The parameterized level set method for structural topology optimization with shape sensitivity constraint factor

In recent years, the parameterized level set method (PLSM) has attracted widespread attention for its good stability, high efficiency and the smooth result of topology optimization compared with the conventional level set method. In the PLSM, the radial basis functions (RBFs) are often used to perform interpolation fitting for the conventional level set equation, thereby transforming the iteratively updating partial differential equation (PDE) into ordinary differential equations (ODEs). Hence, the RBFs play a key role in improving efficiency, accuracy and stability of the numerical computation in the PLSM for structural topology optimization, which can describe the structural topology and its change in the optimization process. In particular, the compactly supported radial basis function (CS-RBF) has been widely used in the PLSM for structural topology optimization because it enjoys considerable advantages. In this work, based on the CS-RBF, we propose a PLSM for structural topology optimization by adding the shape sensitivity constraint factor to control the step length in the iterations while updating the design variables with the method of moving asymptote (MMA). With the shape sensitivity constraint factor, the updating step length is changeable and controllable in the iterative process of MMA algorithm so as to increase the optimization speed. Therefore, the efficiency and stability of structural topology optimization can be improved by this method. The feasibility and effectiveness of this method are demonstrated by several typical numerical examples involving topology optimization of single-material and multi-material structures.

     

Modeling polypharmacy effects with heterogeneous signed graph convolutional networks

Applied Intelligence - Pharmaceutical drug combinations can effectively treat various medical conditions. However, some combinations can cause serious adverse drug reactions (ADR). Therefore,...     

Influential facilities placement over moving objects

Distributed and Parallel Databases - In this paper we propose and study the problem of k-Collective influential facility placement over moving object. Specifically, given a set of candidate...     

基于CPLD的某型导弹测角仪视频信号模拟

针对导弹检测系统的训练和计量,采用CPLD技术设计了某型导弹电视测角仪视频信号模拟系统;介绍了测角仪的视频显示方式和模拟信号产生原理,并给出了CPLD主要的内部逻辑电路和VHDL语言描述;将视频信号分解为同步信号、固定图像和可控实心圆,以行计数器和列计数器构成图像的时间基准,通过对行、列计数器的编码实现同步信号和固定图像,通过对可逆计数器及行、列计数器的运算实现可控实心圆,并对可逆计数器的数据进行编码构成变焦数据,最终精确地实现了测角仪视频信号及其变焦数据输出的模拟。     

基于强跟踪滤波器的开关变换器故障诊断

Buck变换器又称降压变换器、串联开关稳压电源、三端开关型降压稳压器。广泛用于计算机、家用电器、控制系统和通信系统中的电源几乎都是开关电源,具有超快速负载动态响应、高功率变换效率、高功率密度、低电压、大电流的特性.开关变换器作为它的主要电路,故障率较高,对它故障诊断研究是有意义的。基于强跟踪滤波理论,给出了一种开关变换器电路故障实时诊断的一种方法。该方法以建立一种开关变换器电路状态空间模型为基础,利用强跟踪滤波器对电路状态及元件参数进行估计,当元件参数发生软、硬型故障时,根据强跟踪滤波器对元件参数的跟踪结果及修正的Bayes分类算法,可实时诊断开关变换器电路中的元件故障。仿真结果证明了该方法的有效性。     

刑法视角下计算机犯罪概念的辨析

本文首先简要的介绍了几种关于计算机犯罪定义的学说,然后对刑法意义上的＂计算机犯罪概念＂进行了定位,最后论述了计算机犯罪的犯罪构成,为刑法理论和司法实践中准确认定该类犯罪提供了具体依据。     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

金选别工艺的发展与深化

本文阐述了充分考虑矿石性质,探索出混合浮选的分步流程,恰当的施用多元扑收剂所产出的“协同效应”,稳定和强化选别工艺,收到提高选金技术指标的效果。     

三维微细电火花加工系统设计及实验研究

研究开发的三维微细电火花加工系统，包括微进给运动控制机构、高频微能脉冲电源、加工状态检测等关键环节。在工控机和相应板卡的硬件平台上，构建出基于Linux和RTLinux的数控系统，该系统对CAM的NC数据进行预处理，加入电极补偿和轨迹规划环节，从而实施三维微细结构样件的加工。     

Study on heat conduction and adsorption/desorption characteristic of MIL-101/few layer graphene composite

Journal of Porous Materials - Aiming at the poor heat conduction performance of porous MIL-101 applied in adsorption cooling process, few layer graphene (FLG) was selected as a promising thermal...