Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.     

Synthesis and self-assembly of hyperbranched polyester peripherally modified by touluene-4-sulfonyl groups

In this paper, hyperbranched polyesters (HPs) were synthesized in the molten state from 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) and 2-ethyl-2-hydroxymethyl-1,3-propanediol (TMP) using acid catalysis. The modified hyperbranched polyesters were obtained through the chemical modification of the hyperbranched polyester cores by substituting a controlled fraction of the terminal hydroxyl groups with touluene-4-sulfonyl chloride using triethylamine (TEA) as an acceptor of HCl. The resultant polyesters were characterized by ¹H NMR, ¹³C NMR, FT-IR, UV and GPC and their self-assembly behaviors were investigated. The results revealed that self-assembled structures could be formed in selected solvents (trichloromethane/acetone or trichloromethane/n-hexane).     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

发酵工厂中空气净化工艺的合理选择

从节能、降低成本、优化工艺的角度，对无菌空气制备过程中，空气预处理流程的选择、空气净化设备、过滤介质以及设备的遴选进行探讨，以实现工艺和工程设计的优化结合。     

金属间化合物的研究现状及其最新发展趋势

主要介绍了金属间化合物的概念、发展历程、研究现状及几种常用金属间化合物的发展状况，并提出了该类材料的最新发展趋势。     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

Word的高级应用——制作表单

通过实例,详细讲解用Word的窗体工具建立表单,以解决行政部门制作电子文档的空白表格时,让填写的人员方便、快捷地填写内容,又不随意修改(破坏)原有格式和原文。     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

基于PXI总线的LVDS数据采集存储模块的设计

鉴于SAR原始数据量大以及数据传输速率限制的问题,设计了基于PXI的雷达回波和图像数据实时记录模块。大容量数据采集记录系统基于通用的商业PC平台设计,选用FPGA作为主控芯片对电路整体逻辑进行控制;利用LVDS作为数据传输接口对数据进行接收,实现了数据采集、缓存以及通过PXI总线上传至上位机硬盘,以便后续处理。文中介绍了系统方案的总体设计,以及采集存储硬件电路的设计,并对电路的关键技术给以详细的分析。     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.