创新是企业发展的动力源泉

结合近年来济钢的创新实践,就创新在企业中的四个内涵：观念创新、技术创新、制度和机制创新、管理创新等分别展开讨论,指出创新是企业发展的动力源泉。     

ZnCl2-assisted Synthesis of ZnSe Polycrystal

A chemical-assisted element direct-reaction method is developed to synthesize ZnSe compound semiconductor material at a relatively low temperature (～1000 C). ZnSe polycrystal was obtained in the closed-tube systems with Zn-Se, Zn-Se-Zn(NH3)2Cl2, Zn-Se-NH4Cl and Zn-Se-ZnCl2. The as-synthesized samples were tested by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and analyzed by thermodynamic numerical method. The results demonstrate that the synthesis efficiency is higher than 99.96% for Zn-Se-ZnCl2 system at around 1000 C for 3 weeks. It also exhibits that not only temperature, but also low apparent ratio of volume and surface area of the source materials and higher ZnCl2 content are required to achieve high synthesis efficiency. A SeCl transporting reaction synthesis process is proposed based on the thermodynamic analysis.     

碳纤维增强碳化硅陶瓷基复合材料的研究

使用CVD技术提高纤维增强陶瓷基复合材料的密度是很困难的,因为它很难使反应气体完全渗入到基体里面.这是由于"瓶颈"效应所致,即CVD过程阻塞了基体表面的小气孔,进而封闭了通向大气孔的入口.为此,提出一种新的方法位控CVD(PCCVD),来克服上述困难.通过控制反应气体通道位置和试样的加热位置,从而达到控制沉积位置,使沉积界面始终处于开孔状态.使用PCCVD技术制造的C/SiC复合材料,实际密度可达其理论密度的96%.     

Wire-in-Wire TiO2/C Nanofibers Free-Standing Anodes for Li-Ion and K-Ion Batteries with Long Cycling Stability and High Capacity

Wearable and portable mobile phones play a critical role in the market,and one of the key technologies is the flexible electrode with high spe-cific capacity an...     

Unsourced Multiple Access for 6G Massive Machine Type Communications

Unsourced multiple access(UMA) is a multi-access technology for massive, low-power, uncoordinated, and unsourced Machine Type Communication(MTC) networks. It ensures transmission reliability under the premise of high energy efficiency.Based on the analysis of the 6G MTC key performance indicators(KPIs) and scenario characteristics,this paper summarizes its requirements for radio access networks. Following this, the existing multiple access models are analyzed under these standards to determine U...     

PGL-CIMS的设计与开发

本文介绍了平果铝业公司CIMS的系统结构、网络结构、软件结构、关键技术等一系列技术问题。     

射频电容液位计在海上溢油液位检测中的应用

简单介绍了射频电容液位计进行油水双液位检测的基本原理,阐述了海上溢油回收检测装置的基本构造及其工作过程。针对海上特殊应用环境的测量需求,提出分别按油、按水标定的液位检测方案。油水混合状态下,对2组实验测试数据进行误差和线性度的数值计算,通过曲线拟合对比分析,最终确定了海上溢油回收集油箱油位检测的最优化方案—按油标定检测。实验证明,该方案可以满足现场实际测量环境的要求,液位计的测量精度高、线性度好。     

元宝山电厂快控汽门的研究与实施

在分析和介绍元宝山电厂和辽西电网情况的基础上，着重介绍了对元宝山电厂３００ＭＷ机组实施快控汽门的研究、试验工作及主要的技术成果。该厂３００ＭＷ机组快控汽门方式的投入，提高了电网稳定性和经济效益。     

便携式峰值功率分析仪核心设计

介绍了峰值功率分析仪的基本结构、主要模块的设计以及实现,论述了微波信号处理、信号峰值检波、信号采样和数据处理、测频以及频响误差补偿技术与校准、系统软件实现原理.提出了一种便携式峰值功率分析仪的设计方案.按照该方案设计的便携式峰值功率分析仪实现了对射频信号功率的准确快速测量.     

《精细化工工艺》课程教学改革的研究

文章论述了合理组织教材以突出教材的重点,凸显知识体系的规律性;精讲教材内容,使学生抓住精细化工的实质;课堂教学与实验内容相结合以增强学生对精细化工理论和实验的理解;把科研内容引入教学中以激起学生的学习兴趣及对科学知识探求的热情;充分利用外部教学条件,把教学与精细化工生产实际结合起来,以培养学生的实际技能等方面的内容。