秦山核电厂气载放射性释放的环境影响

本文评价了秦山核电厂气载放射性流出物对环境的影响。应用现场及风洞大气扩释实验结果和厂址周围的人口与食谱调查资料,估算了秦山核电厂在正常运行和事故条件下释放的气载放射性流出物对公众产生的个人有效剂量当量和集体有效剂量当量。计算结果表明,正常运行时厂址边界(0.5km)处的最大个人有效剂量当量为2.7×10~(-2)mSv/a,该剂量的大部分来自~(137)Cs 的食入(主要由地表湿沉积引起);80km 范围内的集体有效剂量当量为1.1人·Sv/a,归一化集体有效剂量当量为3.7人·Sv/GW(e)·a。文中还给出了事故情况下剂量估算结果。     

Direct analysis of transient stability: Experience with the Taipower system

A direct method for transient stability analysis of a multimachine power system is presented. Emphasis is placed on the detailed development and evaluation of the proposed method in transient stability assessment. An energy-type Lyapunov function, taking into account the effect of transfer conductance, is introduced first. The potential energy boundary surface method is then adopted to determine the critical energy value quickly. The main computational burden in the direct method lies in the reduction of the admittance matrices. In this paper, an efficient reduction technique incorporating the sparsity technique and compensation theory is developed. Finally, the proposed method was tested on the Taipower system, which is the only power system in Taiwan. The results obtained confirm the validity and accuracy of the proposed method, and hence demonstrate the superiority and potential of the direct method in real power system applications.     

FM subcarrier fiber optical transmission system design and itsapplication in next-generation wireless access

This paper presents a design method of optical frequency modulation (FM) subcarrier (with super carrier) transmission modem. The nonideal link characteristics, including laser chirping, fiber dispersion, voltage controlled oscillator (VCO) phase noise, relative intensity noise (RIN), and equivalent network model of laser diode of such a system that may bring about signal distortion are discussed first. We then propose a hierarchical methods to establish the system equivalent model. Finally this FM modem is applied to a GSM wireless system, in which multichannel signals are transmitted over fiber between radio port and basestation, and system performance is appraised by its dynamic range. It is found that optical FM subcarrier (with super carrier) transmission technique can improve the system dynamic range, compared with the intensity modulated direct detection (IMDD) method, and this is a economical and efficient method     

Design optimization with static and dynamic displacement constraints

A design optimization procedure using a sequential linear programming technique is proposed in this paper to design minimum weight structures subjected to frequency response and static displacement constraints. The merit of the proposed approach is that the reanalyses of the static and dynamic responses, as well as the computations of the static and dynamic sensitivity data, are performed in a reduced approximate model. A significant saving of computer time for large scale structures is expected. Two numerical examples show good results of this method.     

Adaptive predictive control algorithm based on Laguerre Functional Model

Laguerre Functional Model has many advantages such as good approximation capability for the variances of system time‐delay, order and other structural parameters, low computational complexity, and the facility of online parameter identification, etc., so this model is suitable for complex industrial process control. A series of successful applications have been gained in linear and non‐linear predictive control fields by the control algorithm based on Laguerre Functional Model, however, former researchers have not systemically brought forward the theoretical analyses of the stability, robustness, and steady‐state performance of this algorithm, which are the keys to guarantee the feasibility of the control algorithm fundamentally. Aimed at this problem, we introduce the principles of the Incremental Mode Linear Laguerre Predictive Control (IMLLPC) algorithm, and then systemically propose the theoretical analyses and proofs of the stability and robustness of the algorithm, in addition, we also put forward the steady‐state performance analysis. At last, the control performances of this algorithm on two different physical industrial plants are presented in detail, and a number of experimental results validate the feasibility and superiority of IMLLPC algorithm. Copyright © 2005 John Wiley & Sons, Ltd.     

STUDY ON RESIDUES OF ~（14）C－FENITROTHION IN MODEL RICE－FISH ECOSYSTEM AND FIELD RICE－FISH ECOSYSTEM

ＳＴＵＤＹＯＮＲＥＳＩＤＵＥＳＯＦ~（１４）Ｃ－ＦＥＮＩＴＲＯＴＨＩＯＮＩＮＭＯＤＥＬＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＡＮＤＦＩＥＬＤＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＺｈａｎｇＺｈｏｎｇｌｉａｎｇ（张仲良）；ＷａｎｇＨｕａｘｉｎ（王化新）；Ｇ?..     

高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

Protocol design and performance analysis for manufacturing messagespecification: A Petri net approach

The manufacturing message specification (MMS) is the ISO standard communication protocol specific to manufacturing. To analyze MMS design and performance, service unit automats are introduced to represent individual MMS services, while service connection Petri Nets (PNs) are constructed from these automats to describe MMS service connections and processes. This approach makes MMS protocol specification and analysis possible in terms of well-developed concepts and methods in PN theory. It leads to a distributed and hierarchical model of MMS software system by integrating service connection PNs. A generalized stochastic PN for MMS performance evaluation is obtained by incorporating service parameters and time factors into the model. A technique based on T-invariants is used to simplify the performance analysis     

Suppression of boron penetration in p+ polysilicon gateP-MOSFETs using low-temperature gate-oxide N2O anneal

It has been reported that high-temperature (~1100°C) N₂ O-annealed oxide can block boron penetration from poly-Si gates to the silicon substrate. However, this high-temperature step may be inappropriate for the low thermal budgets required of deep-submicron ULSI MOSFETs. Low-temperature (900~950°C) N₂O-annealed gate oxide is also a good barrier to boron penetration. For the first time, the change in channel doping profile due to compensation of arsenic and boron ionized impurities was resolved using MOS C-V measurement techniques. It was found that the higher the nitrogen concentration incorporated at Si/SiO₂ interface, the more effective is the suppression of boron penetration. The experimental results also suggest that, for 60~110 Å gate oxides, a certain amount of nitrogen (~2.2%) incorporated near the Si/SiO₂ interface is essential to effectively prevent boron diffusing into the underlying silicon substrate