（1S，2S，5R）-薄荷基取代烯烃的合成

以(L)-薄荷基氯为原料,通过薄荷基氯化镁分别与烯丙基溴、2-甲基-3-氯丙烯、1-溴-3-甲基-2-丁烯在Cul催化下发生偶联反应,首次合成了3-(1S,2S,5R)-薄荷基-1-丙烯,2-甲基-3-(1S,2S,5R)-薄荷基-1-丙烯和2-甲基-4-(1S,2S,5R)-薄荷基-2-丁烯,总收率分别为80.5%、83.1%和79.6%.探讨了影响反应的多种因素,找到了较好的合成条件,并用IR、 1HNMR和元素分析对产物进行了表征.     

赋予针织服装个性魅力的女红工艺

将富于变化的女红工艺与单调的针织服装相结合，会使针织服装由平淡变为丰富，由呆板变为活泼。文章论述了在针织服装中运用女红图案、色彩、材料、针法的原理。     

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

Experiments were performed to investigate the heat transfer characteristics of a row of three premixed, laminar, butane/air flame jets impinging on a water-cooled flat plate. The between-jet interference was found to reduce the heat transfer rate in the jet-to-jet interacting zone due to the depressed combustion. The interference became stronger when the jet-to-jet spacing and/or the nozzle-to-plate distance were/was small. The positive pressure existed in the between-jet interacting zone caused the asymmetric flame and heat transfer distribution of the side jet. The meeting point of the spreading wall jets of the central and the side jets did not occur at the midpoint of the neighboring jets, but at a location shifted slightly outwards. The maximum local heat flux and the maximum area-averaged heat flux occurred at a moderate nozzle-to-plate distance of 5d with a moderate jet-to-jet spacing of 5d. The lowest area-averaged heat flux was produced when both the jet-to-jet spacing and the nozzle-to-plate distance were small. Comparing with a single jet under the same experimental conditions, the heat transfer rates in both the stagnation point and the maximum heat transfer point were shown to be enhanced in a row of three-jet-impingement system. The present study provided detailed information on the heat transfer characteristics of a row of three in-line impinging flame jets, which had rarely been reported in previous study.     

含钡合金的生产及其对钢液脱氧行为的研究

介绍了含钡合金的生产状况。在MoSi2炉上对钢管钢进行了含钡合金脱氧行为的研究，然后在150tLF／VD精炼设备上进行了使用含钡合金的工业试验。研究中主要选取SiAlBa、SiCaBa、SiAlBaCa、SiAlBaCaSr及用于钙处理的SiCa包芯线，并选用Al和FeSiAl作为对比脱氧剂，分别考察了实验室条件下和实际生产过程中，采用钡系合金对钢液脱氧的全氧含量，脱氧产物的分布、尺寸和形貌，探讨了钡系合金脱氧和对夹杂物的变质作用的机理。     

高速电路中地电流的影响及其对策

从理论上分析了产生地电流干扰的原因，从而在实践上提出了一些经常被忽略，却是行之有效的方法来减小地电流的干扰，设计出高质量的电路。     

Category Norms as a Function of Culture and Age: Comparisons of Item Responses to 105 Categories by American and Chinese Adults.

Understanding how aging influences cognition across different cultures has been hindered by a lack of standardized, cross-referenced verbal stimuli. This study introduces a database of such item-level stimuli for both younger and older adults, in China and the United States, and makes 3 distinct contributions. First, the authors specify which item categories generalize across age and/or cultural groups, rigorously quantifying differences among them. Second, they introduce novel, powerful methods to measure between-group differences in freely generated ranked data, the rank-ordered logit model and Hellinger Affinity. Finally, a broad archive of tested, cross-linguistic stimuli is now freely available to researchers: data, similarity measures, and all stimulus materials for 105 categories and 4 culture-by-age groups, comprising over 10,000 fully translated unique item responses. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

BioMEMS和人体植入式生物微系统

MEMS技术在医药科学技术的一个重要应用是植入人体内的生物微系统(BioMEMS)。该系统集微传感器、微驱动器、微流体系统、微光学系统及微机械元件于一体,用于体内器官的诊断、体内器官功能修复或替代,其治疗效果确切,已成为关系本世纪医学与人类健康进步的重要领域。本文介绍了近年来不同功能类别植入式BioMEMS的发展状况,说明了MEMS工艺、方法及材料在此领域的应用。