相比，其汽油产率提高，生焦量和干气产率减少，汽油选择性变好。同时通过对添加剂的原料体系的结构研究，对添加剂影响催化裂化过程的机理进行了探讨。     

舰船水声隐身技术(二)

本文探讨了水声隐身性能对舰船战技术性能的影响 ,舰船水噪声的主要噪声源、水噪声的治理措施及其展望。     

Inertia effects on non-parallel thermal instability of natural convection flow over horizontal and inclined plates in porous media

The inertia effect on the onset of thermal instability in natural convection flow over heated horizontal and inclined flat plates embedded in fluid-saturated porous media is analyzed. The linear non-parallel flow model is employed in the instability analysis, which takes into account the streamwise variation as well as the transverse variation of the disturbance amplitude functions. The set of partial differential equations for the disturbance amplitude functions are converted to a system of homogeneous linear ordinary differential equations with homogeneous boundary conditions by the local non-similarity method. The resulting eigenvalue problem is then solved by an implicit finite-difference method. Representative neutral stability curves and critical Rayleigh numbers are presented. It has been found that as the angle of inclination relative to the horizontal increases, the surface heat transfer rate increases, whereas the flow becomes more stable to the vortex mode of instability. Also, as the inertia effect, expressed in terms of Forchheimer number, Fr, increases, the heat transfer rate decreases, but the flow becomes more stable. It is demonstrated that the non-parallel flow model predicts a more stable flow than the parallel flow model.     

TP130TT高抗挤套管研究与应用

为了提高盐层段固井质量 ,中原油田研究开发了 TP130 TT高抗挤套管 ,性能试验评价表明 ,其抗挤强度超过 16 0 MPa,并给出了其固井质量评价标准。在中原油 346口井中的应用表明 ,该套管有效地解决了盐层段套管损坏问题 ,延长了油气水井寿命 ,经济效益和社会效益显著。     

Parameters evaluation of SOLA algorithm for time scale modification

Successful operation of the Synchronous Overlap and Add (SOLA) algorithm for Time Scale Modification (TSM) of speech is closely tied to the proper choice of parameters. This paper investigates the quality of time scale modified speech under different values of primary parameters. Based on Mean Opinion Score (MOS) tests and Bark Spectral Distortion (BSD) measure, the proper choices of synthesis shift (Ss) and the duration of the shift search interval (K _max?) are given experimentally. The conclusions can be helpful for operating the SOLA algorithm for time scale modification of speech.     

Template-assisted synthesis of lamellar mesostructured hydroxyapatites

Novel lamellar mesostructured hydroxyapatites have firstly been synthesized by template-assisted technique. The mild and nontoxic surfactant, phosphoric acid monododecyl ester (MAP), is used to act as a structure-directing template. The structure of sample was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Scanning electron microscope and Transmission electron microscopy. The results indicate that the obtained sample is a well-organized lamellar mesostructured hydroxyapatite with a uniform layer spacing of 3.64 nm.     

钨合金废料的资源再生利用技术

钨是一种稀有金属，钨合金具有高的强度、硬度，较好的耐高温性、耐密性和良好的电性能。广泛应用于航空航天工业、兵器工业、核工业、信息产业、汽车工业和钢铁工业等行业。目前，钨资源短缺，钨合金价格高、用量大，因此各国都把废弃的钨合金作为宝贵的第二钨资源加以再生利用。本文综述了钨合金的再生利用现状，分别总结了硬质合金、高比重合金、钨铜合金和钨材的再生利用技术，并利用生态环境材料的观点。对每种再生利用技术作了简单的评价。