Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

Escherichia coli prlC gene encodes a trypsin-like proteinase regulating the cell cycle

BACKGROUND AND PURPOSE: Mood disorders are common after stroke and may impede physical, functional, and cognitive recovery, making early identification and treatment of potential importance. We aimed to compare the accuracy of the General Health Questionnaire (GHQ-30) and the Hospital Anxiety and Depression (HAD) Scale in detecting psychiatric morbidity after stroke and to determine the most suitable cutoff points for different purposes. METHODS: One hundred five hospital-referred stroke patients completed both the GHQ-30 and HAD Scale 6 months after onset before a blinded psychiatric assessment in which the Schedule for Affective Disorders and Schizophrenia with some supplementary questions was used to determine a DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) diagnosis. Measures were compared in terms of sensitivity, specificity, and receiver operating characteristic curves. RESULTS: No significant differences were found between the GHQ-30 and the HAD Scale in identifying those patients with any DSM-IV diagnosis (P=0.95), grouped depression (P=0.56), or anxiety (P=0.25) disorders. The previously recommended cutoff points for identifying "cases" for the GHQ (4/5) and for the HAD Scale (8/9 and 11/12) were found to be suboptimal in this population. CONCLUSIONS: The GHQ-30 and HAD scale exhibited similar levels of sensitivity and specificity. Data are presented, taking into account the "cost" of false-positives and negatives, to allow a choice of cutoff points suitable for differing situations.     

The effect of curing on the crystallization of poly(phenylene sulfide)

Summary Poly(phenylene sulfide) (PPS) was cured in the melt and solid states under air and/or nitrogen environments. Crystallization behavior of such cured materials as a function of cure time at 320°C and 255°C was studied via differential scanning calorimetry. It was found, on general, that while short-time curing leads to an increase in crystallization rate, prolonged curing leads to a decrease in both crystallinity and crystallization rate. In contrast to the enhanced crystallization rate caused by curing in nitrogen at the melt state, no significant change of crystallization rate is observed while curing is done in the solid state (in nitrogen).     

A relativistic extension of the complex scaling method using oscillator basis functions

We develop the complex scaling method within the relativistic framework by expanding the Dirac spinors in the complete set of eigensolutions of a harmonic oscillator potential, and present the theoretical formalism of describing the discrete bound and resonant states on the same footing. Based on a well established and frequently used model, we demonstrate the utility and applicability of the extended method and examine the stability of the results with respect to the variations of the parameters of the model. Satisfactory agreements are found for all the calculated results in comparison with some other calculations in references. Especially, the present calculation in the nonrelativistic limit gives a consistent result with that in the nonrelativistic calculation.     

基于无线网络技术的燃气集抄系统设计

针对燃气行业人工抄表费时费力等问题,提出一种基于GPRS和无线多跳网络技术的燃气无线抄表系统,在分析传统抄表系统的结构以及传输方式优缺点的基础上介绍了系统的总体结构、工作原理以及各部分组成和功能。采用计算机网络和数据库等技术,使得该系统具有功能强大、使用方便、可扩展性好等特点,可实现对整个燃气输配系统的监控,有效提高燃气公司的管理水平和服务效率。     

A two-level strategy for segmenting center of interest from pictures

Segmenting center of interests (COIs) from pictures is an important but highly challenging problem for researchers in computer vision and image processing. The capability of understanding the meanings of pictures by computers can lead to breakthroughs in a wide range of applications including Web image search and online picture-sharing communities. In this paper, a two-level strategy is presented, which consists of a rough segmentation stage and a fine segmentation stage. In the first level, a picture is partitioned into four regions by using a block clustering method based on color and texture features, and the COI within the picture is distinguished from the background according to the principles of photographic composition. This stage aims to determine the approximate region of the target. In the second level, a novel active contour model is established based on shape information and vector method, where the image energy is defined by a hue gradient and the external energy is generated from either a triangular inner force or a supplementary force. This stage tries to extract the boundary of the target accurately. Experimental results on photos downloaded from the Internet show the feasibility and effectiveness of the proposed method.     

一种基于自适应量化嵌入器的隐写方法

感知质量和容量一直是图像隐写算法设计中难以折中的两个要素,如何取得更好的综合性能已吸引了很多研究者的兴趣.提出一种基于自适应量化嵌入器的隐写方法.这一方法通过改变某一载体信号所在子空间的索引来调制秘密信息,自适应特性体现在决定着子空间尺寸的分割码本的设计上.将这种隐写方法用于以2×2图像块为单元的数字图像隐写算法设计中,并将分割码本设计得具备HVS特性以取得较好的折中效果.实验表明,算法在感知质量和容量方面具有较好的综合性能.     

一种基于组策略的过滤式特征选择算法

MRMR算法具有快速、高效等优势,在处理高维数据方面较为流行。基于此,提出一种基于组策略的MRMR改进算法（MRMRE）,该算法不仅考虑单个特征属性的相关性与冗余性,同时针对特征组间的相互关系进行研究。算法以MRMR算法为框架,以CCA作为度量基准,选择SVMs作为基分类器,使其特征选择效果提升。在UCI机器学习数据库中图像与基因序列数据集上的大量实验表明：与MRMR算法相比,所提出的算法其特征选择结果具有更高的结果稳定性与分类精度。     

Wireless channel extraction analyzing based on graph theory

Wireless channels comprise various signal characteristics that correspond to different features. This research applies digital signal processing to first excavate and categorize various features found in the channel data. Then, borrowing from graph theory, fast clustering analysis and decision tree modeling are introduced to identify unique “fingerprint” characteristics. Finally, two scenarios were tested using artificial neural networks to identify and verify their applicability in different geographical locations.