添加煤沥青提高焦炭强度的研究

本文进行了煤和煤沥青共炭化试验,将煤沥青添加到20kg焦炉内进行炼焦试验。结果表明,煤沥青对武钢用煤有一定的改质作用,添加煤沥青可提高焦炭强度。     

Groups of algebraic integers used for coding QAM signals

Linear block codes over Gaussian integers and Eisenstein integers were used for coding over two-dimensional signal space. A group of Gaussian integers with 2²ⁿ elements was constructed to code quadrature amplitude modulation (QAM) signals such that a differentially coherent method can be applied to demodulate the QAM signals. This paper shows that one subgroup of the multiplicative group of units in the algebraic integer ring of any quadratic number field with unique factorization, modulo the ideal (Pⁿ), can be used to obtain a QAM signal space of 2p^2n-2 points, where p is any given odd prime number. Furthermore, one subgroup of the multiplicative group of units in the quotient ring Z[ω]/(pⁿ) can be used to obtain a QAM signal space of 6p^2n-2 points; one subgroup of the multiplicative group of units in the quotient ring Z[i](pⁿ) can be used to obtain a QAM signal space of 4p^2n-2 points which is symmetrical over the quadrants of the complex plane and useful for differentially coherent detection of QAM signals; the multiplicative group of units in the quotient ring Z[ω]/(2ⁿ) can be used to obtain a QAM signal space of 3·2^2n-2 points, where i=√-1, ω=(-1+√-3)/2=(-1+i√3)/2, p is any given odd prime number, Z[i] and Z[ω] are, respectively, the Gaussian integer ring and the Eisenstein integer ring. These multiplicative groups can also be used to construct block codes over Gaussian integers or Eisenstein integers which are able to correct some error patterns     

Electron microscopic observations and DNA chain fragmentation studies on apoptosis in bone tumor cells induced by ~(153)Sm-EDTMP

ＥｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｉｃｏｂｓｅｒｖａｔｉｏｎｓａｎｄＤＮＡｃｈａｉｎｆｒａｇｍｅｎｔａｔｉｏｎｓｔｕｄｉｅｓｏｎａｐｏｐｔｏｓｉｓｉｎｂｏｎｅｔｕｍｏｒｃｅｌｓｉｎｄｕｃｅｄｂｙ１５３ＳｍＥＤＴＭＰＺｈｕＳｈｏｕＰｅｎｇ，Ｘｉａ...     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

Synthesis of Iron-Based Laves Phase Containing Praseodymium Magnetostrictive Materials

The synthesis and magnetostriction of PrxTb1-x.Fe2, PrxTb1-x Fe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys were investigated in this study. The addition of boron or cobalt atom in PrxTb1-xFe2 could effectively prevent the formation of non-cubic phases, and Pr concentration limit was successfully increased from 0.2 to 0.4. X-ray step scanning for the PrxTb1-xFe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys showed that PrFe2 possessed a large spontaneous magnetostriction λ1111.     

PLANTSCAPE系统在长庆银川配气站的应用

银川配气站是长庆油田公司采气一厂下属配气站之一,地处宁夏银川市长庆石油基地,肩负着向近10家天然气用户供气的任务,供气量也逐年增大,旧的生产模式(如双波纹管流量计量)已不能满足生产的需求。所以我们引进了HONEYWELL公司的PLANTSCAPE工业控制系统,该系统达到国际先进水平,在国内属于领先地位。伴随着气田的大规模开发,外供气量的逐年增加,此系统必将发挥更大的作用,对长庆气田的可持续发展具有十分重要的意义。     

军械调运方案优化算法的设计与仿真

军械调运问题的数学模型和手工算法过去已有研究,但是当问题较为复杂时,手工算法就要花费大量时间而且准确性也难以保证。针对这一缺陷,本文在已有的数学模型和手工算法的基础上,设计了一种可以用计算机实现的基于递归的算法来寻求军械紧急调运问题的最优方案,并使用面向对象的java语言将算法实现。     

非数值化产品形位描述模型

传统的形状及位置表示模型通常是建立在低层次的无应用意义的几何拓扑元素之上，因而无法很好地支持计算机辅助设计（ＣＡＤ）向实用化和智能化方向发展。本文提出了一种非数值化的基于约束的产品形位描述模型，并对该模型中存在的一些问题进行了深入的讨论。该模型符合设计人员实际设计思维与过程，同时也支持高层次产品设计信息以及产品的设计过程信息，因而为传统ＣＡＤ系统向新一代实用化智能化ＣＡＤ系统过渡提供了一个良好的产品形位表示模型。     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.